536726
17
Verklein
Vergroot
Pagina terug
1/62
Pagina verder
15
status of the plug-in light fixtures or home appliances
without controlling via Smart Home Box.
LEARNING ID CODE
In order to communicate with the Smart Home Box, the
Smart Home Box will send ID code to the receiver. To
proceed with ID code learning:
1. In the front cover, there is an On/Off knob with
LED indicator.
2. Press the knob for 3 seconds until the LED
flashes rapidly, and then release the knob. The
receiver is about to learn the ID code.
3. Set the Smart Home Box into Home Automation
mode. Select ‘6-1 Green Control’, input Green
Control number and select ‘:1 Link Panel to
Receiver so as to emit the ID code to Green
Control.
4. If the receiver learns the ID code properly, the
LED will turn on and then off. If failure, re-try
step (2), (3) as mentioned above.
Note: DO NOT connect the receiver to light fixture,
electrical fans or other appliances to avoid possible
dangers which might be caused by ON/OFF test.
WALL SWITCH
INSERTING THE BATTERY
1. Using a flat screwdriver to detach the front case.
Fit the 23A 12V battery in the compartment with
battery leads ‘+’ to ‘+’ and ‘-‘ to ‘-‘.
2. By pressing the wall switch, the LED will illuminate,
implying that the battery has been inserted
properly.
EMITTING ID CODE
In order to communicate with the Smart Home Box, the
wall switch will send ID code to the Smart Home Box.
To proceed with ID code learning.
1. Set the Smart Home Box into Home Automation
mode. Select ‘6-2 Green Remote/Sensor’, input
Green Remote/Sensor number and select ‘:1
Learning ID’. Wait for the wall switch to send ID
code to the Smart Home Box.
2. Press the OFF knob, a command of OFF signal
and ID signal will send out. Keep holding the
OFF knob for more than 3 seconds until the Smart
Home Box learns the ID code successfully.
INSTALLATION
For the best results, fix the wall switch on a solid
surface, 1.2m above the ground. To affix the wall
switch to an existing wall box, simply secure the bottom
case to the wall box using the 2 screws provided.
Alternatively, you may use the double-side tape
provided to affix it anywhere you desire. After installing,
replace the front case.
TESTING THE WALL SWITCH
Ensure that the system is in Test Mode
On/Off Knob
LED Indicator
ON knob
OFF knob
17

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Elro-HIS20SF

Zoeken resetten

  • wij hebben een his20s alarmsysteem , volgens mij kon ik daar vroeger op inloggen ?
    kan iemand mij daar mee helpen
    marc Gesteld op 23-11-2023 om 16:54

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Elro HIS20SF bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Elro HIS20SF in de taal/talen: Nederlands, Duits, Engels, Frans als bijlage per email.

De handleiding is 1,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info