640448
10
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
18 19
3. Video recording
Manual recording:
Press the “Record” key once in preview mode to start recording. The video recording duration will be displayed at
the bottom right of the TFT display screen, the “Green Indicator of Video/Voice Recordingand the front “Green
Video Recording/Shooting Indicator” will flash slowly, and the recording duration on the LCD segment screen
will be displayed normally. The video recording process will only respond to the zoom function (” key). When the
“stop” key is pressed, the system will stop and save the current video recording file, the front green indicator light
will turn off, the camera will return to the preview state, and the recording duration on the LCD segment screen
will disappear.
Note: If you turn the power off during video recording, the system will save the current file recorded before
it shuts down
Note: If the battery power is low during video recording, the system will save the current file recorded and show
the message “Low Battery” on the TFT display screen until the camera is turned off or it automatically enters
standby mode
Note: If the memory space becomes full during video recording, the system will save the current file recorded,
show the message “Card Full” on the TFT display screen and return to the preview mode. The video recording
duration on the LCD segment screen will also disappear
Note: When the “+” or “–” keys are pressed in voice recording mode, the voice increasing/reducing operation
will not be executed, however when the “+” or “” keys are pressed when recalling audio files, the voice
increasing/reducing operation will be executed
[...continued] System parameter setting
8. Factory default: This operation restores the parameter settings to the factory default. If restoring the factory
default, the system will set the time to 01.01.2012
9. Language: Press the “<” or “>” key to choose your desired language
10. Frequency: Select the frequency to 50 Hz or 60 Hz, depending on local grid frequency, in order to avoid the
screen flickering in preview mode or in video recording
11. Date/Time: The time can be adjusted and changed. It will be displayed on the bottom right corner of the video
file or photo file when recording or shooting
Note: Press the “M” key in the submenu to exit
Using the camera
1. Insert a micro SD card.
2. Turn the power switch to the “ON” position to turn on the camera. The red indicator will light up and the camera
will enter the preview mode.
Note: If the battery power is low, the battery icon
and the message “Low Power” will be shown on the TFT screen
Note: If no micro SD card is inserted, you will see the micro SD card icon
on the TFT screen
[continued...]
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kitvision Edge HD10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kitvision Edge HD10 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Kitvision Edge HD10

Kitvision Edge HD10 Gebruiksaanwijzing - Nederlands - 18 pagina's

Kitvision Edge HD10 Gebruiksaanwijzing - Deutsch - 18 pagina's

Kitvision Edge HD10 Gebruiksaanwijzing - Français - 18 pagina's

Kitvision Edge HD10 Gebruiksaanwijzing - Espanõl - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info