30121
40
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
Code 41 Code 42 Code 49
Aileron Rudder Aileron Flap Flap Aileron
Mixer Aileron Rudder Mixer Aileron Flap (for model type 7) Mixer Flap Aileron
40
A
I
L
E
R
U
D
D
+
3
3
%
Using code 41 the rudder can be affected, by an
adjustable amount, by the ailerons (particularly in
conjunction with aileron differential) to counteract the
negative yawing moment to achieve smooth circling
flight. The rudder remains fully controllable by the
rudder stick. The mixer can be switched on and off by
an external switch allocated via code 23. For speed
flight (code 52) the mixer is, in principle, automatically
turned off.
After calling code 41, the mix quota can be adjusted
using the INC and DEC keys (in 1% steps) and the
6 or 8 key (in 10% steps), and set to 0 by pressing
the CLEAR key, with direction of the mix being
changed by pressing the TURN key.
A
I
L
E
F
L
A
P
+
5
5
%
An adjustable amount of aileron control can be mixed
into the flap channel, via code 42, so the flaps will be
deflected in the manner of the ailerons on operation
of the ailerons, though normally with lesser deflection.
The advantage of this arrangement is increased rate
of roll and reduced drag at the same rate of roll, as a
result of the reduced aileron deflection required and a
more uniform lift distribution along the span of the
wing. The mixer can be switched on and off by an
external switch set with code 23.
After calling code 42, the mix quota can be adjusted
using the INC and DEC keys (in 1% steps) and the
6 or 8 key (in 10% steps), and set to 0 by pressing
the CLEAR key, with direction of the mix being
changed by pressing the TURN key.
The trim mixer can be switched on and off by
pressing the 5 key.
F
L
A
P
A
I
L
E
o
f
s
-
7
3
+
s
+
4
5
%
An adjustable amount of flap control can be mixed
into the aileron channel, via code 49, so the ailerons
will be deflected in the manner of the flaps on
operation of the flaps, though normally with reduced
deflection. The advantage of this arrangement is
reduced drag and a more uniform lift distribution
along the span of the wing.
After calling code 49, the offset adjustments may be
performed first, that is the mixer has to been informed
which position to the operating element for the flaps
(normally a slider-type potentiometer in channel 6) will
occupy in normal flight (with the flaps in the neutral
position). To this end the operating element is set
accordingly and then the STORE key is pressed.
The offset from the neutral position is shown on the
lower line of the display).
The mix quota can be adjusted using the INC and
DEC keys (in 1% steps) and the 6 or 8 key (in
10% steps), and set to 0 by pressing the CLEAR
key, with direction of the mix being changed by
pressing the TURN key.
Code 49 permits adjusting unequal mix quota and
directions. In the course of programming the
operating element for the flaps has to be set to the
end required to be adjusted.
40

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Graupner MC18 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Graupner MC18 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Graupner MC18

Graupner MC18 Gebruiksaanwijzing - Deutsch - 188 pagina's

Graupner MC18 Gebruiksaanwijzing - Français - 58 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info