617854

Epson LabelWorks LW-600P Handleiding

1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
See other side for how to use printer.
Installation Manual
Read this document carefully to use this product safely and correctly.
If your product is faulty, please read the included warranty card and
contact the store you purchased it from. If you require further assistance,
contact your local Epson customer support center.
See the Epson website for more information.
Before using the printer, check that you have all the items below.
Contact your place of purchase if anything is missing or damaged.
Front
Rear
LW-600P
Tape cartridge
USB cable
AC adapter (AST1116Z1-1)
Documents
• Installation Manual (this sheet)
Describes the setup procedures needed to use the printer, and
provides information on printer problems and safety.
• Supplies Catalog
Epson has a variety of tapes for many di erent applications.
The Supplies Catalog has information on tape cartridges and
other consumable parts for the printer.
Checking Package Contents
Names and Functions of Parts
Cleaning
1.
button
Turns the printer power ON/OFF.
2.
lamp
Indicates the printer's error status.
3.
lamp
Indicates the printer battery's remaining
charge (approximate).
4.
lamp
Indicates the printer's status.
5.
Printer cover
Can be opened to insert a tape
cartridge, or for print head cleaning.
6.
Tape outlet
Printed labels come out here.
7.
Printer cover tab
Pull this tab to open the printer cover.
1.
Security hole
Lets you secure the printer to a desk or post
with a commercial security wire lock or
similar tool.
2.
Battery cover
Opened when inserting or replacing
batteries.
3.
USB port
Connects the included USB cable.
4.
Power jack
Connects the included AC adapter.
5.
Bluetooth
button
Press this button and the
button at the
same time to enable/disable Bluetooth.
For your safety, read the attached documents carefully to use this product
correctly. After you have read all instructions, keep this manual handy for future
reference and to make your concerns clear.
Items below indicate safety precautions to protect users, their surroundings and
their property from possible injury or damage.
Precautionary notations are categorised as follows according to personal injury
and damage to the equipment if the instructions are ignored or the equipment is
misused.
DANGER
This symbol indicates information that, if ignored, could possibly result in serious or fatal
personal injury. Take extra caution in performing procedures with DANGER headings.
WARNING
This symbol indicates information that, if ignored, could possibly result in serious personal
injury or even death due to incorrect handling.
CAUTION
This symbol indicates information that, if ignored, could possibly result in personal injury,
physical damage, or damage to equipment due to incorrect handling.
The following describes the meaning of each symbol used in the precautions.
This indicates an
important reminder.
This indicates a
prohibited item.
This indicates a
mandatory procedure.
DANGER
When handling batteries
If liquid leaking from an alkaline battery gets into your eyes, do not rub
your eyes but immediately wash them well with clean water and contact a
doctor. Otherwise, it may cause blindness.
WARNING
When using the AC adapter and power cable
Do not use any AC adapter or power cable other than the dedicated AC
adapter and power cable. Do not use the AC adapter with other than the
speci ed voltage also. Otherwise, damage, overheating,  re or electric
shock may occur.
Take the following precautions when handling the AC adapter and power
cable.
• Make sure to avoid octopus wiring.
• Make sure the plug is not dusty before inserting it into an outlet.
• Insert the plug  rmly into the outlet.
• Do not hold the AC adapter or the plug with wet hands.
• Do not pull the power cable when disconnecting the plug. Be sure to
hold the plug when disconnecting it.
• Do not make any modi cation to the AC adapter or power cable.
• Do not apply strong shocks to or put a heavy object on the AC adapter or
power cable.
• Do not bend or twist the AC adapter or power cable forcibly.
• Do not place the AC adapter or power cable near a heater.
Do not use any damaged AC adapter or power cable. Otherwise, damage,
overheating or smoking may occur, which may result in  re or electric shock.
Do not touch the plug during thunderstorms.
When handling batteries
Keep batteries out of reach of children. They are extremely dangerous if
swallowed.
When using this product
Do not apply any strong force or shocks to the product such as standing
on, dropping or hitting it. Otherwise, the product may be broken, which
may result in  re or electric shock. If it is damaged, turn o the power
immediately, unplug the AC adapter and remove the batteries, and then
contact the Epson customer support centre. Continuous use may result in
re or electric shock.
Take care not to spill any beverage such as tea, co ee or juice onto the
product, or to spray aerosol insecticide. It may cause malfunction,  re, or
electric shock. If any liquid has been spilled on the product, turn o the
power, unplug the AC adapter and remove the batteries immediately, and
then contact the Epson customer support centre. Continuous use may
result in  re or electric shock.
Do not touch the printhead because it becomes very hot. Otherwise, there
is a risk of burns.
Do not open any covers other than the top cover or battery cover. Doing
so may result in  re or electric shock. Always use the product as instructed
in this manual. Otherwise, damage or injury may occur.
Never modify or disassemble this product. Doing so may cause  re or
electric shock.Do not carry out any operations not described in this
manual, or the product may break or cause injury.
If any of the following abnormalities is observed, turn o the power
immediately, unplug the AC adapter and remove the batteries, and then
contact the Epson customer support centre.
• If smoke, strange odours or unexpected noises come from the product
• If liquid or foreign objects get inside the product
• If the product has been dropped or damaged
Do not touch the tape eject slot, during printing or when the auto cutter is
in operation. Otherwise there is a risk of injury.
May exert electromagnetic interference on, and cause malfunction of,
cardiac pacemakers. Before using this product, check that there is no one
in the vicinity using a cardiac pacemaker.
May exert electromagnetic interference on, and cause malfunction of,
sensitive medical equipment. Before using this product, check that there is
no sensitive medical equipment in the vicinity.
Use of this product on aircraft may be restricted in some countries. Before
using this product, check that use of this product is not restricted on the
aircraft.
When handling the auto cutter
Do not touch the tape outlet slot (where the labels come out) during
printing or when the auto cutter is in operation. Otherwise, there is a risk
of injury.
Others
Do not use or store the product, batteries, AC adapter, power cable, or tape
cartridges in the following places.
• In direct sunlight.
• Where it may become extremely hot such as in a vehicle with the
windows closed.
• Where it may become extremely hot such as near a heater or the
temperature becomes very unstable such as near the exhaust duct of an
air conditioner.
• Where the product may get wet due to a shower or rain such as in a
bathroom or outdoors.
• In a dusty place or where the product may be exposed to smoke or steam
such as near the kitchen or a humidi er.
• On an unstable place such as on a shaky table or on an inclined place.
• Where it might be subjected to vibration or shock.
• Near high-voltage power lines or something that generates a magnetic
eld.
Keep the plastic bags used to contain the product or this manual out of
reach of children. Children may su ocate if they swallow them or put their
heads into the bags.
CAUTION
When handling batteries
If liquid leaks from a battery, wipe it o with a cloth and replace it with a
new one. If the liquid comes in contact with your skin, wash it away with
water immediately.
If the batteries are used incorrectly, they may cause leakage, overheating,
explosion, erosion, or damage to the product, which may result in  re or
injury.
• Do not use new ones and old batteries together, or mix di erent types of
batteries.
• Use AA alkaline batteries.
• Use batteries in the correct directions.
• Take the batteries out immediately when they have no power remaining.
• Take the batteries out if you do not use the product for a long time.
• Do not heat batteries or throw them in  re or water.
• Do not pinch the batteries with metal tweezers or use any pointed sharp
metal object such as the tip of a mechanical pen or ball-point pen when
taking the batteries out.
When disposing of used batteries, make sure to follow the regulations.
When using the AC adapter and power cable
Do not unplug the AC adapter while the product is in operation, otherwise
printing may not be successful.
Do not use the AC adapter in a small, con ned space, or cover it with a
cloth. Otherwise, the AC adapter may overheat and deteriorate.
When using this product
Do not stand or put anything heavy on the product or place it on an
unstable place such as on a shaky table or on an incline. Otherwise, the
product may fall and cause injury.
To ensure safety, unplug this product before leaving it unused.
Before cleaning, make sure to unplug the AC adapter from the outlet, and
remove the batteries.
Do not use a moistened cloth or solvents such as alcohol, thinner or
benzine.
Safety Instructions
Printer
Dimensions Approx. 54 (W) x 132 (D) x 146 (H) (mm)
Weight Approx. 440g
(excluding batteries, tape cartridge)
Supported tape
width
6 mm, 9 mm, 12 mm, 18 mm, 24 mm
Interface USB 1.1 Full-speed, Bluetooth
Operating
temperature
5 to 35 degrees C
Storage
temperature
-10 to 55 degrees C
Speci cations
CAUTION
Always turn the printer OFF before cleaning.
Always use dedicated tape cartridges having the
symbol.
Always perform the tape feed operation after inserting a tape
cartridge.
Printer
Wipe the printer with a soft, dry cloth.
Never use solvents or chemicals such as benzine, paint thinner or
alcohol. Never use a chemical cloth.
Print head
If streaks or smears appear on printouts, use a cotton swab or
similar materials to wipe dirt o the print head.
1.
Pull the tab to open the printer cover.
2.
Clean the print head.
3.
Close the printer cover.
Replacing the tape cartridge
1.
Pull the tab to open the printer cover.
2.
Remove the tape cartridge by pressing in the tabs on both
sides.
Tabs
3.
Place a new tape cartridge in the printer.
4.
Close the printer cover.
Do not block or insert objects into the included AC adapter socket or the
tape eject slot.
To comply with RF exposure compliance requirements, a distance of at
least 22 cm must be maintained at all times between the antenna of this
product and people in the vicinity.
Others
The included disc is a data DVD-ROM for computers. Do not play it in an audio DVD
player. Otherwise a very loud sound may be emitted, causing risk to both your
hearing and your audio equipment.
Be careful of continuous use of which may cause eye fatigue.
When handling tape cartridges
• Make sure to use a dedicated
LC Tape.
• Some types of tape cannot be cut by the cutter. For the details, refer to the
tape’s manual.
• Do not drop it or disassemble it. Doing so may cause damage.
• Do not pull out the tape forcibly by hand. But make sure to feed the tape.
Otherwise, the tape cartridge may be broken and unusable.
• Avoid using a tape cartridge without remaining tape. Doing so may cause
overheating of the printhead, which may result in damage or malfunction.
MEMO
Tape cartridges contain ink ribbons in them. When disposing of tape cartridges,
make sure to follow the local regulations for disposal.
DVD-ROM software
Take care to prevent the DVD-ROM from being subjected to excessive force
or becoming scratched. Do not store the DVD-ROM in excessively hot or cold
locations.
Frequency Precautions
The frequency band for this product is 2.4 GHz. This frequency range is the
same frequency bandwidth as industrial, scienti c, and medical devices such
as microwave ovens and mobile unit identi cation (RF-ID) systems (licensed
premises radio stations and unlicensed speci ed low-power radio stations)
used in factory production lines. Before using this product, check that there
are no radio stations for mobile unit identi cation or speci ed low-power
radio station premises nearby. In the event that this product should interfere
electromagnetically with the premises of a radio station used for mobile unit
recognition, cease use immediately and stop generating the electromagnetic
eld. Contact your local Epson customer support center if this product interferes
electromagnetically with a special low-power radio station used for mobile unit
identi cation or causes similar problems.
International Travel Precautions
Wireless devices are designed to conform to the channel and frequency limits
of the country they are intended to be used in. This product is based on the
speci cations of the country of sale. If this product is used outside the country of
sale, check with your local Epson customer support center for more information.
Other cautions
• Take care not to cut your  ngers when cutting the label with scissors.
• Do not attach a label on human bodies, living things, public facilities ore other
people’s belongings.
• Be sure to turn the power o after use.
Software operating environment
Label Editor/Label Editor Lite
Supported operating systems Windows
Mac OS X
Occupied hard
disk space
Windows About 300 MB
Mac OS X About 40 MB
External drive DVD-ROM drive
Display 1,024 x 768 (XGA) or higher
resolution
Interface USB 1.1 Full-speed
Power Supply
AC adapter
Type AST1116Z1-1
Manufacturer Seiko Epson Corp.
Input AC100-240V, 0.4A, 50-60Hz
(dedicated adapter, power cable
only)
Output DC11V, 1.64A
Total output power
18.04 W
Battery AA alkaline battery x 6
Bluetooth® and the Bluetooth logo are the trademarks of Bluetooth SIG,
Inc.
International ENERGY STAR® Compliance Statement
The purpose of the International ENERGY STAR® Program is to promote
the development and popularization of energy-e cient o ce
equipment.
As an ENERGY STAR® Partner; Seiko Epson Corporation has
determined that this product meets the ENERGY STAR®
guidelines for energy e ciency.
Label Editor DVD-ROM (for Windows only)
Contains the following items:
Software
• Label Editor
Software used for label editing. Used with a computer to
create labels that can be printed with the printer. To be
installed in the computer connected to the printer.
• Printer driver
To be installed in the computer connected to the printer.
• Network Con guration Tool
To be installed in the computer connected to the printer if
using a network-compatible printer model. (This printer is not
network compatible.)
Instruction manuals
• Label Editor User's Guide
Describes how to use the Label Editor software.
• Network Con guration Guide
Describes the network connection method. Read this guide if
using a network-compatible printer model. (This printer is not
network compatible.)
MEMO
If using Mac OS X, download the software and printer driver from
the Epson website. See the Epson website for more information.
http://www.epson.com
To view the documents, you need Adobe Reader.
Epson iLabel
Supported OS iOS
Android
Communication
method
Conforms to Bluetooth® Speci cation Version 2.1
+ EDR
Output Bluetooth® Speci cation Version Power Class 2
Maximum
communication
distance
About 10 m
Guideline  gure. Actual communication
distance may vary depending on surrounding
environment.
Frequency band 2.4 GHz band (2.4000 to 2.4835 GHz)
Pro le SPP
Opening the instruction manuals
Follow the steps below to view the instruction manuals on the
DVD-ROM.
1.
Insert the DVD-ROM in the computer's DVD-ROM drive.
2.
Click "User's Guide".
3.
Click the manual you want to view.
The selected instruction manual is displayed.
Click
Read this document carefully to use this product safely and correctly.
Read this document carefully to use this product safely and correctly.
Read this document carefully to use this product safely and correctly.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Epson LabelWorks LW-600P bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Epson LabelWorks LW-600P in de taal/talen: Engels als bijlage per email.

De handleiding is 1,67 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Epson LabelWorks LW-600P

Epson LabelWorks LW-600P Installatiehandleiding - Nederlands - 2 pagina's

Epson LabelWorks LW-600P Installatiehandleiding - Deutsch - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info