683161
88
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Configuring the RX Filter
The steps to configure the settings for the different types of RX
filters are as follows.
Selecting a Roofing Filter
A roofing filter helps to reduce strong interference signals that are
next to the target signal.
1 Press and hold [IF FIL] to display the RX Filter
screen.
.
2 Press [IF FIL] or F2 [FILTER] to select an RX filter
(FIL-A/B/C).
3 Press F3 [ROOF].
Pressing F3 [ROOF] each time switches the passband width.
Setting Value
Auto (default)/ 270/ 500/ 2.7 k/ 6 k/ 15 k [Hz]
Auto: A roofing filter with a bandwidth wider than the passband
width of the DSP filter is automatically selected using high
cutoff/low cutoff or Width/Shift. (If there are 2 or more
bandwidths that satisfy the conditions, the narrower one is
selected.)
In the AM mode, a 6 kHz roofing filter is automatically
selected if the high cutoff frequency is 3 kHz or lower, and a
15 kHz roofing filter is selected if the high cutoff frequency
is higher than 3 kHz.
In the FM mode, the option is fixed at 15 kHz and cannot be
changed.
270 Hz is available for selection when the optional
YG-82CN-1 is attached.
Pressing and holding F3 [ROOF] each time switches the
options in the reverse sequence.
The passband width can also be altered by turning the
[MULTI/CH] control.
RFT:xxxx is displayed at the bottom right of the filter scope.
[xxxx:270/ 500/ 2.7k/ 6k/ 15k]
4 Press and hold [IF FIL] or press [ESC] to end the
process.
The IF passband width for the AM mode is twice the
value of the high cutoff frequency.
Example: If the frequency is 3,000 Hz, the IF passband
width will be 6 kHz.
Switching the IF Filter Shape
3 types of IF filter shapes are available for selection according to
the condition of interference and operation.
1 Press and hold [IF FIL] to display the RX Filter
screen.
.
2 Press [IF FIL] or F2 [FILTER] to select an RX filter.
3 Press F4 [IF].
Pressing F4 [IF] each time switches the shape of the filter.
Setting Value
Medium (default)/ Soft/ Sharp
Pressing and holding F4 [IF] each time switches the options
in the reverse sequence.
The filter shape can also be altered by turning the
[MULTI/CH] control.
The IF filter option is displayed as “-” and cannot be altered
in the FM mode.
4 Press and hold [IF FIL] or press [ESC] to end the
process.
Switching the AF Filter Type
3 types of audio frequency passbands are available for selection.
1 Press and hold [IF FIL] to display the RX Filter
screen.
.
2 Press [IF FIL] or F2 [FILTER] to select an RX filter.
3 Press F5 [AF].
Pressing F5 [AF] each time switches the shape of the IF filter.
Setting Value
Medium (default)/ Wide/ Narrow
Pressing and holding F5 [AF] each time switches the
options in the reverse sequence.
4 Press and hold [IF FIL] or press [ESC] to end the
process.
6 REJECTING INTERFERENCE
6-2
88

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info