OUT ASSIGN
This menu controls the assignment of the various parts of the instrument on the 4 Audio outputs
available. There are 2 separate modes for the audio assignment, one concerning the keyboard and
the other concerning the General Midi (GM).
Keyboard Out Assign
To gain access to the menu from the main display:
1 Press F 3 – Utility
2 Press Page > to proceed to the second Utility page.
3 Key F 6 – Keyboard Out Assign enables the control function of the outputs for the
Keyboard, or rather over the various parts: Drums, Bass, Chords, Lower, Right, Microphone.
L&R Standard: (F 1)
normal stereo functioning
mode of the keyboard with the Left/Mono 1 and
Right 2 outputs.
L&R Out 3: (F 2) this function is used to send one or
more parts of the instrument to Output 3 using the 2
L/R stereo outputs at the same time.
Use Cursor < > to scroll all the parts and use Value
+ / - to confirm which parts are assigned to Out.3.
The effects remain activated on Left and Right. Output 3 is without effects.
L&R Out 3 & 4: this function is used to send one or more parts of the instrument to either
Output 3 or Output 4. The control is the same as above for L&R Out3.
Using this combination, only the Chorus, Delay and Distorsor effects remain activated on the
Left and Right (the Reverb. is cut out).
Separate 1, 2, 3, 4: this function enables the free assignment of the parts of the keyboard to any
of the 4 Outputs available. Using this combination, all the internal instrument Effects are cut out.
The Cursor is used to select the parts and the Value + / - keys to select the Output.
The Default function restores the initial conditions on each of the Out Assign combinations.
GM Out Assign: Assignment of the separate outputs for the 16 GM parts. To gain access to the
menu from the main display:
1 Press F 3 - Utility
2 Press Page > to proceed to the second Utility page.
3 Press key F 7 – GM Out Assign.
This section controls the assignment of the
outputs on the Percussion sections and on the
16 General Midi parts
The selection of the parts and the assignment of the Outputs is performed in the same way as for
the aforesaid Keyboard Out Assign.
The Default function – F 6 restores the standard mode on each of the combinations.
53
