23
Filter in the water supply blocked.
1 Switch off the appliance and pull out
the mains plug.
2 Turn off the tap.
3 Clean filter in the supply hose.
4 Reconnect power supply.
5 Turn on the tap.
6 Switch on the appliance.
Water is left in the appliance at the end
of the programme.
(“:ƒ…) Waste water hose
is blocked or kinked.
Filters blocked.
(“:ƒ†) Waste water pump blocked,
cover on the waste water pump is not
locked in position
(see Waste water pump).
Filters blocked.
The programme has not yet ended. Wait until
programme ends (digital display indicates
‹:‹‹) or implement the “Reset” function.
Error code “:ƒƒ
Filters 1j are soiled or blocked.
Refill indicator for salt H and/or rinse-aid P
is not lit.
Refill indicator/s switched off.
Adequate salt/rinse-aid available.
Refill indicator for special salt H is lit.
No salt.
Refill with special salt.
Sensor does not detect salt tablets.
Use different special salt.
... during the wash cycle
Unusual foam formation.
Handwash liquid in the rinse aid dispenser.
Spilled rinse aid causes excessive frothing,
therefore please remove with a cloth.
Appliance stops during the wash cycle.
Power supply interrupted.
Water supply interrupted.
Filling valves making striking noises
Caused by the installation of the water line and
has no effect on the function of the machine.
Remedial action is not possible.
Knocking/rattling noise during rinsing
Spray arm is striking utensils.
Utensils not arranged correctly.
... on the utensils
Food residue on the utensils.
Utensils placed too closely together, utensils
basket overfilled.
Too little detergent.
Rinse programme too weak.
Spray arm rotation obstructed.
Spray arm nozzles blocked.
Filters blocked.
Filters incorrectly inserted.
Waste water pump blocked.
Top basket on right and left not set to same
height.
Tea or lipstick residue is not completely
removed.
The detergent has an inadequate bleaching
effect.
Too low rinsing temperature.
Too little/unsuitable detergent.
