30121
38
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
Code 23
Switch Function
Allocation of External Switch in F3B Models
38
External switches installed and connected to the plug
connections 1…8 are allocated to specific functions
by code 23. Some of these functions can be activated
and de-activated. The allocation can be performed to
suit the mechanical mode of operation of the switch
(open = ON, closed = OFF) or by reversing (open =
OFF, closed = ON).
In addition to physically existing switches a logical
“phantom switch” is also available, designated switch
number 9. By allocating this switch to a function, it
can be permanently switched on or off.
As any number of functions may be allocated to any
of the switches, linkages can be achieved for which,
otherwise, mixers would have to be used, which in
this way remain available for other purposes.
Allocation and Pole Reversal of External Switches
After calling code 23, the functions available for the
active model will appear on the upper line of the
display, with the allocated switches appearing on the
line below. Numerals indicate the switches wired to
the corresponding plug stations.
N means that the function in question is de-activated.
Flashing numerals indicate that the switch concerned
has been allocated with reverse polarity. The small
arrow (upper line) indicates the function to which the
switch can be allocated at the present time. It can be
moved to the right or left by pressing the INC and
DEC key, respectively.
As not all of the available functions can be shown at
the same time on the display, the latter can be moved
window style over the two lines, showing the
allocations. When the arrow points to the outermost
right function, the next function will appear in the
display when the INC key is pressed. They can be
scrolled left by pressing the DEC key. In this
manner any of the functions can be displayed.
To allocate the selected functions press the CLEAR
key. As a result a question mark symbol will appear
on the lower line. To switch be may allocated by
pressing keys 1 9 . If the switch is to be reversed,
the DEC key has to pressed first.
If a de-activatable, currently active function is
selected, pressing the CLEAR key will first de-
activate the function, pressing the CLEAR key a
second time will display the question mark symbol.
The type and number of functions, to which switches
can be allocated via code 23, depends on the
activated model type (code 58).
Available functions for model types 6 and 7
CLK Stopwatch in standard mode, runs as long as
switch is closed.
DI1 Differentiation switch 1 (see code 22)
DI2 Differentiation switch 2 (see code 22)
2 4 Mixer Ailerons Rudder
3 6 Mixer Elevator Flaps
2 7 Mixer Ailerons Flaps
STA Pre-set for Start
SPD Pre-set for Speed task
STR Pre-set for Distance task
Selection of individual functions:
C
L
K
D
I
1
D
I
2
2
4
N
9
9
9
4 x INC 4 x DEC
3
6
2
7
S
T
A
S
P
D
9
9
9
9
4 x INC 4 x DEC
S
T
R
9
Using code 73 the switch position, number and
direction of operation of the desired switch can be
found quickly and reliably.
38

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Graupner MC18 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Graupner MC18 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Graupner MC18

Graupner MC18 Gebruiksaanwijzing - Deutsch - 188 pagina's

Graupner MC18 Gebruiksaanwijzing - Français - 58 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info