23
SX .1 Series Amplifiers
Operation
EQ MENU - Here you can adjust the single band parametric
equalizer. Your options are
frequency, bandwidth and
boost/cut.
Press the
ENT key to enter the EQ
adjustment menu.
Use the
UP and DOWN keys to
scroll through
frequency, bandwidth
and boost/cut and press the ENT
key to select.
FREQUENCY selects the center frequency of the EQ and can
be set at any 1 Hz spaced frequency from
20 Hz - 200 Hz.
Use the
UP and DOWN keys to
select your frequency. Press the
ESC to return to the EQ menu.
BANDWIDTH (better known as Q) can be set from .5 to 10 in
.5 increments. In simple terms, lower Q effects more
frequencies around the center frequency while higher Q
effects fewer frequencies around the center frequency.
Use the
UP and DOWN keys to
select your Q value. Press the
ESC
to return to the EQ menu.
BOOST/CUT is how much you want to boost or cut the
equalizer and has a range of
-18 dB to + 18 dB in .5 dB
steps.
Use the
UP and DOWN keys to
boost or cut the EQ and then press
the
ESC key to return to the EQ
menu.
When you are done adjusting the
EQ press the
ESC key while in the
EQ
frequency, bandwidth and
boost/cut option menu to return to
the MAIN menu.
NOTE...
While adjusting the EQ you will notice the
EQ indicator on
the ISIS VFD display is lit. This indicates you are in the EQ
menu.
22
SX .1 Series Amplifiers
Operation
Gain MENU - Here is where you adjust your amplifier’s gain
control settings.
Press the
ENT key to enter the GAIN
adjustment menu.
Now use the
UP and DOWN keys
to increase or decrease the gain of
the amplifier in .5 dB increments from
0 dB to +12 dB. (
.0 to 12.0)
Press the
ESC key to return to the
MAIN menu when finished adjusting
the gain control.
NOTE...
While adjusting the GAIN you will notice the
gain indicator
on the ISIS VFD display is lit. This indicates you are in the
GAIN menu.
16.) Reset Amp - This option resets all adjustable
settings back to their original factory defaults.
Use the
UP and DOWN keys to
select
SKIP RESET or DO RESET and
then press the
ENT key to perform
the selected action.
17.)
About - This menu item will display information
about the DAP (Digital Audio Processor) hardware, software
and build date.
Use the
UP and DOWN keys to
view the DSP Version, Software Version,
Hardware Version and Build Date. Press
the
ESC key to return to the MAIN
menu.
