683161
102
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Touchscreen Tuning
This function enables signals to be received by touching the
desired point in the spectrum scope display area or waterfall
display area.
When in the Auto Scroll mode and Fixed mode, touching a point
moves the marker to the corresponding frequency.
When in the Center mode, touching a point sets the
corresponding frequency as the center frequency.
.
Turning ON/OFF Touchscreen Tuning
Configure in Menu [0-14] Touchscreen Tuning
Setting Value Off/ On (default)
The following operations are prohibited even when
touchscreen tuning is ON.
When the frequency lock function is ON.
When the memory channels are empty or when
temporary change of memory channels is disabled.
When an area outside the frequency range of the
memory channel for specific band segments is
touched.
During transmission.
When the TX frequency is received by TF-SET while
only XIT is ON during simplex operation.
Correction steps for touchscreen tuning
Touch with a finger on the corresponding point in
the spectrum scope or waterfall display screen
where signal is to be received.
Step correction is performed according to the frequency step
size of the [MULTI/CH] control configured in Menu [3-01] to
[3-05] for each mode.
Touching and holding in the CW mode activates the CW auto
tune function.
Step correction is always performed in the FM/AM mode.
For the SSB/CW/FSK/PSK mode, configure to turn ON/OFF
the step correction operation in Menu [8-7] as follows.
Turning ON/OFF Step Correction
Configure to turn ON/OFF the step correction operation during
touchscreen tuning in the SSB/ CW/ FSK/ PSK mode.
Configure in Menu [8-07] Touchscreen Tuning Step
Correction (SSB/ CW/ FSK/ PSK)
Setting Value Off/On (default)
TX/RX Frequency Marker Display
The positions of the TX and RX frequencies are indicated as
markers on the bandscope screen.
During split operation, the TX frequency can be changed easily by
moving the TX frequency marker to the desired frequency while
monitoring the bandscope screen.
The markers are color coded as follows.
White: RX Frequency
Red: TX Frequency
The RX frequency before TF-SET is performed appears
as purple line while [TF-SET] is pressed.
Registering Frequency Marker
When a preferred frequency (up to 50 entries) is registered to the
frequency marker list, the registered frequency is indicated by a
marker on the bandscope (white dotted line). Registering the edge
frequency of the frequency band used in a band plan or during
contesting makes it easier to check the edge frequency on the
bandscope.
1 Press [MENU].
2 Press and hold F [F.MKR] to display the Frequency
Marker list screen.
If F [F.MKR] is not displayed, press F [MORE] to display F
[F.MKR].
.
3 Align with the frequency to register.
4 Press F4 [ADD] to register.
The current VFO frequency is added to the list.
When RIT is ON, the display frequency with RIT added is
registered.
The list is automatically sorted in ascending order starting
from the lowest frequency.
If the frequency to be added is already registered, it will not
be registered twice and there will be no response even when
F4 [ADD] is pressed.
If there are already 50 frequency entries in the list, the
frequency will not be registered and pressing F4 [ADD] will
have no response.
7 SCOPE FUNCTIONS
7-6
102

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info