683161
70
Verklein
Vergroot
Pagina terug
1/196
Pagina verder
Changing the Weighting
The electronic keyer allows the dot-dash weighting to be adjusted
automatically. Weighting is the ratio of the dash length to the dot
length.
2 weighting modes are available for selection: the “auto
weighting” mode changes the ratio automatically in tandem with
the keying speed, while the ratio is fixed in the “manual
weighting” mode and not affected by the keying speed.
When [2.5] (1:2.5) to [4.0] (1:4) is selected, the dot-dash weight
ratio is fixed regardless of the keying speed.
Configure in Menu [5-08] CW Keying Weight Ratio
Setting Value Automatic (default)/ 2.5 to 4.0 (0.1 step)
When this is configured to “Automatic”, the keying speed and
weight ratio settings are as follows.
Adjusting the Keying Speed Weight
4 to 24 1:2.8
25 to 44 1:3.0
45 to 60 1:3.2
Weight Ratio Reverse
When the weighting mode is configured to “Automatic”, increasing
the keying speed increases the weight ratio. Configuring the menu
below to ON decreases the weight ratio when the keying speed
increases.
Configure in Menu [5-09]
CW Keying Reversed
Weight Ratio
Setting Value Off (default)/ On
When weight reverse is enabled in the “Automatic” weighting
mode, the keying speed and weight ratio settings are as
follows.
Adjusting the Keying Speed Weight
4 to 24 1:3.2
25 to 44 1:3.0
45 to 60 1:2.8
CW Message Memory
This transceiver comes with memory channels that can store up
to 8 CW messages. In addition to paddle operation, a message
can be registered by entering a text using the USB keyboard or via
operating this transceiver.
CW message memory channels come in handy for messages
that are repeatedly transmitted as registering the messages in
advance allows them to be used repeatedly such as during
contest.
Switching the Method of Registering CW Messages
A method for registering messages can be selected from the
options below.
Configure in Menu [5-11] CW Message Entry
Setting Value Text String/ Paddle (default)
Text String: Registers messages using text strings.
Paddle: Registers messages via paddle operation.
Registering CW Messages via Text Input
Check to ensure that the CW message registration method in
Menu [5-11] is configured to “Text String”, followed by performing
the steps below to register a CW message. CW messages can be
stored in any of the channels from 1 to 8.
1 Press F2 [KEYER] to display the CW Message
screen (for text input).
.
When this transceiver is in a mode other than CW, F2
[KEYER] is not displayed in the key guide. Press
[CW/CW-R].
If the channel to register the CW message is not
displayed in the key guide, press F1 [MORE]. Doing so
switches the key guide.
2 Press and hold F2 [CH 1] to F5 [CH 4] or F2 [CH 5]
to F5 [CH 8] to select the channel to register the CW
message.
The CW message edit screen is displayed.
Pressing F7 [NEXT] each time switches between F2 [CH
1] to F5 [CH 4] and F2 [CH 5] to F5 [CH 8].
.
5 COMMUNICATING AIDS
5-14
70

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Kenwood TS-890S bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Kenwood TS-890S in de taal/talen: Engels als bijlage per email.

De handleiding is 21,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Kenwood TS-890S

Kenwood TS-890S Gebruiksaanwijzing - Nederlands - 196 pagina's

Kenwood TS-890S Gebruiksaanwijzing - Deutsch - 196 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info