778812
22
Verklein
Vergroot
Pagina terug
1/126
Pagina verder
22
cutting performance of the machine (periph-
eral speed of the grinding and cutting wheels).
Set the sliding stop for cut depth [2-5] on scale
[2-4] to a depth value of 10 mm.
Push the arresting button [1-1] and push the
cover in.
Release the arresting button [1-1] and let the
cover be arrested when it gets to the set depth.
Unlock with button [2-1] and fully open the disc
cover.
Clean the fl ange [6-4] and clamping nut [6-2],
as well as the clamping faces of the cutting
disc [6-3].
Put the fl ange [6-4] on the grinder’s spindle
with the shoulder facing outward.
Put on the disc [6-3]; take care to comply with
the prescribed direction of rotation (arrow on
the disc vs. arrow on the machine). The fl ange
shoulder must exactly fi t in the disc’s opening.
Screw on the clamping nut [6-2] with the shoul-
der facing outward (from the disc), press on the
spindle arrest and tighten with wrench [6-1].
Close the disc cover.
Before switching on, check free rotational
movement of the disc.
8.2 Guide system [fi gure 7]
WARNING
Only use discs of thickness up to 3 mm!
Use the guide bar [7-1] for accurate cuts.
The side clearance of the disc guiding can be set
with the aid of the adjusting screws [1-9].
Guide bars
On the bottom face of the guide bar there are anti-
skid strips, which ensure safe contact and prevent
the workpiece from scratching.
The bar can also be secured with the aid of special
clamps FSZ 300 [7-2], pushed into the special
guide grooves. Safe guiding on uneven surfaces
is thus enabled.
WARNING
The guide bars are equipped with burr protec-
tor, which must be cut off before the fi rst use.
Connector
Depending on the particular application and the
workpiece size, several guide bars can be con-
nected with the aid of a connector spring [7-3].
Fast connection of guide bars can be secured by
screws in the threaded openings.
9 Activation
WARNING
Risk of accident if the machine is operated us-
ing unauthorised voltages or frequencies.
The mains voltage and the frequency of the
power source must correspond with the spec-
ifi cations on the machine’s name plate.
In North America, only Festool machines with
the voltage specifi cations 120 V/60 Hz may
be used.
Set the sliding stop for cut depth [2-5] on scale
[2-4] (top edge of the stop) to the requested depth
of the cut – loosen and tighten the stop screw [2-
6] as necessary.
The cut depth scale is valid for cutting without a
bar.
The scale is for orientation only. The actual depth
of the cut may be affected by, for example, manu-
facturing tolerances or the wear of the diamond
disc’s segment. If en exact depth is required, it
is necessary to measure the actual depth on a
test cut.
9.1 Switching on off
Switching on
Slide the on/off switch [1-5] forwards.
Continuous operation: pressing the front part
of the switch at the same time locks the on/
off switch.
The electric power tool starts.
Only make contact with the material once the
machine has reached operating speed.
Switching off
Lift the electric power tool from the processed
material.
Release the on/off switch [1-5].
During continuous operation: press on the
rear part of the on/off switch [1-5].
WARNING
Risk of injury
Rebound, ejected parts
Before setting down the machine, wait until
the rotating tool has come to a complete stop.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Festool DSC-AG 125 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Festool DSC-AG 125 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 7.06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info