1312
Connecting to USB Device of Fresh memory type(Option)
Getting Started
Connecting the microphone for KARAOKE
◆
Before connecting
●
Refer also to the instruction manual of each USB Device to be connected.
●
Before using the USB devices, make sure there is no disc on the machine.
USB function works only under the condition that the display shows “NO DISC” at DVD function mode.
●
Connect the plugs securely.
Connecting Speakers
◆
Before connecting
●
This machine is designed to reproduce optimum sound quality when speakers with the specified impedance below are
connected. Please check the following information and choose speakers with appropriate impedance for the connections.
Front speakers / Center speaker / Surround Speakers : 4 ohms min. per speaker
Woofer speaker : 8 ohm min.
◆
Standard speaker placement
For ideal Surround effects, all speakers should be installed.
Front
The left, right, and center speakers should face the seated
listener and be placed at ear level. The center speaker
reproduces a richer sound image by enhancing the
perception of the sound's source and movement.
Surround
Place the left and right Surround speakers 1 meter (3 feet)
above the listener's ear level and facing toward the sides of
the room, making sure that the listener is within the speakers'
dispersion angle. These speakers reproduce the feel of a
moving sound while creating the sensation of being in the
middle of the action.
Woofer
Install a subwoofer for powerful bass sounds. The placement
of the subwoofer does not affect the final quality of the sound
image too much, so you can install it wherever it is
convenient.
*Note that installing too close to the TV may make a
distortion the TV screen.
Speaker placement plays an important role in the reproduction of Surround sound. The placement of the speakers varies
depending on the size of the room and the wall coverings used in the room. The illustration below shows an example of a layout
for standard speaker placement. Refer to this example when you position the speakers in order to experience the best of
Surround sound.
●
To prevent damage to circuits, never short-circuit the positive (+) and negative (-) speaker wires.
●
Do not connect the speaker cable to the L and R connectors at the same time and do not connect
more than one speaker to the same speaker connectors.
Positioning Speakers
Connecting the Supplied FM Antennas
Making Antenna Connections
◆
Adjusting the position of the FM antenna
While listening to an FM program, extend the
antenna and move it in various directions until
the clearest signal is received, then secure the
antenna with push pins in the position with the
least distortion.
