780046
56
Verklein
Vergroot
Pagina terug
1/70
Pagina verder
EN-56 Originalbetriebsanleitung Allgemein
Notice
If it is dicult to draw the cable sleeve out of the
holder in the gearshift unit, insert a 2 mm Allen key or
a #14 spoke in the hole in the ratchet wheel and rotate
it to loosen the cable. Then, rst remove the cable
fastening screw from the ratchet wheel before drawing
the cable sleeve from the cable sleeve holder.
CJ-8S20
JAPAN
LOCK
Turn the
ratchet
wheel Ratchet wheel hole
2 mm Allen key or #14 wrench
Remove the cable fastening
screw
Draw out of the
cable sleeve
holder
1
23
Fig. 131 Tip for removing the cable sleeve ©Shimano
CJ-8S20
JAPAN
LOCK
Cable fastening screw
Ratchet wheel
Fig. 132 Removing the cable fastening screw ©Shimano
6. Loosen and remove the screw on the brake arm.
7. Loosen the wheel nuts and set them aside. Remove the
lock washers from the wheel axle.
8. Pull the rear wheel out of the drop-out slots.
29.3 Dismantling the tyre and tube
1. Unscrew the valve cap, securing nut and eventually the
union nut from the valve.
2. Let the remaining air out of the tube.
3. Place the tyre lever against the valve on the inside
edge of the tyre.
4. Lever the tyre wall over the rim ange.
5. Push the second tyre lever approximately 10 cm away
from the rst between the rim and tyre.
6. Use the tyre lever to lever the tyre over the rim until
the tyre is loose over its entire circumference.
7. Remove the tube from the tyre.
29.4 Repairing the tube
1. Inate the tube.
2. To check where the tube is damaged, place the tube in
a container full of water.
3. Submerge the tube. Air bubbles will escape at the
position of the damage on the tube.
4. If the problem occurs while you are under way, and
you are unable to determine the position of the hole,
simply inate the tube heavily. It will become larger,
and the increased pressure and noise of the escaping
air will allow you to determine the position of the
hole.
5. Allow the tube to dry.
6. You can now repair the tube. Observe the usage
instructions on the repair kit.
Gearshift unit
CJ-8S20
JAPAN
LOCK
Fig. 129 Tip for removing the cable sleeve ©Shimano
3. Set the control element on the handlebars to 1.
4. Draw the cable sleeve out of the cable sleeve holder of
the gearshift unit and remove the cable from the slot
in the bracket.
1 Draw out of the cable sleeve holder
2 Remove from the slot
CJ-8S20
JAPAN
Bracket
Cable sleeve holder
Slot
1
2
Fig. 130 Removing the cable ©Shimano
5. Remove the cable fastening screw from the ratchet
wheel.
56

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Focus 2021 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Focus 2021 in de taal/talen: Engels als bijlage per email.

De handleiding is 5.36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Focus 2021

Focus 2021 Gebruiksaanwijzing - Nederlands - 71 pagina's

Focus 2021 Gebruiksaanwijzing - Deutsch - 72 pagina's

Focus 2021 Gebruiksaanwijzing - Français - 74 pagina's

Focus 2021 Gebruiksaanwijzing - Italiano - 71 pagina's

Focus 2021 Gebruiksaanwijzing - Espanõl - 72 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info