633026
7
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
7
LED BUTTON
CONDITION
The DEFAULT
programming are in “bold”
ALARM SYSTEM
FUNCTION
NUMBER OF
PRESSES
OF THE LED
BUTTON
NUMBER OF
LED BUTTON
/LED FLASHES
FOR THE
FUNCTIONS
STATUS CHECK
LED OFF LED ON
Self-coding indicators
impulses number
1 1
Disabled
Enabled
Switches/Discriminators
signals stabilizer
2 2 Deactivated
Activated
Memorisation of
switches/discriminators
signals only after actuator
signals
3 3
Disabled
Enabled
Memorisation of actuator
signals of changeable type
4 4 Disabled
Enabled
Anti-hijack door signal
stabilizer
5 5
Deactivated
Activated
Acoustic signal when
arming/disarming the alarm
system
6 6 Deactivated
Activated
Visual signal when
arming/disarming the alarm
system
7 7
Deactivated
Activated
Courtesy light switching on
when disarming
8 8
Deactivated
Activated
To modify the settings proceed as follows:
1 - Press the LED BUTTON the number of times corresponding to the function you wish to
check or modify. The alarm generates an acoustic signal for each press.
Before showing the function state, the alarm system will generate acoustic signals and the
LED BUTTON will flash. For example: if you wish to check the function state “Acoustic signal
when arming/disarming the alarm system”, you will have to press the LED BUTTON 6 times,
check that it flashes 6 times and the LED BUTTON remains switched on (acoustic signal
activated) or switches off (acoustic signal deactivated).
2 - When the LED BUTTON shows the function state you are checking (the LED BUTTON
switched on or off), it is possible to modify the alarm system function condition by pressing
the same LED BUTTON.
3 - Once the function state has been selected, the LED BUTTON will flash to indicate that the
new condition has been memorised. If the LED BUTTON isn’t pressed again, or the ignition is
switched off within 2 minutes, the alarm system comes out from the set condition automatically.
4 - At this point, the alarm system will emit a long acoustic signal to confirm you have come
out from the SET FUNCTIONS.
When the alarm system functions have been programmed carry out the DOORS LOCK/
UNLOCK SIGNALS SELF-CODING (page 8).
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw GT 800-2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van GT 800-2 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info