683161
68
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Encoding Character Strings Using the CW Message
Memory
Fixed phrases can be registered in the CW message memory for
use during transmission.
Use the CW message memory when transmitting a fixed
phrase. Otherwise, the USB keyboard can also be used to input
the character string.
Press F2 [CH 1] to F5 [CH 4] or F2 [CH 5] to F5 [CH
8] in the CW communication screen.
If F2 [CH 1] to F5 [CH 4] or F2 [CH 5] to F5 [CH 8] are not
displayed in the key guide, press F1 [MORE] to toggle the
key guide display.
Press F7 [NEXT] to switch between F2 [CH 1] to F5 [CH
4] and F2 [CH 5] to F5 [CH 8].
The phrase registered in the corresponding message channel
is displayed in the character string buffer and encoding starts
immediately.
.
If a character string already exists in the character string
buffer, encoding starts after the fixed phrase is added to the
end of the character string.
If encoding of a character string is already in progress, the
fixed phrase is added to the end of the character string and
encoding will continue.
A space is inserted before the fixed phrase when it is added
to the end of an existing character string.
Message CH supports only messages registered via text
input. (Even when “Paddle” is selected for registering
messages in the menu, the message CH information
registered via text input using the USB keyboard is displayed
on the CW communication screen.)
If the message displayed in the message list is too long to fit
into the display range, this will be indicated by a “...” display
to the right of the truncated message.
Encoding Operation of Message Channel with Repeat
Function Enabled
Upon pressing the key that corresponds to a message channel
for which the repeat function is enabled, << >> lights up.
After encoding of the character strings in the character string
buffer is complete, the transceiver switches to the “repeat wait”
mode. After the specified time interval has elapsed, the same
character strings of the channel for which the repeat function is
enabled is encoded again, and this process goes on.
<<
>> lights up while in the “repeat wait” mode.
When the specified time interval after entering the “repeat wait”
state has elapsed, <<
>> disappears and encode
operation resumes.
Pressing F4 [STOP] or [ESC] on the USB keyboard stops the
encoding operation or “repeat wait” state and returns the
transceiver to the decoding state.
While <<
>> is illuminated, character strings cannot be
added using the USB keyboard or the F2 [CH 1] to F5 [CH 4]
keys.
While <<
>> is illuminated, characters cannot be deleted
using the backspace key of the USB keyboard or the F2 [
]
key.
Contest Number Behavior
To use a contest number, “%N” needs to be embedded in the
message of the message channel.
The “%N” portion will be substituted with the current contest
number during encoding.
The contest number is counted up after all the contents in the
character string buffer are encoded.
Paddle Operation on CW Communication Screen
Morse code that is input via paddle operation (straight key, bug
key, etc.) can be converted into text and displayed on the screen.
This function can also be used to practice the input of Morse code.
Paddle Operation when the Character String Buffer is
Empty
When break-in is ON, the Morse code input is transmitted and
information that is keyed is displayed in the TX details display
area character by character.
When break-in is OFF, the Morse code input is not transmitted
and information that is keyed is displayed in the character string
buffer character by character.
Encoding does not start even when the quick mode is
set to ON.
Encoding does not start even when characters are
added using the USB keyboard after the character
strings that are added via paddle operation.
To enable encoding of the character strings displayed in
the character string buffer, press F4 [START] or [Enter]
on the USB keyboard.
Paddle Operation during Encoding of Character
Strings in the Character String Buffer
When Interrupt Keying is ON, encoding of character strings is
temporarily stopped and resumes only after keying is complete.
When Interrupt Keying is OFF, encoding of character strings is
stopped.
If the signals input via paddle operation are codes that cannot
be converted into text, the characters are not displayed.
Saving CW Communication Logs
The CW, RTTY and PSK communication screens can be saved
using the communication log function. Please refer to
“Communication Log” on page 5-27.
5 COMMUNICATING AIDS
5-12
68

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info