72 Ferm
ANNEX 5 - PARTS LIST BED/HEADSTOCK
MAIN SHAFT NR PART/TOOTH PITCH/MOD. SPEC./DIM.
1 GEAR WHEEL/51 /1 /D8
2 GEAR WHEEL/68 /1 /D8
3 GEAR WHEEL/25 /1 /D8
4 GEAR WHEEL/75 /1 /D8
5 GEAR WHEEL/76 /1 /D8
6 GEAR WHEEL/24 /1 /D8
7 GEAR WHEEL/24 /1 /D8
8 GEAR WHEEL/76 /1 /D8
9 GEAR WHEEL/56 /1 /D8
10 GEAR WHEEL/56 /1 /D8
CHANGE WHEELS
11 GEAR WHEEL/30 /1 /D8
12 GEAR WHEEL/42 /1 /D8
13 GEAR WHEEL/49 /1 /D8
14 GEAR WHEEL/28 /1 /D8
15 GEAR WHEEL/63 /1 /D8
16 GEAR WHEEL/70 /1 /D8
17 GEAR WHEEL/84 /1 /D8
18 GEAR WHEEL/98 /1 /D8
19 GEAR WHEEL/105 /1 /D8
SUPPORT
20 GEAR WHEEL/17 /1 /D8
21 GEAR WHEEL/51 /1 /D8
22 GEAR RACK /2 *) /L425
23 GEAR WHEEL/17 /2 *) /D8
24 LOCK NUT M3/ *) /L30
25 STARTING SHAFT *) /L425
26 WASHER NUT M2/ *)
27 SPINDLE *)
28 WASHER NUT M2/ *)
29 SPINDLE *)
TAILSTOCK/REITSTOCK
30 WASHER NUT M2/ /L27 *)
31 SPINDLE /L50 *)
*) This parts are already mentioned in the list op parts.
5
BENCH LATHE MD-500
THE NUMBERS IN THE FOLLOWING TEXT
CORRESPOND WITH THE PICTURES AT PAGE 2
TECHNICAL SPECIFICATIONS
THE MD-500 IS DELIVERED IN THE
FOLLOWING BASE PERFORMANCE
Machinebed with prism conductor, ferme head with
main shaft and drive for automatic longitudinal feed and
thread cutting, tail stock with sliding tube and transverse
adjustment, electro motor with start/stop- and sense of
rotation switch, support with lock case, combined with
starting/lead screw, cross slide with rotating plate and
tool slide, fourfold tool holder with index pin, 3-chuck
with extra exterior basins and measuring certificate,
drive protection case, 7 change wheels, 3 driving-belts, 2
centers, 3 open-end spanners, 2 socket head wrenches,
catch pin and a tightening-wrench chuck.
Excluded under-carriage (art. nr.330956).
USE
The metal lathe has been designed for processing,
mechanically removing metal, of ferrous and non-
ferrous metals, synthetics and wood. The metal lathe is
meant for semi-professional use and for leisure
interests.
SAFETY INSTRUCTIONS
The following symbols are used in these instructions for
use:
Denotes risk of personal injury, loss of life or
damage to the tool in case of non-observance of
the instructions in this manual.
Denotes risk of electric shock.
Carefully read this manual before using the machine.
Make sure that you know how the machine functions and
how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly.
Keep this manual and the enclosed documentation with
the machine.
When using electric machines always observe the
safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions.
Keep these instructions in a safe place!
At the design of the machine is made allowance for the
requirements for a safe use. Every change, adaptation,
reconstruction or other adaptation use can cancel the
safety of the object. Besides the guarantee will expire
through this.
Before, after and during working with the lathe a number
of safety rules have to be taken. By the presence of
turning parts and sharp objects very severe injury can
arise. Especially the bits of the turning chuck are very
dangerous.
• The lathe has been designed for manufacturing
unruly material and so it has to be able to develop a
lot of power.
That is why touching turning parts is perilous. For
this reason unlawfully, undesirably or unintentionally
switching on the machine has to be prevented, for
example by the pushed in locking of the emergency
stop valve by means of a small padlock.
• By the elastic working of the chisel metal parts can be
shoot away with a big power at the most unexpected
moments.
• Protection of the eyes is very important. Make it a
habit to wear special safety glasses when you are in
the space where the lathe stands. Buy yourself a
professional and tested copy which you can wear for a
long time and if need be for visitors a cheaper one, but
this one also has to be a good performance.
• If you take care of a cheerful workshop you can
prevent for example gripping in the machine or falling
by stumbling over flinging about material.
• Be very careful when you make turning pieces of
work with the hands.
• When you want to polish a surface turning, then take
a long piece of polish paper which you can place half
around the piece of work, with the ends to your
direction.
Mains voltage | 230 Volt
Mains frequency | 50 Hz
Absorbed power | 370 Watt
Center height | 110 mm
Center distance | 500 mm
Max. turndiameter above bed | 200 mm
Max. turndiameter above |
support | 115 mm
Culvert and recording main |
shaft | 18 mm, MT-3
Number of speeds main shaft | 6
No load speeds main shaft | 120-2.000/min
Automatic start | 11 mm, 0.04 - 0,3
Thread cutting (right) | 11 mm, M0.4 - M3
Distance toolholder |
centerline measured vertically | 15 mm
Rotating plate movement: | 360º
Graduation rotating plate: | ± 45º
Movement tool cut | 70 mm
Movement cross slide | 115 mm
Movement end slide | 500 mm
Graduation slide screws | 0.04 mm
Recording and |
stroke slide tube | MT-2, 50 mm
Graduation slide tube | 0.05 mm
Weight | 115 kg
Sound pressure Lwa | 70.0 dB(A)
Vibration value | 2.8 m/s
2
Ferm 5
