Step A
This step shows the stove after having been unpacked
and positioned in the room.
Step B
Remove the lower front panel (1), using a screwdriver
as a lever on the upper part, whilst ensuring not to
damage the manual channelling control (if applicable).
Step C
Fasten the lower stone front panel (2) to its support
found beneath the door, using the screws and washers
D.6 supplied.
Use M6 screws and washers to install the upper stone
profile (3) and the cast iron front panel.
Unless already in place, position 4 rubbers in the 4
upper front panel support holes. Then open the door and
fasten the front panels to the structure by applying the
screws supplied to the lower part of the front panels.
Step D
Unless already inserted, place 5 rubbers into the sheet
metal central top and place the stone top on these.
The picture shows all parts necessary to mount the
stone covering, considering that the sides (89) and
spacers (90) are already mounted (the numbers refer to
the exploded diagram shown on page 24).
