776259
11
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
GMC-I Messtechnik GmbH 11
Significance of Individual Parameters
Test Instrument On-Time
The period of time after which the test instrument is automatically
shut off can be selected here. This selection has a considerable
influence on the service life and the charging status of the batter-
ies.
LCD Illumination On-Time
The period of time after which LCD illumination is automatically
shut off can be selected here. This selection has a considerable
influence on the service life and the charging status of the batter-
ies.
Submenu: (Rechargeable) Battery Level Query
If (rechargeable) battery voltage has dropped to 8.0 V or less, the
LIMIT LED lights up red and an acoustic signal is generated as well.
Note
Measuring Sequence
If (rechargeable) battery voltage drops
to below 8.0 V during the course of a
measuring sequence, this is only indi-
cated by means of a pop-up window.
Measured values are invalid. The measurement results
cannot be saved to memory.
Press ESC in order to return to the main menu.
Attention!
!
Data, including sequences, are
lost when the language, the pro-
file or the DB MODE is changed,
or if the instrument is reset to de-
fault values!
Back up your structures and
measurement data to a PC
before pressing the respec-
tive key.
The prompt window shown at
the right asks you to confirm
deletion.
User Interface Language (CULTURE)
Select the desired country setup with the appropriate country
code.
Caution: All structures and data will be deleted (see note above)!
Profiles for Distributor Structures (PROFILES)
The profiles are laid out in
a tree structure. The tree
structure for the utilized
PC evaluation program
may differ from that of the
PROFITEST INTRO. For this
reason, the
PROFITEST INTRO provides
the user with the opportu-
nity of adapting this struc-
ture.
Selecting a suitable profile
determines which object
combinations are made
possible. For example,
this makes it possible to
create a distributor which is subordinate to another, or to save a
measurement to a given building.
Select the PC evaluation program you intend to use.
Caution: All structures and data will be deleted (see note above)!
If you have not selected a suitable PC evalua-
tion program and, for example, if measured
value storage to the selected location within the
structure is not possible, the pop-up window
shown at the right appears.
Default Settings (GOME SETTING)
The test instrument is returned to its original default settings when
this key is activated.
Caution: All structures and data will be deleted (see note above)!
Adjust Brightness and Contrast
DB MODE – Database Representation in Text or ID Mode
Creating Structures in the TXT MODE
The database in the test instrument is set to the text mode as a
default feature and “TXT” appears in the header. You can create
structure elements in the test instrument and label them in plain text,
e.g. Customer XY, Distributor XY and Circuit XY.
Creating Structures in the ID MODE
You can work in the ID MODE as an alternative, in which case “ID”
appears in the header. You can create the structure elements in the
test instrument and label them with any desired ID numbers.
Note
When transferring data from the test instrument to ETC at
a PC, ETC always uses the same representation as the
test instrument (TXT or ID mode).
When transferring data from ETC at the PC to the test
instrument, the test instrument always uses the same
representation as ETC.
In other words, the respective data recipient always uses
the same representation as the data transmitter.
Note
Structures can be created in the test instrument in either
the text mode or the ID mode.
In contrast, designations and ID numbers are always
assigned in ETC.
0a
0b
2
3c
3d
3e
3f
Jump back to
Increase brightness
Decrease brightness
Increase contrast
Decrease contrast
previous menu
3g
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Gossen Metrawatt Profitest Intro bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Gossen Metrawatt Profitest Intro in de taal/talen: Engels als bijlage per email.

De handleiding is 1.69 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info