Assembly of the sausage filling attachment
• Place the motor block onto the table.
• Place the following into the casing in the
right order: complete feed screw, the plas-
tic cap and the exit nozzle (with the narrow
end to the front) onto the screw bolt.
• Screw on the closing ring until tight.
• Connect the assembled casing to the
motor block.
• Connect plug to the main socket.
If you pull the sausage skin over the nozzle,
please ensure that the air openings on the exit
nozzle are not covered.
After you are finished, dismantle the applian-
ce in the same manner as for mincing meat.
• The appliance has a mechanical protection
fixture which protects the motor from
destruction - the teeth on the drive coupling
of the feed screw will break off if the appli-
ance is overloaded (e.g. if bones get into
the casing).
To repair the damaged coupling, unscrew
the screw on the feed screw. Replace the
old coupling.
Special accessory nr. 19 08 810
V
egetable slicer: Assembly of the vegetable chopper
14
Operation and use
Mincer casing
Feed screw complete
Distance piece
Sausage filling
attachment
Closing ring
Do not cover!
Feed screw Coupling Screw M5x20
Fine blades
Larger blades
Slicer
Puree attachment
Food pusher
Tray
Casing
Snap catch
