683161
111
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
To copy after adjusting the TX equalizer settings, press F5
[COPY] on the TX Equalizer Adjustment screen.
4
Press F2 [USER1], F3 [USER2] or F4 [USER3] to
specify the destination for saving the settings.
Copying of the TX equalizer settings is complete and the
display returns to the TX Equalizer screen.
Pressing F7 [CANCEL] returns the display to the TX
Equalizer screen without copying the settings.
5
Press and hold F [TX EQ] or press [ESC] to end the
process.
Saving the TX Equalizer Settings
The steps to write the TX equalizer settings data are as follows.
Before doing so, configure the destination for saving the data in
File Storage Location of the “USB/File Management Menu
(11-2) to “Internal Memory” or “USB Flash Drive”.
To save the data to a USB flash drive, insert a USB flash drive
formatted using this transceiver into
(USB-A).
1
Press and hold F [TX EQ] to display the TX Equalizer
screen.
2
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select a characteristic.
.
3
Press F7 [SAVE].
A message indicating that saving is complete is displayed.
.
4
Press F4 [OK].
5
Press and hold F [TX EQ] or press [ESC] to end the
process.
The saved file is named in the “yyyymmdd_hhmmss”
format. The extension of the saved file is “equ”.
(Example) If the date is 10:20:30 a.m., February 15, 2018:
20180215_102030.equ
The name of the destination folder is as follows. (The name
varies depending on the destination for saving files.)
USB flash drive: “KENWOOD\TS-890\SETTINGS\RX_EQ”
Built-in memory: “SETTINGS\RX_EQ”
When removing the USB flash drive, make sure to execute
Safely Removing the USB Flash Drive” (11-6).
Reading the TX Equalizer Settings
The steps to read the TX equalizer settings that are saved in the
internal memory or USB flash drive are as follows.
To read data from a USB flash drive, insert the USB flash drive
containing the TX equalizer data into (USB-A).
1
Press and hold F [TX EQ] to display the TX Equalizer
screen.
2
Press F2[ ] / F3[ ] or turn the [MULTI/
CH] control to select an equalizer characteristic to
read.
.
3
Press F6 [READ] to display the File (TX EQ.) screen.
The File (TX Equalizer) screen appears.
.
To read data from the internal memory, press F7 [INT.MEM].
To read data from the USB flash drive, press F7
[USB.MEM].
Pressing F1 [ ] exits data file selection and returns the
display to the TX Equalizer screen.
Pressing F6 [DELETE] displays a message to confirm
deletion of the file. Pressing F4 [OK] deletes the file.
Pressing F5 [NAME] allows the file name to be changed.
4
Press F2 [ ]/ F3 [ ] or turn the [MULTI/CH]
control to select a file.
5
Press F4 [OK] to read the settings data.
A “reading” message appears while reading is in progress,
which changes to a “reading complete” message when
reading is complete.
6
Press F4 [OK].
7
Press and hold F [TX EQ] or press [ESC] to end the
process.
When removing the USB flash drive, make sure to execute
Safely Removing the USB Flash Drive” (11-6).
The settings data read will be overwritten even if the
equalizer type of the setting application destination
selected in step 2 varies from the equalizer type of the
setting application source selected in step 3.
TRANSMIT FUNCTIONS 8
8-7
111

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info