618062
12
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
169
2.3.2 - Dive planning ( ).
While on the surface it is possible to go to the Plan function
( ) in order to visualize the remaining time available at dif-
ferent depths, without having to make decompression stops
(curve time), only by primary mixture MIX1.
The values are given both for the first of a (possible) series of
dives and during the surface interval between two or more
subsequent dives; in such case, Archimedes II takes into
account the residual nitrogen, therefore reducing the curve
times.
When the computer is set on program, by depressing
button B (Mode) twice, you view to the function ( ), as
shown by the alphanumeric display. The display will show (pic-
ture 5, air; picture 5.1., Nitrox) no decompression depths times
between 30 – 157 ft., in depth increments of 10 ft. This is obtai-
ned by depressing C ( ), or by manual depth decreases, each
of ft. 10, by depressing button A ( ).
Depress button B (Mode) for several seconds in order to get
back to the normal display (picture 1).
NOTE: PLAN function will be switched off in program
and in this case the computer shows Error.
Related topics:
2.3.1. - program parameters setting
3.4. - Curve dive
4.1.1. - Surface interval.
3.5.1. - Omitted decompression stage alarm. (Error)
2.3.3. - Rapid visualisation of set data ( ).
The INFO ( ) icon on Archimedes II Cressi-sub computer
UFDS display allows you to visualize, while on the surface,
every set parameter for your dive in a quick and easy manner
(picture 6), when the computer is set on program.
By depressing button A ( ), the computer will display the set
PO2 and the relating maximum depth MAX (given in m or ft.);
the possible setting of a safety factor (SF0/1/2); the possible
oxygen percentage of the primary Nitrox (Mix 1) and the rela-
ting icon ( ), or the icon ( ) in case of an air dive. By
keeping the button depressed, the computer will display the
second mixture’s parameters (if set) in alternative sequel, and
then return to those of the primary.
Related topics:
2.3.1. - program parameters setting
3.1. - AIR DIVE.
3.2. - NITROX MIXTURES DIVE.
2.4. - program parameters setting (deptho-
meter/timer)
The Archimedes II computer is equipped with a third program
( program or depth meter/timer) that may be used for
both apnea (free divers) divers and for the use in technical
dives with helium-based binary and ternary mixtures. In this
case, the instrument gives only the dive’s basic depth and dive
time parameters. It does not make tissue saturation and de-
saturation computation, which must be programmed and
computed by means of proper software and/or tables.
Cressi-sub reminds you that sport dives must be carried out
within the no-decompression guidelines, and at the maximum
depth of 132 ft. This is the limit of sport diving. To exceed these
limits remarkably increases the risk of decompression sickness.
ENGLISH
Manuale ARCHIMEDE II 2008:Manuale 6 26-06-2008 8:26 Pagina 169
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cressi Archimede II bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cressi Archimede II in de taal/talen: Engels als bijlage per email.

De handleiding is 4,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info