683161
122
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Pressing F5 [SCAN] does not start the scan operation
when the memory groups to be scanned are configured
as follows.
When the checkboxes for all the memory groups are
deselected.
When operating data is not stored in the memory
channels of a memory group, even if the checkboxes
of the memory group are selected.
When all the memory channels belonging to a
memory group are locked out, even if the checkboxes
of the memory group are selected.
Examples on the configuration of All-channel Scan and
Group Scan:
When the checkboxes for Memory Groups 1 and 5 are
selected, pressing F5 [SCAN] activates Group Scan.
In this case, scan is performed on the memory
channels included in Memory Groups 1 and 5.
When the checkboxes for all memory groups are
selected, pressing F5 [SCAN] activates All-channel
Scan.
Memory Channel Lockout
Selected memory channels can be omitted (locked out) in advance
before performing Memory Scan.
1 Press F7 [M.LIST] to display the Memory Channel
List.
2
Press F2 [ ] or F3 [ ], or turn the [MULTI/CH]
control to select a memory channel.
3 Press F6 [L.OUT] to lock out the memory channel.
Lockout is applied to memory channels for which the
“Lockout” checkbox is selected.
Pressing F6 [L.OUT] again cancels the lockout mode.
“L.OUT” lights up in the standard mode screen and
compression mode screen.
.
4 Press [ESC] to end the process.
Quick Memory Scan
Quick Memory Scan allows the registered quick memory channel
to be automatically switched at a specific time interval for
scanning.
1 Press [Q-MR>] to call up a quick memory channel.
.
2 Press F5 [SCAN] to start quick memory scan.
Turning the [MULTI/CH] control allows the scan channel to
jump rapidly to the next or previous channels.
Pressing F5 [SCAN] again or pressing [ESC] ends Quick
Memory Scan.
The scan direction is fixed at the ascending order.
Configuring the Conditions for Resuming Scan
Scanning stops when signals are received while performing
Program Scan (VFO Scan) in the FM mode or during Memory Scan
or Quick Memory Scan regardless of the operating mode.
The conditions for resuming the scan operation after it has
stopped can be configured.
Time-operated (Time-operated mode):
Pauses scan for 3 seconds after signals are received. Continues
to pause scan for another 3 seconds if signal reception is still in
progress after 3 seconds.
Scan operation resumes after this interval even if reception is still
ongoing. (The maximum duration for pausing scan using the time-
operated mode is 6 seconds.)
Carrier-operated (Carrier-operated mode):
Pauses scan while signals are received. Scan operation resumes
when signals are not received for a duration of 2 seconds.
Configure in Menu [4-05]
Scan Resume
Setting Value Time-operated (default)/ Carrier-operated
10 SCAN
10-4
122

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info