683161
84
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Displaying a Time Stamp
A time stamp is inserted when there is a change in the encoding
or decoding status.
Selecting a Time Stamp Type
It is possible to select whether to display only the time stamp or to
display both the time stamp and frequency.
Configure in Menu [2-15] CW/RTTY/PSK Time
Stamp
Setting Value
Off/ Time Stamp/ Time Stamp+Frequency
(default)
Off: Does not display a time stamp.
Time Stamp: Displays only the time stamp.
Time Stamp+Frequency: Displays both the time stamp and
frequency.
Selecting a Clock Type
Configure the clock for displaying the time stamp to a “Local Clock”
or “Secondary Clock”.
Configure in Menu [2-16] Clock (CW/RTTY/PSK
Time Stamp)
Setting Value Local Clock (default)/ Secondary Clock
When encoding or decoding starts, a line break and time
stamp will be inserted before displaying the encoded or
decoded character string.
Editing the Communication Log File
1 In the CW communication screen, press and hold
F2 [LOG]. In the RTTY and PSK communication
screens, press and hold F4 [LOG].
The screen for selecting log file appears.
.
2
Press F2[ ]/ F3[ ] to select a file.
Pressing F4 [VIEW] displays the log information of the
selected file.
.
To read data from the internal memory, press F7 [INT.MEM].
To read data from the USB flash drive, press F7
[USB.MEM]. (If a USB flash drive is not connected, a message
will appear prompting you to get ready the USB flash drive.)
Pressing F5 [NAME] allows the file name to be changed.
Pressing F6 [DELETE] displays a message to confirm
deletion of the file. Pressing F4 [OK] deletes the file.
Operation in FM Mode
Operating in the FM mode enables high-quality voice
communication as well as communication that is noise-resistant.
Communication in the FM mode is also supported on the 29 MHz,
50 MHz and 70 MHz (E type) bands. To communicate with a
distant station for which communication cannot be established
directly, do so via a repeater.
Adjusting Microphone Gain during Operation in FM
Mode
1 Adjust the frequency.
2 Press [FM/AM/FM-N] to select FM mode.
3 Press [MENU].
4 Press F [ADV.] to display the Advanced Menu
screen.
If F [ADV.] is not displayed, press F [MORE] to display F
[ADV.].
5
Select Advanced Menu [10] Microphone Gain (FM
Mode).
6 Press [SEND], or press and hold [PTT] on the
microphone.
This transceiver is placed in the TX mode and a level meter is
displayed.
7 Speak into the microphone in the normal tone and
loudness.
8 Press F4 [–]/ F5 [+] or turn the [MULTI/CH] control
to adjust the microphone gain.
Setting Value 0 to 50 (default) to 100 (1 step)
Adjust the microphone gain level such that the peak value
of the level meter falls within the zone.
9 Press [SEND] or release [PTT] on the microphone.
Doing so places this transceiver in the RX mode.
10
Press F1 [ ].
When using a microphone with a low sensitivity such as
the MC-90, adjust the microphone gain to a higher level.
When a microphone with a low sensitivity is used, the
modulation factor may stabilize by setting the speech
processor to ON.
5 COMMUNICATING AIDS
5-28
84

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info