502558
25
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
SYSTEM CONFIGURATION 25
ENGLISH
System Configuration
To change the Component Video assignment,
first make certain that the cursor is pointing
to the
COMPONENT IN line on the menu
screen, and then press the
/
Navigation
Button
E
F until you see the desired input
in the highlighted video.
When the desired component input has been
selected, press the
¤
Navigation Button
E
F go to the next setting.
At the
VIDEO PROCESS line, you are able
to select whether video format conversion, is to
be used with the input source being configured.
If you do not need to change the setting, simply
press the
/
¤
Navigation Button
E
F to
move to the next line.
The
V-CONVERSION setting will not apply
any video enhancement or processing to the
incoming video signal, but it will output it in one
of the following ways, depending on the input
source.
A standard-definition (480i or 576i) analog
signal (composite, S-video or component) will
be converted so that it is available as an HDMI
signal at its input resolution, as well as at the
standard composite, S-video or component
analog video outputs. The signal will also be
available at the record outputs.
An analog component high-definition signal
will be digitized and output at its input
resolution through the HDMI outputs and as
an analog component signal, but not through
the analog composite or S-video monitor or
record outputs.
• HDMI input signals, regardless of their resolu-
tion, will be output through the HDMI outputs.
The
BYPASS setting will not apply any video
enhancement or processing to the incoming
video signal, but it will output it in one of the
following ways, depending on the input source.
Analog signals (composite, S-video or compo-
nent) will output only in the resolution and for-
mat that matches the input for both the main
“Monitor” connection as well as for the record
outputs.
• HDMI input signals, regardless of their resolu-
tion, will be output through the HDMI outputs.
When any needed change to the video
processing setting has been made, press the
/
¤
Navigation Button
E
F to move to
the next line.
At the
A/V SYNC DELAY line, you are able
to enter a setting that delays the audio output
slightly behind the video so that the loss of lip
sync that may occur due to digital video process-
ing in the transmission of a program, in the play-
back unit or in the display is corrected. This lack
of lip sync is not a fault of the sources; rather, it
is a by-product of video signal processing. In
most cases, we recommend that the delay adjust-
ment be made using the direct-access controls
on the remote so that you may more accurately
adjust the delay while viewing the on-screen
image, following the instructions shown on page
35, but you may also make it here using the
menu system. As the amount of delay needed
may vary from one source to another, we strongly
recommend that you adjust it for each input.
To adjust the A/V sync delay time from the
IN/OUT SETUP menu, make certain that
the cursor is pointing to the
A/V SYNC
DELAY
line, and then press the
/
Navigation Button
E
F until the desired
amount of delay is applied so that the on-screen
video matches the audio.
When all configuration adjustments on this menu
screen have been made, press the
/
¤
Navigation Button
E
F until the on-
screen cursor is pointing to
PAGE 2 and then
press the Set Button
F
Q to move to the
second screen of input/output settings. If all set-
tings for input configuration are complete, press
the
/
¤
Navigation Button
E
F until
the on-screen cursor is pointing to
MASTER
MENU
and then press the Set Button
F
Q
to return to the main menu screen.
The second page of the
IN/OUT SETUP
menu (Figure 9) allows you to further configure
the AVR 645 for special custom features.
Figure 9
An exclusive Harman Kardon feature is the ability
to switch front panel jacks from their normal use
as inputs to output connections so that portable
recording devices may easily be connected. The
front panel analog Video 4 Jacks
Ô
are nor-
mally set as an input for use with camcorders,
video games and other portable audio/video
products, but they may be switched to an output
for connection to portable audio/video recorders.
To temporarily switch them to outputs, select the
IN/OUT SETUP menu. Press the
¤
button
E
F until the on-screen cursor is pointing
to the
VIDEO 4 line. Press the
button
E
F so that the word OUT is highlighted.
Note that the Input/Output Status Indicator
(
between the S and Composite video jacks
will turn red, indicating that the analog Video 4
jacks
Ô
are now record outputs.
On the AVR, the Coaxial 4 Digital Jack
Ó
is
normally an input, but it may also be switched to a
digital output for use with CD-R/RW decks, MD re-
corders or other digital audio recorders. To change
the jack to an output, press the
/
¤
buttons
E
F while the IN/OUT SETUP menu is
on the screen so that the cursor is next to
COAXIAL 4. Then press the / buttons
E
F so that the word OUT is highlighted.
Note that the Digital Coax 4 Status Indicator
(
will turn red, indicating that the jack is now a
record output.
Note: A signal will be sent to this jack only
when the input selected for use by the AVR is
digital. Digital signals will be passed through
regardless of their format, and which digital
input (optical or coax) they are fed from.
However, analog signals are not converted to
digital, and the format of the signal (e.g., PCM,
Dolby Digital or DTS) may not be changed.
Selection of the jacks as an output will remain
effective as long as the AVR is on. However, once
the unit is turned off, the jack will revert to its
normal use as an input when the unit is turned on
again.
The
REC OUT line enables you to select what
the audio output is at the analog record outputs
for the input source being configured. Press the
/
Navigation Button
E
F to choose
one of the following if you wish to change the
default setting:
ANALOG selects an unprocessed pass-
through of an analog source and is the default
setting for most inputs.
DSP DOWNMIX selects a two-channel
downmix of a multichannel digital input.
* IN/OUT SETUP *
VIDEO 4 : IN OUT
COAXIAL 4 : IN OUT
REC OUT : ANALOG
HDMI LINK : ON OFF
MASTER MENU PAGE 1
29851_AVR645_ENG 30/10/06 9:46 Side 25
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Harman Kardon AVR645 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Harman Kardon AVR645 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Harman Kardon AVR645

Harman Kardon AVR645 Gebruiksaanwijzing - Nederlands - 68 pagina's

Harman Kardon AVR645 Gebruiksaanwijzing - Deutsch - 68 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info