618062
13
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
170
WARNING: Archimedes II Cressi-sub computer has been
developed for sport diving use only. It is not intended for
commercial or professional use requiring longer dive times
and greater depths. Diving beyond the parameters of sport
diving dramatically increases the risk of decompression
sickness.
DANGER: Cressi-sub discourages diving with
gaseous mixtures other than air without proper training.
The use of “
technical
” multi-gas mixtures may expose the
diver to different risks than those of sport diving, including
serious physical damages and, in extreme cases, death.
WARNING: After a dive with Archimedes II set in
mod. (depth meter-timer). The instrument will
not make saturation and de-saturation computa-
tions during the following 48 hours.
DANGER: Should you decide to reset the instrument
by depressing button RESET on the back of the computer,
the nitrogen memory will be cancelled; therefore; the
instrument will not be able to compute a following dive.
Never use this function for at least 48 hours after the last
diving activity.
To go to program depress button B until the menu
is shown, then depress button C, which you may choose
Archimedes II DIVE/GAGE programs (Picture 7).
NOTE: Archimedes II computer is set at the factory on
program.
program will remain set until the diver changes the pro-
gram to be used.
In program, the INFO, PLAN and SIMU functions are swit-
ched off, while it is possible to set only a maximum depth
alarm which may be switched on or off by the user by setting
the instrument, following the same procedures shown in
chapter 2.5.1.
NOTE: In function the depth indicator gives indica-
tions between 0 – 655.8 ft..
Related topics:
• 2.5.1. – Maximum depth alarm.
3.6. – program (depthometer/timer)
2.5. - Instrument general setting.
2.5.1. - Maximum depth alarm
Archimedes II computer is equipped with a maximum depth
alarm preset at the factory (picture 8 a) on a value of 132 ft.
This is the limit of sport dives. When the function is on (ON)
(picture 8b), upon reaching the set maximum depth a sound
alarm will start and the display will flash for three seconds.
It is possible to switch on the alarm, or modify the maximum
depth, by depressing button B, then button A ( ), selecting,
in the following order, the dive’s parameters relating to:
PO2 Mix 1 -> FO2 Mix 1 -> PO2 Mix 2 -> FO2 Mix 2
-> Safety Factor -> Max Depth -> OFF/ON
While in Max Depth menu (picture 8 a), you may modify the
value of maximum depth from 0 – 325 ft., by depressing but-
ton C ( ). When you have set the desired depth, depress but-
ton A ( ) in order to switch on or off the depth alarm by means
of button C ( ). The computer is set at the factory on the
values of 132 ft. and OFF. Depressing button B (Mode) for seve-
ral seconds will return back to the normal display (picture 1).
i
i
Manuale ARCHIMEDE II 2008:Manuale 6 26-06-2008 8:26 Pagina 170
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cressi Archimede II bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cressi Archimede II in de taal/talen: Engels als bijlage per email.

De handleiding is 4,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info