618062
11
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
168
• FO2 Mix 1 is the oxygen percentage of the primary Nitrox
mixture (MIX1) set on Archimedes II. The diver may vary it on
values between FO2=Air (21%) – basic setting - and FO2=50
% (included), by variations of 1% O2, obtained at each
depression of button C ( );
WARNING: Archimedes II is factory set with the primary
Nitrox mixture on Air (FO2=21%) and the second additional
mixture on Off (FO2= - -%)
NOTE: During the phase of parameters’ setting, by depres-
sing button C ( ), the computer will automatically stop on
standard Nitrox 1 mixture (EAN 32), with an oxygen percen-
tage of 32%. By keeping button C ( ) depressed, it will stop
on (Air) setting. This is to allow the FO2 operations setting to
be set quicker. Additionally, it is possible to set other FO2
values for the mixture (in increments of 1%) each time you
depress button C ( ). The constant depressing of button C
will increase the increments rapidly.
NOTE: By varying of the mixture’s oxygen percentage, the
computer indicates the maximum depth (MAX) which may
be reached with that mixture, since it depends on the PO2
value set.
• PO2 Mix 2 is the partial pressure of the latter of the two
Nitrox mixtures (MIX2) that can be set on Archimedes II
computer. It is factory set on the value of PO2=1.4, but it may
be changed by the diver on values between 1.0 bar (included)
and 1.6 bar (included), by increments of 0.1 bar, following
each other at each depression of button C ( );
• FO2 Mix 2 is the oxygen percentage of the second Nitrox
mixture (MIX2) set on Archimedes II computer. It is factory
set on Off (FO2= - -%) and it may be switched on only by the
diver, by depressing button C ( ), on values between FO2=Air
(21%) and FO2=99% (pure oxygen), by variations of 1%, fol-
lowing each other at each pressure of button C ( )
• A Safety Factor may be set by the diver at one of three
values (SF0/SF1/SF2). It is factory set at SFO.
WARNING: In order to dive more conservatively, please
change your safety factor any time you feel that you are at
risk of decompression sickness.
• The maximum depth alarm is set on ft. 132 and OFF by the
factory (picture 4 a); it can be switched On and be modified
as well as the depth at which it will start (picture 4b), by
depressing button C ( ).
At the end of the setting, depress button B (Mode) for seve-
ral seconds; this will allow you to return to the normal display
(picture 1).
Related topics:
2.5.1. - Maximum depth alarm.
3.1. - AIR DIVE.
3.2. - NITROX MIXTURES DIVE.
Manuale ARCHIMEDE II 2008:Manuale 6 26-06-2008 8:26 Pagina 168
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cressi Archimede II bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cressi Archimede II in de taal/talen: Engels als bijlage per email.

De handleiding is 4,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info