796183
21
Verklein
Vergroot
Pagina terug
1/129
Pagina verder
Surface-restoration
grinders
RG 130 ECI
Dust extraction connec
tion 36 mm
Frequency 2402 MHz-2480 MHz
Equivalent Isotropically
Radiated Power (EIRP) < 10 dBm
Weight as per EPTA
procedure 01:2014 3.9 kg
5 Parts of the device
[1-1] Handle
[1-2] Speed control
[1-3] Bluetooth® button
[1-4] LED indicator
[1-5] Handle screw
[1-6] Auxiliary handle
[1-7] Spindle lock
[1-8] Tilting brush segment
[1-9] Brush
[1-10] Extraction attachment
[1-11] Locking button
[1-12] On/off switch
[1-13] Dust screen
The specified illustrations appear at the begin
ning of the Operating Instructions.
6 Commissioning
WARNING
Risk of injury, electric shock
Always disconnect the mains plug from the
socket before performing any work on the
machine.
WARNING
Unauthorised voltage or frequency.
Risk of accidents
The mains voltage and the frequency of the
power source must correspond to the
specifications on the name plate.
In North America, only Festool machines
with the voltage specifications 120 V / 60 Hz
may be used.
CAUTION
Breaking and flying insertion tools
Risk of injury
Do not use any damaged insertion tools.
After switching on the power tool and be
fore each use, check the insertion tools for
vibration.
CAUTION
Materials which produce a lot of dust
Damage to the power tool due to the ingress
of dust, risk of injury
Do not work overhead.
Always work with a dust screen.
6.1 Switch on/off
The switch [1-12] is an on/off switch (press =
ON, release = OFF).
The on/off switch [1-12] with the locking but
ton [1-11] can be engaged to operate in contin
uous mode. Press the on/off switch [1-12]
again to release the lock.
6.2 Electronics
Smooth start-up
The electronically controlled smooth start-up
function ensures that the power tool starts up
smoothly. The limited starting current ensures
that even standard household fuses are not
triggered.
Speed control
You can use the speed control [1-2] to continu
ously adjust the speed within the speed range
(see section 4).
The required speed depends on the sanding
disc and the material.
Overload safety device
The power supply is restricted if the power tool
is overloaded to extremes. The power supply is
disconnected completely if the motor jams for
some time. You will need to remove the load
and/or switch off the power tool before you can
use it again.
Restart protection
The built-in restart protection prevents the
power tool from starting up again automatically
if the power is disconnected during continuous
use. To put the power tool back into operation,
it must first be switched off and then on again.
English
21
21

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool RG 130 ECI bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool RG 130 ECI in de taal/talen: Alle talen als bijlage per email.

De handleiding is 2.9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info