683161
125
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Reading Settings Data
Follow the steps below to read the settings data file of the
transceiver that is stored in the built-in memory or a USB flash
drive.
To read data from a USB flash drive, insert the USB flash drive
containing the settings data into (USB-A).
1 Press [MENU].
2 Press F [USB/FILE] to display the USB/File
Management menu screen.
If F [USB/FILE] is not displayed, press F [MORE] to display
F [USB/FILE].
3
Press F2 [ ]/ F3 [ ] to select Read
Configuration Data.
4 Press F4 [SELECT].
A screen for selecting the file (DATA) to read appears.
.
Information of the location to read files from (built-in memory
or USB flash drive) that was last selected on this screen is
displayed. However, if a USB flash drive is not connected or
cannot be correctly recognized, information of the built-in
memory will be displayed.
If no file is found, No file is found. is displayed on the
screen.
5 Select the file to read.
To read data from the internal memory, press F7 [INT.MEM].
To read data from the USB flash drive, press F7
[USB.MEM]. (If a USB flash drive is not connected, a message
will appear prompting you to get ready the USB flash drive.)
Pressing F5 [NAME] allows the file name to be changed.
Pressing F6 [DELETE] displays a message to confirm
deletion of the file. Pressing F4 [OK] deletes the file.
6
Press F2 [ ]/F3 [ ] or turn the [MULTI/CH]
control to select the settings data file to read.
7 Press F4 [OK] to display the selection screen
(DATA) for reading the data.
Pressing F7 [CANCEL] ends the operation without reading
a file.
.
8
Press F2 [ ] or F3 [ ], or turn the [MULTI/CH]
control to select a function group to read.
9
Press F5 [ ] to select the checkbox to the left
of the settings data name.
Pressing F5 [ ] again deselects the checkbox.
(Settings data will not be read.)
10 Repeat steps 8 and 9 to select the corresponding
checkboxes for the settings data to read.
11 Press F4 [OK] to start reading the files.
Reading of settings data files with a check mark starts. When
reading starts, a reading in progress screen is displayed.
Pressing F7 [CANCEL] exits the file selection screen
without starting reading and returns the display to the USB/
File Management menu screen.
After the settings data files have been read successfully, a
message indicating that reading is complete is displayed.
12 Press F4 [OK] to end the process.
This transceiver reboots automatically.
Data that are not created by this transceiver cannot be
read.
The following function groups can be excluded from the
reading process.
“Environmental Dependent” data (settings data that
are dependent on the installation environment)
Antenna selection data and preset data of antenna
tuner
Settings for items in menu group 6 (settings related
to the rear terminals)
Advanced menu settings
Linear amplifier menu settings
Transverter settings
LAN menu settings
KNS menu settings and KNS registered users’ list
Clock menu settings
“CW/RTTY/PSK Message Memory” data (CW/RTTY/
PSK message memory)
“Voice Message Memory” data (voice message data)
If the settings data file is saved in a transceiver with a
newer firmware version, pressing F4 [OK] in step 7 will
result in an error. A “data reading error screen due to
mismatch between new and old firmware versions” is
displayed and reading is not executed.
If the settings data file is corrupted, pressing F4 [OK] in
step 7 will result in an error. A “file reading NG screen” is
displayed and reading is not executed.
If data mismatch is detected after reading a settings data
file, a “corrupted data is detected screen” is displayed.
When this occurs, pressing F4 [OK] runs a full reset and
reboots this transceiver.
USB/FILE MANAGEMENT 11
11-3
125

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info