776259
12
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
12 GMC-I Messtechnik GmbH
If no texts or ID numbers have been entered to the test instrument
when creating structures, ETC generates the missing entries
automatically. These can then be edited in ETC and transferred
back to the test instrument if required.
OFFSET RL-PE / RN-PE / RL-N
For the measurement of
ZL-PE, ZL-N, RE and
ΔU(ZLN), ohmic offset val-
ues RL-PE, RN-PE and RL-N
can be ascertained here,
which then appear in the
footers of the corre-
sponding measuring
menu pages and are sub-
tracted from the mea-
sured values.
Connect the mea-
surement cables to
the respective inputs
and short circuit the
test probes by insert-
ing the test plug into the short-circuiting jumper (PRO-
JUMPER, Z503J).
Start offset measurement by pressing the respective START
key.
The respective offset value cannot be activated or deactivated,
i.e. set to 0, unless all settings are returned to their default values.
There’s a separate offset value for RLO, which can be ascertained
directly in the RLO switch position.
Note
MEASUREMENT OF RL-PE OR RN-P
In the event that phase voltage might be applied to L or N
at the test probe or the measuring adapter during future
measurements, both offset values must be correspon-
dingly determined. Depending on the connection, the
corresponding offset value is then displayed later in the
measuring menu. If no phase voltage is applied, RL-PE
appears as a standard display
Note
In order to ascertain the RLN-OFFSET value for measurement
of ΔU(ZLN):
Connect the test probe to the point of common coupling
(measuring device / meter).
Firmware Revision and Calibration Information (example)
Press any key in order to return to the main menu.
Firmware Update with the MASTER Updater
The layout of the test instruments makes it possible to adapt
device software to the latest standards and regulations. Beyond
this, suggestions from customers result in continuous improve-
ment of test instrument software, as well as new functions.
In order to assure that you can take advantage of all of these ben-
efits without delay, the MASTER Updater allows you to quickly
and completely update your test instrument software on-site.
The user interface can be set to either English, German or Italian.
Note
As a registered user, you’re entitled to download the
MASTER Updater and the current firmware version free of
charge from the myGMC page.
Enter and Select a New Inspector
See also section 5.7 on page 15 regarding the entry of a text.
5 General Notes
5.1 Connecting the Instrument
For systems with earthing contact sockets, connect the instru-
ment to the mains with the KS-PROFITEST INTRO test probes
(Z503L) or with the PRO-Schuko measuring adapter (Z503K).
Voltage between phase conductor L and the PE protective con-
ductor may not exceed 253 V!
Poling at the socket need not be taken into consideration. The
instrument detects the positions of phase conductor L and neu-
tral conductor N and automatically reverses polarity if necessary.
This does not apply to the following measurements:
Voltage measurement in switch position U
Insulation resistance measurement
Low-resistance measurement
If measurement is to be performed at three-phase outlets, in dis-
tribution cabinets or at permanent connections, use the cable set
with KS-PROFITEST INTRO test probes (Z503L) (2-pole), and for
phase sequence testing (3-pole). Connection is established with
the test probes: one at PE or N and the other at L.
5.2 Automatic Settings, Monitoring and Shut-Off
The test instrument automatically selects all operating conditions
which it’s capable of determining itself. It tests line voltage and
frequency. If these lie within their valid nominal ranges, they
appear at the display panel. If they are not within nominal ranges,
prevailing voltage (U) and frequency (f) are displayed instead of UN
and fN.
3h
4
01.17.00
5
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gossen Metrawatt Profitest Intro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gossen Metrawatt Profitest Intro in de taal/talen: Engels als bijlage per email.

De handleiding is 1.69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info