683161
123
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Managing Different File Types
The following data can be stored as files on this transceiver.
Settings data of the transceiver
Settings data of TX and RX equalizers
Audio data of manual and full-time recordings
Audio data of timer recordings
Screen capture image data (can be stored but cannot be
displayed on this transceiver)
CW, RTTY and PSK communication log data
KNS communication log data (can be stored but cannot be
displayed on this transceiver)
Destination for Saving Files
Files are stored in the built-in memory of the transceiver (maximum
capacity of 1 GB) in the default setting. However, settings can be
changed for files to be saved to a USB flash drive that is connected
to the transceiver.
Copying Files Stored in the Built-in Memory to an
External Source
Files that are stored in the built-in memory of the transceiver can
be copied to a PC that is connected to this transceiver via a USB
cable.
Folder Configuration of the Built-in Memory
When copying files to a PC via a USB cable, the built-in memory
of the transceiver is recognized on the PC as a removable device
with the name “TS-890”. The folder configuration of the “TS-890”
removable device is as follows.
.
TS-890
CAPTURE
DECODE
KNS_LOG
RX_REC
SETTINGS
TIMER_REC
CW
FSK
PSK
DATA
RX_EQ
TX_EQ
Folder for audio files of timer recordings
Folder for TX equalizer data files
Folder for RX equalizer data files
Folder for settings data files
Folder for audio files of manual and constant recordings
Folder for KNS communication log files
Folder for PSK communication log files
Folder for FSK communication log files
Folder for CW communication log files
Folder for captured image files
All the folders above are read-only files. They cannot be
edited or deleted on the PC.
Among the folders above, only those selected by the
operations in “Copying Files to a PC” (see 11-4) will
appear under “TS-890” removable device.
Folder Configuration of the USB Flash Drive
.
Folder for screen saver image files
Folder for audio files of timer recordings
Folder for TX equalizer data files
Folder for RX equalizer data files
Folder for settings data files
Folder for audio files of manual and full-time recordings
Folder for KNS communication log files
Folder for PSK communication log files
Folder for FSK communication log files
Folder for CW communication log files
Folder for captured image files
TS-890
CAPTURE
DECODE
KNS_LOG
IMAGE
RX_REC
SETTINGS
TIMER_REC
CW
FSK
PSK
DATA
RX_EQ
TX_EQ
KENWOOD
Image Files for Use as Screen Savers
Write image files to be used as screen savers (Type 3) in advance
to the “Folder for screen saver image files (IMAGE)” of the USB
flash drive such as via a PC before loading them into the built-in
memory of the transceiver.
For more details on the method of configuration, please
refer to “Configuring the Screen Saver”. (16-1)
Saving Files (For Both USB Flash Drive and Built-in
Memory)
When the date and time are not configured in the CLOCK menu,
the recorded date and time when the file is saved is determined
with the timing at which this transceiver is powered on as
January 1, 2018, 0:00.
A maximum number of 255 files can be stored in each folder.
When trying to save files that exceed this number, an error
occurs and a screen showing “Insufficient Memory Size” is
displayed.
If the USB flash drive is write-protected when writing files to the
USB flash drive, an error occurs and a screen showing
“Insufficient Memory Size” is displayed.
Compatible USB Flash Drives
This transceiver does not come supplied with a USB flash drive.
Use a commercially available USB flash drive.
The USB flash drive needs to be formatted by this transceiver
before it can be used. After formatting is complete, a folder is
automatically created in the USB flash drive. (Formatted to
FAT32)
When formatting is performed, any file that exists on the USB
flash drive will be erased. To prevent data from being lost, back
up the necessary files to devices such as a PC before
formatting.
When a compatible USB flash drive is connected to this
transceiver, any data that is not found in the folder configuration
will be automatically created.
If multiple USB flash drives are connected to this transceiver at
the same time, only the first USB flash drive that is recognized
can be used.
A USB flash drive and USB keyboard can also be
connected at the same time via a USB hub.
The USB-A connector of this transceiver supports the
USB 1.1 standard. The USB flash drive is capable of
running at the Full Speed (maximum 12 Mbps) transfer
rate.
We do not provide guarantee with regard to the operation
and power supply of all USB devices that are
commercially available.
When using an extension cable, make use of one that
complies with the USB standard with a length not longer
than 3 m.
If the power consumption of the connected device
exceeds the allowable current of this transceiver (0.5 A),
a “USB bus power error screen” is displayed.
This transceiver does not support security-enabled USB
flash drives.
USB/FILE MANAGEMENT 11
11 USB/FILE MANAGEMENT
11-1
123

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info