654650
1
Verklein
Vergroot
Pagina terug
1/14
Pagina verder
Part No. 144588 R0399A Printed in USA © 1999 ICON Health & Fitness, Inc.
USER'S MANUAL
Serial Number Decal
Model No. IETL14070
Serial No.
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or find that
there are missing or damaged
parts, we will guarantee com-
plete satisfaction through our
Customer Service Department.
Please CALL:
0345-089009
Or WRITE:
ICON Fitness Lifestyle Ltd.
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
West Yorkshire
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Write the serial number in the space
above for future reference.
ORDERING REPLACEMENT PARTS
If you encounter any difficulties with this product, or if you need to order replacement parts, contact the ICON
Fitness Lifestyle Ltd. office, or write:
ICON Fitness Lifestyle Ltd.
Greenwich House
223 North Street
Sheepscar
Leeds LS7 2AA
West Yorkshire
Tel: Country Code: 0345-089009
Fax: 0113-2411120
To help us assist you, please give the following information when calling or writing:
¥ The MODEL NUMBER of the product (IETL14070).
¥ The NAME of the product (IMAGE 10.6Q treadmill).
¥ The SERIAL NUMBER of the product (see the front cover of this manual).
¥ The KEY NUMBER of the part(s) (see page 22 of this manual).
¥ The DESCRIPTION of the part(s) (see page 22 of this manual).
If possible, place the treadmill near your telephone for easy reference when calling.
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO USE THE HEART RATE MONITOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
Note: An EXPLODED DRAWING is attached at the centre of this manual. Save the EXPLODED DRAWING for
future reference.
2
23
Key No. Qty. Description
106 1 Warning Decal
107 2 Foam Pad
108 1 Small Star Washer
109 1 Receiver
110 1 Pulley/Flywheel/Fan
111 1 Incline Motor
112 1 Console Wire Harness
113 2 12Ó Ground Wire
114 1 Belly Pan Hinge
115 1 Upright/Base
116 1 Upright Cover (left outside)
117 2 Incline Warning Decal
118 20 Foot Rail Screw
119 20 Foot Rail Nut
Key No. Qty. Description
# 1 8Ó Green/Yellow Wire
# 1 14Ó Black Wire, Male/Female
# 1 4Ó Green/Yellow Wire
# 1 4Ó Blue, Male/Female
# 1 10Ó White, 2 Female
# 1 14Ó White Wire, 2 Female
# 1 14Ó Blue Wire, 2 Female
# 1 4Ó Blue Wire, 2 Female
# 1 8Ó Blue Wire, 2 Female
# 2 4Ó Black Wire, 2 Female
# 1 UserÕs Manual
* Includes all parts shown in the box
# These parts are not illustrated
1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
2. Use the treadmill only as described in this
manual.
3. Place the treadmill on a level surface, with
eight feet (2 m) of clearance behind it. Do not
place the treadmill on any surface that blocks
air openings. To protect the floor or carpet
from damage, place a mat under the treadmill.
4. Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
6. Keep children under the age of 12 and pets
away from the treadmill at all times.
7. The treadmill should be used only by persons
weighing 250 pounds (115 kg) or less.
8. Never allow more than one person on the
treadmill at a time.
9. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose cloth-
ing that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women. Always wear athletic
shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.
10. When connecting the power cord (see HOW
TO PLUG IN THE POWER CORD on page 7),
plug the power cord into an earthed circuit.
When replacing the fuse, on ASTA approved
BS1362 type should be fitted to the fuse car-
rier. A 13 amp fuse should be used. No other
appliance should be on the same circuit.
11. If you need an extension cord, use only a 3-
conductor, 14-gauge (1mm
2
) cord that is no
longer than 1,5 meters (5 feet).
12. Keep the power cord away from heated sur-
faces.
13. Never move the walking belt whilst the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See BE-
FORE YOU BEGIN on page 4 if the treadmill is
not working properly.)
WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the
following important precautions and information before operating the treadmill.
IMPORTANT PRECAUTIONS
22
3
PART LISTÑModel No. IETL14070 R0399A
Key No. Qty. Description
1 1 Frame
2 38 Screw
3 4 Isolator/Wheel Nut
4 4 Motor Bushing
5 1 Controller Bracket
6 4 Isolator
7 1 Choke Bracket
8 1 14Ó Controller Wire
9 1 6Ó Wire Harness
10* 1 Motor/Pulley/Flywheel/Fan
11 1 Latch Housing
12 1 Left Foot Rail
13 2 Rear Platform Screw
14 2 Roller Guard
15 1 Walking Platform
16 1 Rear Roller
17 1 Incline Pivot Bolt
18 1 Front Roller/Pulley
19 4 Motor Bolt
20 1 Console Base
21 32 Bracket Screw
22 2 Hood Anchor
23 2 Hood Anchor Bracket
24 4 Motor Bracket Bolt
25 2 Motor Bracket Washer
26 3 Long Hood Bracket
27 2 Belt Guide
28 1 Console Warning Decal
29 1 Outlet Bracket
30 1 Circuit Breaker
31 1 Receptacle
32 2 Grommet
33 1 On/Off Switch
34 1 Incline Leg
35 1 Front Roller Adj. Bolt
36 5 Roller Adj. Washer
37 2 Incline Leg Spacer
38 4 Incline Leg Pivot Nut
39 4 Motor Nut
40 1 Motor Pivot Bolt
41 3 Frame Pivot/Incline Bolt
42 1 Key/Clip
43 2 Flange Nut
44 1 Motor Tension Nut
45 2 Small Nut
46 8 Wheel Washer
47 2 Small Bolt
48 1 Sensor
49 1 Speed Sensor Bracket
50 1 Speed Disk
51 1 20Ó Wire Harness
52 1 4Ó Wire Tie
53 1 Battery Cover
Key No. Qty. Description
54 2 Shock
55 1 Walking Belt
56 8 Belly Pan Spacer
57 1 Choke
58 3 Hood Anchor Screw
59 1 Belly Pan
60 1 Right Foot Rail
61 5 8Ó Cable Tie
62 1 Motor Bracket
63 1 Tie Holder
64 1 Releasable tie
65 2 Rear Roller Adj. Bolt
66 1 Rear Roller Endcap
67 2 Endcap Pad
68 1 Pulse Monitor
69 1 Monitor Strap
70 1 Console
71 5 Side Bracket Screw
72 1 Motor
73 4 Upright Cap
74 4 Console/Hood Side Screw
75 1 Console Plate
76 1 Electronic Bracket Guard
77 1 Hood
78 5 Console Back/Hood Screw
79 20 Foot Rail Washer
80 1 Power Board
81 4 Plastic Stand-Off
82 2 Motor Tension Washer
83 1 Controller
84 1 Upright Wire Harness
85 1 Filter
86 1 Electronics Plate
87 1 Upright Cover (right inside)
88 2 Upright Cover
89 4 Platform Screw (front)
90 2 Wheel Bolt
91 4 Front Wheel
92 1 Motor Belt
93 4 Pivot Nut
94 1 Adhesive Clip
95 1 Allen Wrench
96 2 Upright Cap
97 2 Handrail Foam
98 2 Handrail Endcap
99 1 Lock Knob
100 1 Lock Knob Sleeve
101 1 Lock Knob Spring
102 1 Lock Pin Collar
103 1 Lock Pin
104 1 Pin Clip
105 4 Platform Washer
Note: To identify the parts listed below, refer to the EXPLODED DRAWING attached at the centre of this manual.
14. Never start the treadmill whilst you are stand-
ing on the walking belt. Always hold the
handrails whilst exercising on the treadmill.
15. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
16. The heart rate monitor is not a medical de-
vice. Various factors, including the user's
movement, may affect the accuracy of heart
rate readings. The heart rate monitor is in-
tended only as an exercise aid in determining
heart rate trends in general.
17. Never leave the treadmill unattended whilst it
is running. Always remove the key and move
the on/off switch to the ÒoffÓ position when
the treadmill is not in use. (See the drawing on
page 4 for the location of the on/off switch.)
18. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO MOVE
THE TREADMILL on page 17.) You must be
able to safely lift 45 pounds (20 kg) in order
to raise, lower, or move the treadmill.
19. When folding or moving the treadmill, make
sure that the storage latch is fully closed.
20. Inspect and tighten all parts of the treadmill
every three months.
21. Never insert any object into any opening.
22. The roller guards must be 1/8 inch (3mm)
from the rear roller. Remove the key and ad-
just the roller guards, if necessary.
23. Always unplug the power cord before per-
forming the maintenance and adjustment pro-
cedures described in this manual. Never re-
move the motor hood unless instructed to do
so by an authorised service representative.
Servicing other than the procedures in this
manual should be performed by an authorised
service representative only.
SAVE THESE INSTRUCTIONS
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
The decals shown below have been placed on the treadmill. If a decal is missing, or if it is not legible,
please call our Customer Service Department to order a free replacement decal (see ORDERING RE-
PLACEMENT PARTS on back cover). Apply the decal in the location shown.
IMPORTANT: Incline must be set at
lowest level before
folding treadmill into
storage position.
4
21
Cool-down
Finish each workout with 5 to 10 minutes of stretching
to cool down. This will increase the flexibility of your
muscles and will help to prevent post-exercise problems.
Exercise Frequency
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest be-
tween workouts. After a few months, you may com-
plete up to five workouts each week if desired. The key
to success is to make exercise a regular and enjoyable
part of your everyday life.
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the
right. Move slowly as you stretchÑnever bounce.
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward
from your hips. Allow your back and shoulders to relax as you
reach down toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times. Stretches: Hamstrings, back
of knees and back.
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot to-
ward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back and groin.
3. Calf/Achilles Stretch
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax.
Repeat 3 times for each leg. To cause further stretching of the
achilles tendons, bend your back leg as well. Stretches: Calves,
achilles tendons and ankles.
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and grasp
one foot with your other hand. Bring your heel as close to your
buttocks as possible. Hold for 15 counts, then relax. Repeat 3
times for each leg. Stretches: Quadriceps and hip muscles.
5. Inner Thigh Stretch
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold for
15 counts, then relax. Repeat 3 times. Stretches: Quadriceps
and hip muscles.
1
2
3
4
5
Thank you for selecting the IMAGE
¨
10.6Q treadmill.
The IMAGE
¨
10.6Q treadmill combines advanced tech-
nology with innovative design to let you enjoy an effec-
tive form of cardiovascular exercise in the convenience
and privacy of your home. And when youÕre not exer-
cising, the unique IMAGE
¨
10.6Q can be folded up, re-
quiring less than half the floor space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,
please call our Customer Service Department at 0345-
089009. To help us assist you, please note the product
model number and serial number before calling. The
model number of the treadmill is IETL14070. The serial
number can be found on a decal attached to the tread-
mill (see the front cover of this manual for the location).
Before reading further, please review the drawing
below and familiarise yourself with the parts that are
labelled.
BEFORE YOU BEGIN
Handrail
Lock Knob
Key/Clip
Circuit
Breaker
Walking Belt
Foot Rail
Roller Guard
BACK
RIGHT SIDE
Rear Roller
Adjustment Bolts
Water Bottle
Holder (Bottle
not included)
Reading Rack
Accessory Tray
Console
Upright
On/Off
Switch
520
CONDITIONING GUIDELINES
The following guidelines will help you to plan your ex-
ercise program. RememberÑthese are general guide-
lines. For more detailed information about exercise,
obtain a book or consult your physician.
EXERCISE INTENSITY
Whether your goal is to burn fat or strengthen your car-
diovascular system, the key to achieving the desired
results is to exercise with the proper intensity. The
proper intensity level can be found by using your heart
rate as a guide. For effective exercise, your heart rate
should be maintained at a level between 70% and 85%
of your maximum heart rate as you exercise. This is
known as your training zone.
You can find your training zone in the table below.
Training zones are listed according to age and physical
condition.
Burning Fat
To burn fat, you must exercise at a low intensity level
for a sustained period of time. During the first few
minutes of exercise, your body uses easily accessible
carbohydrate calories for energy. Only after the first few
minutes of exercise does your body begin to use stored
fat calories for energy. If your goal is to burn fat, adjust
the intensity of your exercise until your heart rate is
near the low end of your training zone as you exercise.
Aerobic Exercise
If your goal is to strengthen your cardiovascular sys-
tem, your exercise must be Òaerobic.Ó Aerobic exercise
is activity that requires large amounts of oxygen for
prolonged periods of time. This increases the demand
on the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise,
adjust the intensity of your exercise until your heart
rate is near the middle of your training zone.
WORKOUT GUIDELINES
Each workout should include the following three impor-
tant parts: (1) a warm-up, (2) training zone exercise,
and (3) a cool-down.
Warm-up
Warming up prepares the body for exercise by increas-
ing circulation, delivering more oxygen to the muscles,
and raising the body temperature. Begin each workout
with 5 to 10 minutes of stretching and light exercise to
warm up (see SUGGESTED STRETCHES on page 21).
Training Zone Exercise
After warming up, increase the intensity of your exer-
cise until your heart rate is in your training zone for 20
to 60 minutes. (During the first few weeks of your exer-
cise program, do not keep your heart rate in your train-
ing zone for longer than 20 minutes.) Breathe regularly
and deeply as you exerciseÑnever hold your breath.
WARNING: Before beginning
this or any exercise program, consult your
physician. This is especially important for in-
dividuals over the age of 35 or individuals
with pre-existing health problems.
WARNING: The heart rate moni-
tor is not a medical device. Various factors, in-
cluding your movement, may affect the accu-
racy of heart rate readings. The heart rate
monitor is intended only as an exercise aid in
determining heart rate trends in general.
20 138-167 133-162
25 136-166 132-160
30 135-164 130-158
35 134-162 129-156
40 132-161 127-155
45 131-159 125-153
50 129-156 124-150
55 127-155 122-149
60 126-153 121-147
65 125-151 119-145
70 123-150 118-144
75 122-147 117-142
80 120-146 115-140
85 118-144 114-139
Age
Unconditioned Conditioned
Training Zone (Beats/Min.)
ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. No tools are required for assembly.
1. With the help of a second person, carefully raise the
Uprights (115) until the treadmill is in the position shown.
2. Press the Lock Knob Sleeve (100) into the left Upright
(115).
Remove the Lock Knob (99) from the Lock Pin (103).
Make sure that the Lock Pin Collar (102) and the Spring
(101) are on the Lock Pin. Insert the Lock Pin into the left
Upright (115) and tighten the Lock Knob onto the Lock
Pin.
3. Remove the backing from the Adhesive Clip (94). Press
the Adhesive Clip onto the base of the Uprights (115) in
the indicated location. Press the Allen Wrench (95) into
the Adhesive Clip.
4. Make sure that all parts are tightened before you use the treadmill. Place a mat under the treadmill to
protect the floor or carpet.
115
1
103
101
102
99
100
115
2
95
115
94
3
6
19
b. If the walking belt has shifted to the right, first remove the key
and UNPLUG THE POWER CORD. Using the allen wrench, turn
the left rear roller adjustment bolt counterclockwise, and the right
bolt clockwise, 1/4 of a turn each. Be careful not to overtighten
the walking belt. Plug in the power cord, insert the key and run
the treadmill for a few minutes. Repeat until the walking belt is
centred.
c. If the walking belt slips when walked on, first remove the key
and UNPLUG THE POWER CORD. Using the allen wrench,
turn both rear roller adjustment bolts clockwise, 1/4 of a turn.
When the walking belt is correctly tightened, you should be able
to lift each side of the walking belt 2Ó to 3Ó (5 to 7 cm) off the
walking platform. The centre of the walking belt should just touch
the walking platform. Be careful to keep the walking belt centred.
Plug in the power cord, insert the key and run the treadmill for a
few minutes. Repeat until the walking belt is properly tightened.
5. SYMPTOM: THE HEART RATE MONITOR DOES NOT FUNCTION PROPERLY
a. If the heart rate monitor does not function properly, refer to HEART RATE MONITOR TROUBLE-
SHOOTING on page 6.
b. If the heart rate monitor still does not function properly, the CR 2032 battery
should be changed. To replace the battery, locate the battery cover on the back
of the sensor unit. Insert a coin into the slot in the cover and turn the cover coun-
terclockwise to the ÒopenÓ position. Remove the cover.
Remove the old battery and insert a new CR 2032 battery, making sure that the
battery is turned so the writing is on top. In addition, make sure that the rubber
gasket is in place in the sensor unit. Replace the battery cover and turn it to the
closed position.
6. SYMPTOM: AN ERROR CODE (E1, E20, E21, E22, E23, OR E24) APPEARS ON THE CONSOLE
a. If an error code appears, remove the key from the console, wait for a moment, and then reinsert it. If the
error code appears again, call our Customer Service Department. Do not use the treadmill until the problem
is corrected.
b
c
HOW TO PUT ON THE HEART RATE MONITOR
The heart rate monitor consists of two components:
the chest strap and the sensor unit (see the drawing
below). Insert the tab on one end of the chest strap
through one of the holes in the sensor unit. Press the
end of the sensor unit under the buckle on the chest
strap. The tab should be almost flush with the front of
the sensor unit.
Next, wrap the
heart rate moni-
tor around your
chest and
attach the other
end of the chest
strap to the sen-
sor unit. Adjust
the length of the
chest strap, if
necessary. The
heart rate moni-
tor should be under your clothing, tight against your
skin, and as high under the pectoral muscles or
breasts as is comfortable. Make sure that the logo on
the sensor unit is facing forward and is right-side-up.
Pull the sensor unit away from your body a few inches
and locate the two electrode areas on the inner side.
The electrode areas are the areas covered by shallow
ridges. Using saline solution such as saliva or contact
lens solution, wet both electrode areas. Return the
sensor unit to a position against your chest.
HEART RATE MONITOR CARE AND MAINTENANCE
¥ Thoroughly dry the heart rate monitor after each
use. The heart rate monitor is activated when the
electrode areas are wetted and the heart rate
monitor is put on; the heart rate monitor shuts off
when it is removed and the electrode areas are
dried. If the heart rate monitor is not dried after each
use, it may remain activated longer than necessary,
draining the battery prematurely.
¥ Store the heart rate monitor in a warm, dry place.
Do not store the heart rate monitor in a plastic bag
or other container that may trap moisture.
¥ Do not expose the heart rate monitor to direct
sunlight for extended periods of time; do not expose
it to temperatures above 122¡ Fahrenheit (50¡
Celsius) or below 14¡ Fahrenheit (-10¡ Celsius).
¥ Do not excessively bend or stretch the sensor unit
when using or storing the heart rate monitor.
¥ Clean the sensor unit using a damp clothÑnever
use alcohol, abrasives, or chemicals. The chest
strap may be hand washed and air dried.
HEART RATE MONITOR TROUBLE-SHOOTING
The instructions on the following pages explain
how the heart rate monitor is used with the console.
If the letters ÒPLSÓ appear in the PULSE/CALORIES
display or if the displayed heart rate is excessively
high or low, try the steps below.
¥ Make sure that the heart rate monitor is under your
clothing, tight against your skin, and as high under
the pectoral muscles or breasts as is comfortable.
The logo on the sensor unit must be facing forward
and be right-side-up. Note: If the heart rate monitor
does not function when positioned as described, try
moving it slightly lower or higher on your chest.
¥ Use saline solution such as saliva or contact lens
solution to wet the two electrode areas on the
sensor unit. If heart rate readings do not appear until
you begin perspiring, re-wet the electrode areas.
¥ As you walk or run on the treadmill, position your-
self near the centre of the walking belt. For the
console to display heart rate readings, the user
must be within armÕs length of the console.
¥ The heart rate monitor is designed to work with
people who have normal heart rhythms. Heart rate
reading problems may be caused by medical
conditions such as premature ventricular contrac-
tions (pvcs), tachycardia bursts, and arrhythmia.
¥ The operation of the heart rate monitor can be
affected by magnetic interference caused by high
power lines or other sources. If it is suspected that
this is a problem, try relocating the treadmill.
¥ The CR2032 battery may need to be replaced.
HOW TO USE THE HEART RATE MONITOR
Chest Strap
Tabs
Sensor Unit
Tab
Buckle
Battery
Rubber
Gasket
718
MAINTENANCE AND TROUBLE-SHOOTING
Most treadmill problems can be solved by following the simple steps below. Find the symptom that ap-
plies to your treadmill and follow the steps listed. If further assistance is needed, please call our
Customer Service Department at 0345-089009.
1. SYMPTOM: THE POWER DOES NOT TURN ON
a. Make sure that the power cord is plugged into a properly earthed outlet. (See HOW TO PLUG IN THE
POWER CORD on page 7.)
b. After the power cord has been plugged in, make sure that the key is fully inserted into the console. (See step
3 on page 9.)
c. Check the circuit breaker located on the treadmill near the
power cord. If the switch protrudes as shown, the circuit
breaker has tripped. To reset the circuit breaker, wait for five
minutes and then press the switch back in.
d. Check the on/off switch located at the front of the treadmill
near the power cord. The switch must be in the ÒonÓ position.
2. SYMPTOM: THE POWER TURNS OFF DURING USE
a. Check the circuit breaker located on the treadmill frame near the power cord (see 1. c. above). If the circuit
breaker has tripped, wait for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in.
c. Remove the key from the console. Reinsert the key fully into the console. (See step 3 on page 9.)
d. Make sure that the on/off switch is in the ÒonÓ position. (See 1. d. above.)
e. If the treadmill still will not run, please call our Customer Service Department.
3. SYMPTOM: THE WALKING BELT SLOWS WHEN WALKED ON
a. If you need an extension cord, use only a 3-conductor, 14-gauge (1mm
2
) cord that is no longer
than 1,5 meters (5 feet).
b. If the walking belt still slows when walked on, please call our Customer Service Department.
4. SYMPTOM: SYMPTOM: THE WALKING BELT IS OFF-CENTRE OR SLIPS WHEN WALKED ON
a. If the walking belt has shifted to the left, first remove the key and
UNPLUG THE POWER CORD. Using the allen wrench, turn the
left rear roller adjustment bolt clockwise, and the right bolt coun-
terclockwise, 1/4 of a turn each. Be careful not to overtighten the
walking belt. Plug in the power cord, insert the key and run the
treadmill for a few minutes. Repeat until the walking belt is cen-
tred.
a
Tripped
Reset
Tripped
c
Reset
OFF
ON
ÒOnÓ
Position
d
OPERATION AND ADJUSTMENT
THE PERFORMANT LUBE
TM
WALKING BELT
Your treadmill features a walking belt coated with
PERFORMANT LUBE
TM
, a high-performance lubricant.
IMPORTANT: Never apply silicone spray or other sub-
stances to the walking belt or the walking platform. They
will deteriorate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunction or
break down, earthing provides a path of least resistance for
electric current to reduce the risk of electric shock. This prod-
uct is equipped with a cord having an equipment-earthing con-
ductor and a earthing plug. Plug the power cord into a
surge protector, and plug the surge protector into an ap-
propriate outlet that is properly installed and earthed in
accordance with all local codes and ordinances.
DANGER: Improper connection of the
equipment-earthing conductor can result in an in-
creased risk of electric shock. Check with a quali-
fied electrician or serviceman if you are in doubt as
to whether the product is properly earthed. Do not
modify the plug provided with the productÑif it will
not fit the outlet, have a proper outlet installed by a
qualified electrician.
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, unplug the power cord. Caution:
You must be able to safely lift 45 pounds (20 kg) in order
to raise, lower, or move the treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. To decrease the possibility of injury, bend
your legs and keep your back straight. As you raise
the treadmill, make sure to lift with your legs rather
than your back. Raise the treadmill about halfway to the
vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Hold the lock knob with your left hand
and pull it to the side. Raise the treadmill until the lock
knob is aligned with the catch. Slowly release the knob.
Make sure that the pin on the lock knob is inside of
the catch.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of
direct sunlight. Do not leave the treadmill in the stor-
age position in temperatures above 85¡ Fahrenheit.
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the stor-
age position as described above. Make sure that the pin
on the lock knob is inside of the catch.
1. Hold the handrails and place one foot on the base as
shown.
2. Tilt the treadmill back until it rolls freely on the front
wheels. Carefully move the treadmill to the desired loca-
tion. Never move the treadmill without tipping it back.
To reduce the risk of injury, use extreme caution
while moving the treadmill. Do not move the treadmill
over an uneven surface.
3. Place one foot on the base and carefully lower the tread-
mill until it is resting on the base.
HOW TO LOWER THE TREADMILL FOR USE
1. Refer to drawing 2 above. Hold the upper end of the treadmill with your right hand as shown. Hold the lock
knob with your left hand and pull it to the side. Pivot the treadmill down a few inches.
2. Refer to drawing 1 above. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To
decrease the possibility of injury, bend your legs and keep your back straight.
8
17
FEATURES OF THE CONSOLE
The treadmill console offers an impressive array of
features designed to make your workouts more effective.
When the console is in the manual mode, the speed and
incline of the treadmill can be changed with a touch of a
button. As you exercise, the console will display instant
exercise feedbackÑyou can watch your progress on the
LED Òtrack,Ó while the four displays show your heart rate,
the number of calories burned, the incline, workout time,
speed, pace, distance, and laps completed.
Eight preset programs are also offered: three incline pro-
grams automatically control the incline of the treadmill as
they guide you through effective workouts; three speed
programs automatically control the speed of the treadmill;
and two pulse driven programs automatically control the
speed and the incline of the treadmill to keep your heart
rate within a predetermined range during your workouts.
The console also features two custom programs that
allow you to create your own workout programs and store
them in the consoleÕs memory for future use.
To use the manual mode, follow the steps beginning on
page 10. To use an incline program or a speed pro-
gram, see page 12. To use a pulse driven program, see
page 13. To create a custom program, see page 14. To
use a custom program, see page 15.
Note: The console can display speed and distance in
either miles or kilometres (see SPEED/PACE DISPLAY
on page 11). For simplicity, all instructions in this section
refer to miles.
CAUTION: To reduce the risk of
serious injury, read the following precautions
before operating the console.
¥ Do not stand on the walking belt when
turning on the power or starting the
walking belt.
¥ Always wear the clip (see part ÒOÓ in the
drawing above) whilst operating the tread-
mill. If the key is pulled from the console,
the walking belt will stop.
¥ The treadmill is capable of high speeds.
Adjust the speed in small increments.
¥ The heart rate monitor is not a medical de-
vice. Various factors may affect the accu-
racy of heart rate readings. The heart rate
monitor is intended only as an exercise aid
in determining heart rate trends in general.
¥ If you have heart problems, or if you are
over 60 years of age and have been inac-
tive, do not use the two pulse driven pro-
grams. If you are taking medication regu-
larly, consult your physician to find
whether the medication will affect your
exercise heart rate.
¥ To reduce the risk of electric shock, keep
the console dry, avoid spilling liquids on
the console, and use only a sealed water
bottle.
Lock
Knob
Catch
Pin
Base
Front Wheels
1
2
DIAGRAM OF THE CONSOLE
IH J K O
BA C D E F G
L M P QN
Note: If there is a thin sheet of clear plastic on
the face of the console, remove it.
916
DIAGRAM OF THE CONSOLE
Refer to the drawing on the opposite page.
A. Workout profilesÑThese profiles show how the
incline of the treadmill will change during incline pro-
grams, how the speed will change during speed pro-
grams, and how your heart rate will change
during pulse driven programs.
B. Mode indicatorsÑThese indicators show whether
the manual mode is selected or whether one of the
eight preset programs is selected.
C. PULSE/CALORIES displayÑThis display shows both
your heart rate (if the heart rate monitor is worn) and
the approximate number of calories you have
burned. The display will alternate between one num-
ber and the other every seven seconds. This display
is also used to enter your weight into the console.
D. INCLINE/TIME displayÑThis display shows both the
incline of the treadmill and the elapsed time. (If a
preset program or a custom program is selected, the
display will show the time remaining in the program.)
The display will alternate between one number and
the other every seven seconds. This display is also
used to enter your age into the console.
E. LED matrixÑWhen the manual mode is selected, this
matrix shows your progress on an LED track. When a
preset program or a custom program is selected, the
matrix shows the programÕs workout profile.
F. SPEED/PACE displayÑThis display shows both the
speed of the walking belt and your current pace
(minutes per mile). The display will alternate between
one number and the other every seven seconds.
G. DISTANCE/LAP displayÑThis display shows both
the distance you have walked and the number of
laps you have completed (one lap equals 1/4 mile).
The display will alternate between one number and
the other every seven seconds.
H. CUSTOM PROGRAM buttonsÑThese buttons are
used to select custom programs 1 and 2.
I. RECORD buttonÑThis button is used to create
custom programs.
J. PROGRAM SELECT buttonÑThis button is used to
select the manual mode and the eight preset pro-
grams. Note: If the walking belt is moving when the
SELECT PROGRAM button is pressed, the walking
belt will slow to a stop and the displays will be reset.
In addition, the treadmill may automatically adjust to
the lowest incline level.
K. SET WEIGHT buttonsÑThese buttons are used to
enter your weight into the console.
L. SET AGE buttonsÑThese buttons are used to enter
your age into the console.
M. INCLINE buttonsÑThese buttons are used to
change the incline of the treadmill. The incline range
is 0% to 12%. Note: The incline can be adjusted
only while the walking belt is moving.
N. START buttonÑThis button is used to start the
walking belt when the manual mode, a preset
program, or a custom program is selected.
O. Key with clipÑThe key turns the console on and off.
The clip is worn on the waistband of your clothes.
P. SPEED buttonsÑThese buttons control the speed
of the walking belt. The speed range is 0.5 mph to
12 mph. Note: When the START button is pressed,
the walking belt will begin to move at 1.0 mph.
Q. STOP buttonÑThis button is used to pause or stop
the walking belt when the manual mode, a preset
program, or a custom program is selected.
HOW TO TURN ON THE POWER
Plug in the power cord (see page 7). All displays
and indicators on the console will flash once and
then darken. Note: If the key is in the console when
the power cord is plugged in, the letters ÒPOÓ will
flash in the SPEED/PACE display. If this occurs,
remove the key.
Make sure that the
on/off switch
located on the
front of the tread-
mill is in the ÒonÓ
position.
Stand on the foot
rails of the tread-
mill and insert the
key into the con-
sole. After a mo-
ment, the MAN-
UAL indicator will
light, a weight set-
ting will appear in the PULSE/CALORIES display,
an age setting will appear in the INCLINE/TIME
display, and the LED track in the centre of the con-
sole will light. Every few seconds, the words
ÒPRESS STARTÓ will scroll across the LED matrix.
OFF
ON
1
2
3
When the first one-minute segment of the program
is completed, all columns of the LED matrix will
move one position to the left, the speed setting of
the second segment will be shown in the flashing
column, and the speed of the treadmill will change
accordingly. The incline will also change according
to the settings that you programmed previously.
The program will continue in this way until the speed
setting of the last segment is shown in the flashing
column and no time remains in the TIME display.
The walking belt will then slow to a stop.
Note: If the program is too easy or too difficult, the
speed or incline setting of the current segment can
be adjusted with the SPEED or INCLINE buttons.
Adjustments will not be stored in memory. To repro-
gram the speed or incline setting of the current seg-
ment, press the RECORD button. The indicator on
the button will light. Speed and incline settings
can be programmed only when the indicator on
the button is lit. Adjust the speed or incline setting
of the current segment with the SPEED or INCLINE
buttons. After the segment is completed, press the
RECORD button again. The new setting will then be
stored in memory.
To stop the program momentarily, press the STOP
button once. All displays will pause and the IN-
CLINE/ TIME display will begin to flash. To restart
the program, press the START button. To end the
program before it is completed, hold down the
STOP button for two seconds. The console will then
be in the same state as if the key had just been in-
serted.
Follow your progress with the LED displays.
Refer to step 7 on page 11.
Remove the key from the console.
When the program has ended, remove the key from
the console. All displays and indicators on the con-
sole will darken.
HOW TO SELECT THE INFORMATION MODE
The console features an information mode that keeps
track of the total time and distance accumulated on the
treadmill.
To access the information mode, hold down the STOP
button while inserting the key into the console. The
INCLINE/TIME display will show the total number of
hours accumulated on the treadmill. The DISTANCE/
LAP display will show the number of miles accumulated
(if the total number of miles exceeds 999, the thou-
sands and ten thousands digits will be shown in the
right half of the SPEED/PACE display). The left half of
the SPEED/PACE display will show which unit of mea-
surement is currently selected: an ÒEÓ for ÒEnglishÓ
(miles) or an ÒMÓ for ÒMetricÓ (kilometres). To change
the unit of measurement, press the SPEED Ò+Ó button.
To exit the information mode, remove the key from the
console.
5
6
1510
Insert the key into the console.
See HOW TO TURN ON THE POWER on page 9.
Note: When you are familiar with the operation of
the console, you may go directly to step 5 if desired.
The first time you use the console, please read and
follow all steps.
Select the MANUAL mode.
When the key
is inserted, the
manual mode
will automati-
cally be se-
lected and the
MANUAL indi-
cator will light.
If a program
has been selected, press the PROGRAM SELECT
button repeatedly to select the manual mode again.
Enter your weight and age if desired.
Although it is not necessary to enter your weight and
age to use the manual mode, the CALORIES display
will be more accurate if these numbers are entered.
The current weight set-
ting will appear in the
PULSE/CALORIES
display. Press the SET
WEIGHT buttons to
enter your weight. Each
time one of the buttons
is pressed, the weight setting will change by 1
pound. If one of the buttons is held down, the weight
setting will change in increments of 5 pounds.
The current age setting
will appear in the IN-
CLINE/TIME display.
To enter your age,
press the SET AGE
buttons. Each time one
of the buttons is
pressed, the age setting will change by 1 year. If
one of the buttons is held down, the age setting will
change in increments of 5 years. Note: Once you
have entered your weight and age, the numbers will
be saved in the consoleÕs memory, even if the
power cord is unplugged.
Put on the heart rate monitor if desired.
For the PULSE/CALORIES display to show your
heart rate, the heart rate monitor must be worn. To
put on the heart rate monitor, see HOW TO USE
THE HEART RATE MONITOR on page 6.
Press the START button.
Press the START button to start the walking belt.
The LED track in the centre of the console will
disappear in a counterclockwise direction. One
flashing indicator will then re-appear and the
walking belt will begin to move at 1.0 mph. Hold the
handrails and step onto the walking belt.
The LED track
represents 1/4
of a mile. As
you exercise,
the indicators
will light one
at a time until
the entire
track is lit.
The track will then disappear in a counterclockwise
direction and a new lap will begin.
To stop the walking belt momentarily, press the
STOP button once. All displays will pause and the
INCLINE/TIME display will begin to flash. To restart
the walking belt, press the START button as de-
scribed above. To stop the walking belt and reset all
displays, hold down the STOP button for two sec-
onds. The console will then be in the same state as
if the key had just been inserted.
Adjust the incline and speed of the treadmill.
While the walking belt is moving, the incline of the
treadmill can be adjusted with the INCLINE
buttons. Each time one of the buttons is pressed,
the incline will change by 0.5%. The buttons can
be held down to change the incline quickly. The
incline range is 0% to 12%. Note: After the buttons
are pressed, it may take a moment for the treadmill to
reach the selected incline setting.
To adjust the speed of the walking belt, press the
SPEED buttons. Each time one of the buttons is
pressed, the speed will change by 0.1 mph. The but-
tons can be held down to change the speed in incre-
ments of 0.5 mph. The speed range of the walking
belt is 0.5 mph to 12.0 mph.
HOW TO USE THE MANUAL MODE
1
2
3
4
5
6
Press the RECORD button and program the de-
sired speed and incline settings.
When the RECORD button is pressed, the indicator
on the button will light. Speed and incline settings
can be programmed only when the indicator on
the button is lit.
Refer to the
LED matrix.
Each custom
program is
divided into
one-minute
segments. One
speed setting
and one incline
setting can be programmed for each one-minute
segment. The speed setting of the first segment is
shown in the flashing column of the LED matrix.
(The incline settings are not shown in the LED ma-
trix.) To program the desired speed and incline set-
tings for the first segment, simply adjust the speed
and incline of the treadmill to the desired levels with
the SPEED and INCLINE buttons. Every few times
the SPEED Ò+Ó or ÒÐÓ button is pressed, an additional
LED will light or darken in the flashing column.
When the first one-minute segment of the program
is completed, the current speed setting and the cur-
rent incline setting will be stored in memory. All
columns in the LED matrix will then move one posi-
tion to the left, and the speed setting of the second
segment will be shown in the flashing column.
Program speed and incline settings for the second
segment as described above.
Repeat this procedure until you have programmed
speed and incline settings for as many segments as
desired. Custom programs can have from one to
forty segments. When you are finished, hold down
the STOP button for two seconds. The speed and in-
cline settings you programmed and the number of
segments will then be stored in memory. To use the
program again, see HOW TO USE A CUSTOM PRO-
GRAM at the right.
Note: To pause the program temporarily while you
are programming speed and incline settings, press
the STOP button once. All displays will pause and the
TIME display will begin to flash. To restart the pro-
gram, press the START button.
Remove the key from the console.
When the program has ended, remove the key from
the console. All displays and indicators on the con-
sole will darken.
Insert the key into the console.
See HOW TO TURN ON THE POWER on page 9.
Select one of the custom programs.
To select one of the
custom programs,
press the CUSTOM
PROGRAM 1 or
CUSTOM PROGRAM
2 button. The letters
ÒCP 1Ó or ÒCP 2Ó will
appear in the SPEED/
PACE display to show which program is selected.
When a custom program is selected, the LED matrix
will show the speed settings of the program. If the
program is more than twenty minutes long, only the
first nineteen settings will be shown. The first column
will be flashing. Note: Every few seconds, the words
ÒPRESS STARTÓ will scroll across the LED matrix.
Enter your weight and age if desired.
It is not necessary to enter your weight and age to use
a custom program; however, the CALORIES display
will be more accurate if these numbers are entered.
To enter you weight and age, refer to step 3 on
page 10. If you have already entered your weight
and age, or if you do not want to enter this informa-
tion, go to step 4.
Press the START button.
Press the START button to start the program. After a
moment, the walking belt will begin to move. Hold
the handrails and begin walking.
Refer to the
LED matrix.
Each custom
program is di-
vided into one-
minute seg-
ments. One
speed setting
and one in-
cline setting are programmed for each segment. The
speed setting of the first segment is shown in the
flashing column of the LED matrix. The speed set-
tings of the next six segments are shown in the six
columns to the right. (The incline settings are not
shown in the program display.)
5
1
2
3
4
6
HOW TO USE A CUSTOM PROGRAM
1114
Follow your progress with the four displays.
PULSE/CALORIES dis-
playÑThis display
shows both your heart
rate (if the heart rate
monitor is worn) and the
approximate number of
calories you have
burned. The display will alternate between one num-
ber and the other every seven seconds.
Note: The heart rate monitor will sample your heart
rate every few seconds; it may take up to ten sec-
onds before an accurate heart rate is shown. If your
heart rate is not shown, see HEART RATE
MONITOR TROUBLE-SHOOTING on page 6.
INCLINE/TIME
displayÑThis display
shows both the incline of
the treadmill and the
elapsed time. (If a preset
program or a custom
program is selected, the
display will show the time remaining in the program.)
The display will alternate between one number and
the other every seven seconds.
Note: Each time the INCLINE buttons are pressed,
the display will show the incline setting.
SPEED/PACE
displayÑThis display
shows both the speed of
the walking belt and
your current pace
(minutes per mile). The
display will alternate be-
tween one number and the other every seven
seconds.
Note: Each time the SPEED buttons are pressed,
the display will show the speed setting.
Note: The speed can be
displayed in either miles
per hour (mph) or kilo-
metres per hour (kph).
To check the unit of
measurement, first hold
down the STOP button
while inserting the key
into the console. The SPEED/PACE display will
show an ÒEÓ for ÒEnglishÓ (miles) or an ÒMÓ for
ÒMetricÓ (kilometres). Press the SPEED Ò+Ó button to
change the unit of measurement. Remove and then
reinsert the key.
DISTANCE/LAP dis-
playÑThis display
shows both the dis-
tance you have walked
and the number of laps
you have completed
(one lap equals 1/4
mile). The display will alternate between one number
and the other every seven seconds.
Note: If the speed is displayed in miles per hour, the
distance will be displayed in miles; if the speed is
displayed in kilometres per hour, the distance will be
displayed in kilometres.
When you are finished exercising, stop the
walking belt and remove the key.
Step onto the foot rails, press the STOP button, and
remove the key from the console. Store the key in a
secure place. In addition, press the on/off switch to
the ÒoffÓ position. (See the drawing near the bottom
of page 9.)
7
8
Put on the heart rate monitor.
The heart rate monitor must be worn when a pulse
driven program is used. See HOW TO USE THE
HEART RATE MONITOR on page 6. Note: A pulse
driven program can be started without a heart rate
reading; however, the speed and/or incline of the
treadmill will automatically decrease if your heart rate
is not detected during the program.
Press the START button.
Press the START button to start the program. After a
moment, the walking belt will begin to move. Hold
the handrails and begin walking.
While the first column of the LED matrix is flashing,
the walking belt will move at 1.5 mph. After 90 sec-
onds, the second column of the LED matrix will
begin to flash. As the program progresses, the
speed and/or incline of the treadmill will change at
any time to keep your heart rate near the heart rate
setting shown in the flashing column. When the
twentieth column begins to flash, the walking belt will
move at 1.5 mph until no time remains in the TIME
display. The walking belt will then slow to a stop and
the program will be completed.
If your heart rate is not detected during the program,
the letters ÒPLSÓ will flash in the PULSE/CALORIES
display and the speed and/or incline of the treadmill
will automatically decrease. See HEART RATE
MONITOR TROUBLE-SHOOTING on page 6.
While the program is in progress, minor adjustments
can be made to the speed or incline of the treadmill
with the SPEED or INCLINE buttons. However, if
you increase the speed, the incline will automatically
decrease; if you decrease the speed, the incline will
increase. If you increase the incline, the speed will
decrease; if you decrease the incline, the speed will
increase. The console will always attempt to keep
your heart rate near the heart rate setting shown in
the flashing column. Note: When the incline reaches
the lowest setting, the speed cannot be increased
any further. When the incline reaches the highest
setting, the speed cannot be decreased any further.
Follow your progress with the LED displays.
Refer to step 7 on page 11.
Remove the key from the console.
When the program has ended, remove the key from
the console. All displays and indicators on the con-
sole will darken.
Insert the key into the console.
See HOW TO TURN ON THE POWER on page 9.
Select one of the custom programs.
To select one of the
custom programs,
press the CUSTOM
PROGRAM 1 or
CUSTOM PROGRAM
2 button. The letters
ÒCP 1Ó or ÒCP 2Ó will
appear in the SPEED/PACE display to show which
program you have selected.
Custom programs are workout programs that you
create. The programs are stored in the consoleÕs
memory, and can be changed as many times as
desired. Custom programs control both the speed
and the incline of the treadmill. When one of the
custom programs is selected, the LED matrix will
show the speed settings of the program (until you
have created a program, all speed settings will be
the same). The first column will be flashing. Note:
Every few seconds, the words ÒPRESS STARTÓ will
scroll across the LED matrix.
Enter your weight and age if desired.
It is not necessary to enter your weight and age to
create a custom program; however, the CALORIES
display will be more accurate if these numbers are
entered.
To enter you weight and age, refer to step 3 on
page 10. If you have already entered your weight
and age, or if you do not want to enter this informa-
tion, go to step 4.
Press the START button.
Press the START button to start the program. After a
moment, the walking belt will begin to move. Hold
the handrails and begin walking.
4
1
2
3
4
5
6
7
HOW TO CREATE A CUSTOM PROGRAM
1312
Insert the key into the console.
See HOW TO TURN ON THE POWER on page 9.
Select one of the incline or speed programs.
When the key
is inserted, the
manual mode
will automati-
cally be se-
lected and the
MANUAL indi-
cator will light.
To select one
of the incline or speed programs, press the PRO-
GRAM SELECT button repeatedly until the desired
INCLINE or SPEED indicator lights. Note: The first
incline program and the first speed program are
twenty-minute programs. All other preset programs
are thirty-minute programs.
When an in-
cline or speed
program is se-
lected, the
LED matrix will
show all of the
incline or
speed settings
of the program.
Each incline program has twenty incline settings,
and each speed program has twenty speed set-
tings. One setting is shown in each vertical column
of the LED matrix. The first column will be flashing.
Note: Every few seconds, the words ÒPRESS
STARTÓ will scroll across the LED matrix.
Enter your weight and age if desired.
Although it is not necessary to enter your weight
and age to use an incline program or a speed pro-
gram, the CALORIES display will be more accurate
if these numbers are entered.
To enter you weight and age, refer to step 3 on
page 10. If you have already entered your weight
and age, or if you do not want to enter this informa-
tion, go to step 4.
Put on the heart rate monitor if desired.
For the PULSE/CALORIES display to show your
heart rate, the heart rate monitor must be worn. To
put on the heart rate monitor, see HOW TO USE
THE HEART RATE MONITOR on page 6.
Press the START button.
Press the START button to start the program. After
a moment, the walking belt will begin to move. Hold
the handrails and begin walking.
If an incline program is selected: When the
START button is pressed, the walking belt will begin
to move at 1.0 mph and the incline will adjust to the
incline setting shown in the first column of the LED
matrix. After one minute (or 90 seconds if a thirty-
minute program is selected), the second column of
the LED matrix will begin to flash and the incline will
adjust to the incline setting shown in the second col-
umn. After another minute (or 90 seconds), the third
column will begin to flash and the incline will adjust
to the setting shown in the third column. The pro-
gram will continue in this way until the twentieth col-
umn is flashing and no time remains in the TIME dis-
play. The walking belt will then slow to a stop.
The speed of the walking belt can be adjusted during
the incline program with the SPEED buttons. To stop
the program momentarily, press the STOP button
once. All displays will pause and the INCLINE/TIME
display will begin to flash. To restart the program,
press the START button. To end the program be-
fore it is completed, hold down the STOP button for
two seconds. The console will then be in the same
state as if the key had just been inserted.
While the incline program is in progress, the diffi-
culty level of the program can be adjusted, if de-
sired, with the INCLINE buttons. Press the INCLINE
Ò+Ó button once. The letters ÒMAXÓ will appear in the
LED matrix, and the INCLINE/TIME display will
show the maximum incline that the treadmill will
reach during the program. This information will be
displayed for three seconds. Press the INCLINE Ò+Ó
button again. Each time the button is pressed, the
maximum incline setting and all other settings of the
program will increase slightly. The INCLINE ÒÐÓ but-
ton can be used in the same way to decrease the
difficulty level of the program. Note: The profile
shown in the LED matrix will not change; the profile
shows relative incline settings.
HOW TO USE THE INCLINE PROGRAMS AND THE
SPEED PROGRAMS
1
2
3
4
5
If a speed program is selected: When the START
button is pressed, the walking belt will begin to move
at 1.0 mph, the speed setting shown in the first col-
umn of the LED matrix. After one minute (or 90 sec-
onds if a thirty-minute program is selected), the sec-
ond column of the LED matrix will begin to flash and
the speed will adjust to the speed setting shown in
the second column. After another minute (or 90 sec-
onds), the third column will begin to flash and the
speed will adjust to the setting shown in the third col-
umn. The program will continue in this way until the
twentieth column is flashing and no time remains in
the TIME display. The walking belt will then slow to a
stop.
The incline of the treadmill can be adjusted during
the speed program with the INCLINE buttons. To
stop the program momentarily, press the STOP but-
ton once. All displays will pause and the INCLINE/
TIME display will begin to flash. To restart the pro-
gram, press the START button. To end the program
before it is completed, hold down the STOP button
for two seconds. The console will then be in the
same state as if the key had just been inserted.
While the speed program is in progress, the difficulty
level of the program can be adjusted, if desired, with
the SPEED buttons. Press the SPEED Ò+Ó button
once. The letters ÒMAXÓ will appear in the LED ma-
trix, and the SPEED/PACE display will show the
maximum speed that the treadmill will reach during
the program. This information will be displayed for
three seconds. Press the SPEED Ò+Ó button again.
Each time the button is pressed, the maximum
speed setting and all other settings of the program
will increase slightly. The SPEED ÒÐÓ button can be
used in the same way to decrease the difficulty level
of the program. Note: The profile shown in the LED
matrix will not change; the profile shows relative
speed settings.
Follow your progress with the LED displays.
Refer to step 7 on page 11.
Remove the key from the console.
When the program has ended, remove the key from
the console. All displays and indicators on the con-
sole will darken.
Insert the key into the console.
See HOW TO TURN ON THE POWER on page 9.
Select one of the pulse driven programs.
When the key
is inserted, the
manual mode
will automati-
cally be se-
lected and the
MANUAL indi-
cator will light.
To select one
of the pulse driven
programs, press the PROGRAM SELECT button re-
peatedly until the desired PULSE DRIVEN indicator
lights. Note: Both pulse driven programs are thirty-
minute programs.
The pulse
driven
programs
automatically
control the
speed and
incline of the
treadmill to
keep your
heart rate near predetermined settings during your
workout. When one of the pulse driven programs is
selected, the LED matrix will show all of the heart
rate settings of the program. Each program has
twenty heart rate settings. One setting is shown in
each vertical column of the LED matrix. The first
column will be flashing. Note: Every few seconds,
the words ÒENTER AGEÓ will scroll across the LED
matrix.
Enter your weight and age.
Although it is not necessary to enter your weight to
use a pulse driven program, you must enter your
age before one of these programs can be
started.
To enter you weight and age, refer to step 3 on page
10. If you have already entered your weight and
age, press either of the SET AGE buttons to ver-
ify the age setting. The words ÒPRESS STARTÓ will
then scroll across the LED matrix every few seconds.
6
7
1
2
3
HOW TO USE THE PULSE DRIVEN PROGRAMS
70
69
68
2
73
2
97
73
2
75
78
78
78
78
2
2
2
2
77
78
98
97
99
100
101
102
104
93
103
87
88
2
2
2
2
90
93
93
2
73
96
114
96
88
116
73
86
115
94
95
84
78
42
74
20
53
112
76
21
91
46
46
28
21
57
7
80
85
81
9
51
8
98
109
74
2
2
21
21
21
38
17
41
111
REMOVE THIS EXPLODED
DRAWING FROM THE USERÕS
MANUAL. SAVE IT FOR FU-
TURE REFERENCE.
Note: To identify the parts shown on this exploded drawing,
refer to the PART LIST on page 22 of the USERÕS MANUAL.
39
39
19
19
19
19
6
105
105
6
107
107
107
108
108
108
79
79
79
79
79
3
3
89
107
107
107
108
108
108
79
79
79
79
79
2
15
11
12
13
2
66
2
36
65
2
67
2
2
56
2
56
13
59
6
2
56
41
89
54
54
89
41
18
71
58
22
23
37
50
47
48
49
45
2
44
38
40
43
38
36
35
37
71
23
22
58
34
117
21
26
78
29
21
25
24
26
24
21
26
25
24
33
31
30
92
10*
55
71
63
64
1
61
67
2
56
106
93
27
21
62
82
82
24
2
16
14
14
113
52
105
3
110
72
28
3
105
6
5
32
83
21
21
32
65
36
4
60
3
89
EXPLODED DRAWINGÑModel No. IETL14070 R0399A
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Icon Image 10.6Q - IETL14070 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Icon Image 10.6Q - IETL14070 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Icon Image 10.6Q - IETL14070

Icon Image 10.6Q - IETL14070 Gebruiksaanwijzing - Deutsch - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info