780046
52
Verklein
Vergroot
Pagina terug
1/70
Pagina verder
EN-52 Originalbetriebsanleitung Allgemein
Tighten
Tensioning lever
Clamping
nut
Springs
Axle
Fig. 116 Quick-release skewer on the wheel
1. Open the tensioning lever by folding it by 180˚. OPEN
should now be visible.
2. Check that the wheel is correctly positioned.
3. Close the tensioning lever by swinging the lever by
180˚. CLOSE should now be visible. The lever should
be very easy to move from the beginning of the closing
movement up to halfway. Then, the force required to
move the lever must signicantly increase until the
lever is very dicult to move at the end.
4. a) If the quick-release skewer closes too easily, the
pre-tension must be increased: Hold the tensioning
lever and turn the clamping nut on the opposite side
clockwise. Check whether the correct pre-tensioning
has been achieved by closing the tensioning lever.
b) If the quick-release skewer is too dicult to close,
the pre-tension must be reduced: Hold the tensioning
lever and turn the clamping nut on the opposite
side counterclockwise. Check whether the correct
pre-tensioning has been achieved by closing the
tensioning lever.
5. Close the tensioning lever. The lever must be
positioned in such a way that it cannot be opened
accidentally.
27.2 Attaching wheels with through-axles
Warning
Serious falls due to loose components.
Close the lever as described. Otherwise, the wheel
may become loose while cycling, and you run the
risk of very serious or even fatal injuries. If you are
unsure, have a specialist workshop show you this
setting.
Through-axles are similar to quick-release skewers. While
quick-release skewers in wheels are pushed through the
axle of the hub, through-axles are themselves the axle.
Unlike quick-release skewers, they have a threaded
connection rather than a clamping nut. Through-axles can
the completely screwed on, or can rst of all be screwed on,
and then tightened using a lever, as on a quick-release
skewer. A further option is to attach the wheel using a
T-piece, which is then secured by means of a lever (e.g.,
R.A.T. through-axle).
Thread
Fig. 117 Through-axle Fig. 118 Through-axle with lever
Thread Tensioning lever
Axle
T-piece Rotary wheel
Axle Tensioning lever
Fig. 119 R.A.T. through-axle
27.2.1 Mounting a R.A.T. through-axle
1. Insert the R.A.T. axle with the lever in the open
position through the frame/fork and wheel, until the
T-piece at the end of the R.A.T. axle penetrates the
insert on the other side.
Insert
Fig. 120 Insert the through-axle
2. Turn the lever 90° clockwise until the T-piece hits the
insert. The axle should turn easily, and it should no
longer be possible to pull it out of the frame.
Fig. 121 Rotate the lever clockwise
3. Once the axle is in position, ip the lever to tension
the system.
Fig. 122 Tension the lever
52

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Focus 2021 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Focus 2021 in de taal/talen: Engels als bijlage per email.

De handleiding is 5.36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Focus 2021

Focus 2021 Gebruiksaanwijzing - Nederlands - 71 pagina's

Focus 2021 Gebruiksaanwijzing - Deutsch - 72 pagina's

Focus 2021 Gebruiksaanwijzing - Français - 74 pagina's

Focus 2021 Gebruiksaanwijzing - Italiano - 71 pagina's

Focus 2021 Gebruiksaanwijzing - Espanõl - 72 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info