796183
20
Verklein
Vergroot
Pagina terug
1/129
Pagina verder
ful environmental conditions during stor
age.
Handle and transport sanding tools with
care.
Pay attention to the information on the la
bel or the sanding tool itself, as well as us
age restrictions, safety warnings or other
instructions. If any points are unclear when
choosing sanding tools, the user must con
tact the manufacturer for information be
fore using the tool.
Sanding discs must be fitted in accordance
with section 6.4.
Only experienced staff are permitted to fit
sanding tools.
2.5 Emission levels
The levels determined in accordance
with EN 62841 are typically:
Sound pressure level LPA = 96 dB(A)
Sound power level LWA = 85 dB(A)
Uncertainty K = 3.0 dB
CAUTION
Noise generated when working
Risk of damage to hearing
Use ear protection.
Vibration emission level ah (vector sum for
three directions) and uncertainty K measured in
accordance with EN 62841:
ah = 4.0 m/s2
K = 1.5 m/s2
The specified emission levels (vibration, noise)
are used to compare machines.
They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
The actual load during the entire operating
cycle must be evaluated.
Depending on the actual load, suitable pro
tective measures must be defined in order
to protect the operator.
Grinding thin sheets of metal or other easi
ly vibrating structures with a large surface
can result in a total noise emission much
higher than the declared noise emission
values. Such workpieces should as far as
possible be prevented from emitting sound
by suitable measures such as the applica
tion of heavy flexible damping mats.
3 Intended use
The power tool is intended for surface sanding
on concrete surfaces, sanding off formwork
transitions and removing plaster, paint, adhe
sive residue, coatings or rust and for cleaning
concrete and wooden surfaces.
The power tool is designed for use with special
sanding discs according to EN 13236 recom
mended by the manufacturer (see section 6.4)
and must not be used with composite sanding
discs.
The power tool must only be used for dry sand
ing of large surfaces with a powerful mobile
dust extractor.
The user is liable for improper or non-in
tended use.
4 Technical data
Surface-restoration
grinders
RG 130 ECI
Power
EU
CH
GB
AUS
220–240 V~
230 V~
110 V~/230 V~
220–240 V~
Frequency 50–60 Hz
Power consumption 1600 W
Speed (no-load) 2200–6500 rpm
Sanding disc diameter 130 mm
English
20
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool RG 130 ECI bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool RG 130 ECI in de taal/talen: Alle talen als bijlage per email.

De handleiding is 2.9 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info