640448
9
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
16 17
b. Parameter setting for photo shooting
1. Image resolution
8.0 MP 3200 x 2400p 4:3
5.0 MP 2592 x 1944p 4:3
3.0 MP 2048 x 1536p 4:3
2. Capture mode
Single shot: The shooting mode is automatically set to single shot each time the camera is turned on.
Pressing the “Shutter” once will take one photo
Triple shot: Pressing the “Shutter” once will take three consecutive photos
Time-lapse mode: Takes one photo every 2s/3s/5s/10s/20s/30s until they key is pressed to stop, the card
is full or the power has run out
Self-timer mode: Select the self-timer delay time (0s, 5s or 10s), then press the “M” key to return to the
“Preview” state. Press the “Shutter” key once to start the timer. The self-timer indicator will
flash at the end of the delay time and take one photo. The system will then automatically
recover the shooting mode to single shooting. If the “Self-timer Delay Time” has been set,
but the unit is restarted without pressing the “Shutter” key, the machine will auto set the
“Self-timer Delay Time” to 0 seconds
Note: Single shot, Triple Shot, Time-lapse mode and Self-timer modes cannot be activated at the same time
c. System parameter setting
1. Beep: Turning the key tones on or off
Note: The camera will still beep when you start and stop a video recording. This cannot be turned off
2. Green indicator light: Please turn it on or off before self timing; the default setting is “ON
3. Time display: Please set before using. The camera will auto record the shooting date and time of an image and
display it in the bottom right corner of the file
4. Loop coverage: When “ON”, the video/audio file will be automatically saved in a segment once every 15 minutes.
If it is not set, the video/audio file will be automatically saved in a segment once every 30 minutes.
Note: The video length is actually determined by the file size, not the length of time. For example: When Loop
coverage is on for 15 minutes, if filming in a dark environment the video may record for a little longer than 15
minutes
5. Auto standby: Select the auto standby time to OFF, 2 minutes, 5 minutes or 10 minutes. Once selected, if there is
no operation, the timer will start and the camera will turn off input and output to enter standby mode at the end
of the time set. If there is any operation during countdown, the system will re-time. If the video recording or
shutter is operated in the standby process, the camera will wake up. The default standby time is set to OFF
6. TV output format: NTSC or PAL. The video format outputted to TV can be selected. If the selected format is
changed, the camera will restart to update the parameters
7. Format: Once youve confirmed that recorded files do not need to be saved, all files can be removed by formatting
Note: lf there is no card inserted, the memory of the camera will be formatted. When a card is inserted, the card
will be formatted rather than the camera’s memory
[continued...]
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kitvision Edge HD10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kitvision Edge HD10 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Kitvision Edge HD10

Kitvision Edge HD10 Gebruiksaanwijzing - Nederlands - 18 pagina's

Kitvision Edge HD10 Gebruiksaanwijzing - Deutsch - 18 pagina's

Kitvision Edge HD10 Gebruiksaanwijzing - Français - 18 pagina's

Kitvision Edge HD10 Gebruiksaanwijzing - Espanõl - 18 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info