780046
54
Verklein
Vergroot
Pagina terug
1/70
Pagina verder
EN-54 Originalbetriebsanleitung Allgemein
28.1 Checking tyre pressure
Warning
Seriousfallsduetolackofbicyclecontrol.Overinated
tyrescanburstorcomeotherim.Thetyrecanburst
and cause an immediate loss of control. If the tyre
pressureistoolow,thetyrecancomeotherim.
The air pressure indicated on the tyre must not be
exceeded or undercut. A maximum air pressure
indicated for certain rims must not be exceeded. The
lowest maximum air pressure indicated on the tyre
or rim is applicable. The permissible tyre pressure
is given in bar or psi on the sidewall of the tyre and/
or on the rim. There are many tools on the Internet
that you can use to convert values from bar to psi,
or vice versa.
You should also observe the recommendations given
on the websites and in the operating instructions of
the tyre and rim manufacturers.
Information
Use a standing air pump with integrated pressure
display. This will allow you to check and adjust your
tyre pressure at any time. You will need an adapter for
certain valves. You can purchase these together with
the pump from your specialist workshop.
28.2 Tubeless tyres
Warnings
Serious falls due to bursting tyres.
Only use tubeless tyres on rims designed for this
purpose. These are identied accordingly with the
"tubeless ready” label.
Mount and remove tubeless tyres as far as possible
without using tools. Where necessary, however,
a plastic assembly lever can also be used. Be
extremely careful not to damage the sealing tyre
bead. This can lead to leaks. If the sealing uid is
not able to prevent a defect, a normal tube can be
used after removing the valve.
Tubeless tyres should be removed from the rim as
far as possible without using tools, otherwise leaks
may occur as a result. If the sealing uid is not able
to prevent a defect, a normal tube can be used after
removing the valve.
Please follow the tyre manufacturer's instructions.
Today, so-called tubeless tyres can be found primarily on
modern mountain bikes, and less often on racing bikes.
28.3 Tubes
The tube is necessary in order to maintain the pressure
inside of the tyre. This is lled by means of a valve.
28.3.1 Valves
There are three types of valves: Sclaverand or racing
valves, Schrader or car valves, and Dunlop or Blitz valves.
All three types of valves are protected from dirt with a
cover cap. Allow your specialist dealer to advise you which
air pump is most suitable for your valve.
Fig. 128
12 3
1 Sclaverand or racing valve
2 Schrader or car valve
3 Dunlop or Blitz valve
28.3.1.1 Sclaverandorracingvalves
To inate a tube with a Sclaverand or racing valve, proceed
as follows:
1. Unscrew the valve cap counterclockwise using your
ngers.
2. Unscrew the knurled nut counterclockwise.
3. Push the knurled nut briey into the valve with your
nger until air escapes.
4. Inate the tube with a suitable air pump. Note the
pressure information on the tyre.
5. Screw the knurled nut back on.
6. Screw the valve cap clockwise onto the valve.
54

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Focus 2021 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Focus 2021 in de taal/talen: Engels als bijlage per email.

De handleiding is 5.36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Focus 2021

Focus 2021 Gebruiksaanwijzing - Nederlands - 71 pagina's

Focus 2021 Gebruiksaanwijzing - Deutsch - 72 pagina's

Focus 2021 Gebruiksaanwijzing - Français - 74 pagina's

Focus 2021 Gebruiksaanwijzing - Italiano - 71 pagina's

Focus 2021 Gebruiksaanwijzing - Espanõl - 72 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info