820911
3
Verklein
Vergroot
Pagina terug
1/3
Pagina verder
3 / 3
7 • SETTINGS AND FUNCTIONS VIA REMOTE CONTROL
REMOTE CONTROL MDi/PDi (item no. EM10425509)
NB: For optimum reception, when programming the settings, point the remote control at the detector.
Please note that if the sun shines directly on the sensor, the standard detection range of approx. 8 m may be
dramatically reduced owing to the sun’s infrared rays.
1. Setting via remote control
The DIP switch 1 on the detector needs to be set as shown in the illustration.
Button Customised setting
Entering programming mode
Blue LED lights up on the detector, indicating “blue mode”
(programming mode). The connected lighting turns on.
Whilst in programming mode, the detectors movement sensor is disabled.
Set switch-on light value with button or fixed light value.
Inputting the current ambient lighting level (between 5 - 2000 lux)
as the switch-on value
Connected lighting and the blue LED switch off. Once the input process has been
successfully completed, the lighting turns on and the blue LED lights up continuously.
Fixed switch-on values (10 - 2000 lux)
Confirmed by blue and red LED on the detector flashing alternately.
Determining a time setting for channellighting-C1”: 1 min and 15 min (*) or
short pulse: once the detector has been triggered by movement (lighting is below
preset ambient lighting level), the lighting and the red LED will be switched on for
1 second and then off for 9 seconds.
Confirmed by blue and red LED on the detector flashing alternately.
Note * : 2 x key = switch-off delay time 30 min.
Valid for products marked with * on page 1.
Determining a time setting for channel “HVAC-C2”: 1 min and 60 min or
short pulse: once the detector has been triggered by movement, the channel
and the green LED will be switched on for 5 seconds and then off for 5 seconds.
Confirmed by blue and green LED on the detector flashing alternately.
Alternating between “fully automatic” andsemi-automatic” operation modes
Semi-automatic mode = press button, the blue LED will turn off for approx. 3 seconds.
Fully automatic mode = press button, the blue LED will flash for approx. 3 seconds.
Switching LEDs on / off (red / green LED)
To switch LEDs off = press button, the blue LED will turn off for approx. 3 seconds.
To switch LEDs on = press button, the blue LED will flash for approx. 3 seconds.
Reinstating factory settings
Confirmed by blue and red LED on the detector flashing alternately.
Exiting programming mode
Blue LED goes out; settings are now saved.
The detector will now operate automatically according to the preset values.
NB: If the programming mode is not exited by pressing the button, the detector
automatically exits the programming mode 10 minutes after the last button was pressed.
Additional functions via REMOTE CONTROL MDi/PDi remote control
Checking the range / detection using test mode
Connected lighting turns on – for clear inspection / pacing out of a detector’s field
of detection. Real-time, load-free indication of movement given by 2 flashes of the
blue LED.
NB: Exit test mode by pressing the “TEST” or “RESET” button.
Switch “lighting C1” on / off manually (replaces button)
“Continuous lighting 4 h ON / OFF” for “lighting-C1”
The lighting can be switched on or off at any time for a duration of
4 hours by pressing the button. Once the 4 hours have expired,
the detector switches back to the corresponding set operating mode.
NB: When the “4 h ON / OFF” feature is activated, the detector no longer responds to
movement and is not controlled by the light value.
Interrupting the “TEST”, “light ON / OFF”, “light 4 h ON / OFF” functions
The detector switches back to the corresponding set operating mode.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Esylux MD-C serie bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Esylux MD-C serie in de taal/talen: Engels als bijlage per email.

De handleiding is 0.57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Esylux MD-C serie

Esylux MD-C serie Gebruiksaanwijzing - Nederlands - 35 pagina's

Esylux MD-C serie Gebruiksaanwijzing - Deutsch - 3 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info