Originalbetriebsanleitung FUXTEC FX-EB152/FX-EB162_de_en_fr_ita_rev16
36
● Keep the handles free of oil and petrol.
● Always use correct handles when working.
● Do not smoke when mixing the fuel or filling the tank.
● Do not mix fuel in an enclosed space or near open fires. Ensure sufficient
ventilation/air circulation.
● Mix and store the fuel mixture in a sealed container approved for such use
according to local regulations.
● Never remove the fuel filler cap while the engine is running.
● Do not operate the device in closed rooms or buildings. Exhaust gases contain
dangerous carbon monoxide.
● Do not try to adjust the device while walking or carrying it. Always set the device
on a flat, free surface.
● Do not use the device if it is damaged. Never remove protective devices from the
device. Failure to do so may result in serious injury to the operator or bystanders
and damage to the device.
● Never leave the device unattended.
● Don't stretch yourself too far forward. Always maintain a firm stand and balance.
Do not run the device while standing on a ladder or any other unstable standing
position.
● Children must not have access to the device. Spectators should stand at a safe
distance from the working area, at least 15 meters
● Do not use the device if you are tired, ill, or under the influence of medicines,
drugs, or alcohol.
● Use an undamaged drill attachment. If you hit a stone or any other obstacle, stop
the device and check it. A defective or unbalanced drill must never be used.
● Before starting, after failure or impact, always check the device and make sure
that it is in excellent condition
● Attention! Local regulations may limit the use of the device
● Observe, improper maintenance, the use of non-compliant spare parts or
removal, or modification of the safety devices can cause damage to the device
and severe injury to the person working with it.
● Secure the device properly during transport to prevent loss of fuel, damage to the
device, and injury. Always remove the drill bit before transport.
● For devices with a clutch, regularly check that the drill stops rotating when the
engine is idling.
● Check the device for loose fasteners, fuel leaks, damaged parts, etc. before each
use. Replace damaged parts before use.
● Keep your work area clean and well lit. Clutter or unlit work areas can lead to
accidents.
● Do not store the device in an enclosed area where fuel vapors can reach an open
fire from water heaters, stoves, etc. Store the device in a well-ventilated area
only.
