780046
51
Verklein
Vergroot
Pagina terug
1/70
Pagina verder
Originalbetriebsanleitung Allgemein EN-51
26.2.2 Drop-out II: adjusting the belt tension
1. Pedelec/S-Pedelec: Remove the battery.
2. Loosen the four screws on both sides of the rear
stays by turning these counterclockwise. There are
two screws behind the plastic cover, and one of the
screws on the other side holds the side stand plate in
position. Do not remove the bolts completely.
3. You can increase or decrease the belt tension by
turning both setting screws.
Fig. 112 Setting the belt tensioning
2. Adjusting the setting
screws
1. Loosen screws
4. Tighten the four screws on both sides of the rear stays
clockwise to the specied tightening torque.
Plate xture
9.5 NM
Belt tensioning
16.5 NM
Belt
tensioning
16.5 NM
Fig. 113 Setting the belt tensioning
26.3 Checking the belt for wear
1. Pedelec/S-Pedelec: Remove the battery.
2. Check the belt for wear.
Fig. 114 Belt with no wear ©Gates
This belt is in good condition. The loss of blue colour is
not a sign of wear.
Fig. 115 Worn belt ©Gates
Missing teeth and cracks in the tooth root: This belt
is in a very poor condition.
3. When the safe wear limit has been reached, the belt
must be replaced. Have this done in your specialist
workshop.
26.4 Cleaning and care
Notice
Damage to the electronics due to water ingress.
Do not spray the bicycle or its components, either
with a water hose or with a high-pressure cleaning
device. Although the components are sealed,
damage to the cycle may still result. Clean the bike
with a soft damp cloth.
Please remove the battery before cleaning the belt on a
Pedelec or S-Pedelec. Then, clean the belt with a soft, damp
cloth. Allow it to dry before putting it back on your bike.
27. Wheels
Wheels provide the connection between your bicycle and
the road. They can be attached to the frame and fork using
axle nuts, quick-release skewers or through-axles.
27.1 Fastening wheels with quick-release
skewers
Warning
Serious falls due to loose components.
All quick-release skewers must be properly closed
before setting o. Quick-release skewers cannot be
closed by simply turning the lever.
Check that all quick-release skewers are rmly
seated before every use.
Do not bend the brake disc or hold onto it when
closing the quick-release skewer.
Wheels are attached to most bicycles using quick-release
skewers. These are clamping devices which have the
advantage that they can be quickly loosened and tightened
by hand. Quick-release skewers normally consist of ve
parts: the axle, the tensioning lever, the clamping nut and
two springs. The tensioning lever and axle are rigidly
connected to one another, while the clamping nut is
screwed onto the end of the axle. The tensioning lever
exerts a clamping force, and the clamping nut is used to set
the pre-tension.
51

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Focus 2021 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Focus 2021 in de taal/talen: Engels als bijlage per email.

De handleiding is 5.36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Focus 2021

Focus 2021 Gebruiksaanwijzing - Nederlands - 71 pagina's

Focus 2021 Gebruiksaanwijzing - Deutsch - 72 pagina's

Focus 2021 Gebruiksaanwijzing - Français - 74 pagina's

Focus 2021 Gebruiksaanwijzing - Italiano - 71 pagina's

Focus 2021 Gebruiksaanwijzing - Espanõl - 72 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info