588931
32
Verklein
Vergroot
Pagina terug
1/38
Pagina verder
32
In case the heart rate and cadence intervals (with or without the time manager) are used, a second
countdown 2 is initiated automatically after the alarm signal. If this countdown is completed, a short
alarm can be heard and countdown 3 is initiated. After the completion of these countdowns the count-
down starts from countdown 1 again (depending on the preset countdown counter). This lasts as long
as the countdown counter is executed. The countdown can be paused or stopped by pressing the
UM-button again.
Pressing the
UM-button for 3 sec. resets the countdown to the countdown of countdown 1.
The countdown function is also used with the heart rate and cadence time manager (see chap. 8.2)
Autoscroll
Indicates automatically all values in a 3 sec. cycle in the lower display.
7.4 Basic Functions
Light
By pressing the LR-button for 4 seconds the light is turned on for approx. 5 seconds.
Automatic light on
By pressing the
LR-button for 6 seconds the automatic light is turned on. For the next 5 hours the light
will be automatically turned on for 5 seconds when pressing any button.
Automatic light off
By shortly pressing the LR-button and immediately afterwards for 6 seconds the automatic light
function is turned off.
Note: If the light manager is active, at pressing any button the light is turned on only and no function
is executed. While in light mode, you have to press the button again to activate any function. To turn
off the light manager, for example, shortly press LR (light is turned on) and immediately press LR for 6
seconds. So the light manager is turned off.
Attention: Light consumes a lot of battery power, frequent use shortens the life span of the battery
accordingly.
Alarm clock / Alarm
If the set alarm time is reached there is a sound for 20 seconds (switch off by pressing any button).
If the alarm timer is set in the lower left of the display, an alarm symbol will show up. You set and switch
the alarm on/off by the topical, see 6.1 or in the basic settings, see 6.5.
Heart rate alarm
You can switch the heart rate alarm on/off in profile settings (choose ‚Beeper on/off‘) or by pressing UL
for 3 seconds. In the display you see the symbol if the heart rate alarm is on.
If the heart rate alarm is switched on you hear a beep when exceeding the heart rate limit.
Power down mode
(power down mode, see main settings chapter 6)
Your HAC5 can be switch to power down mode which means it doesn’t display anything but keeps all
data stored (except for date and time). This is useful e.g. for battery change but also when the HAC5 is
not used for a longer period.
To set power down mode select in the main settings (press MR for 3 seconds) “powerdown” and
confirm by pressing MR. The display shows
Choose with LR/UR either “powerdown” or “no” and confirm by pressing MR.
To re-start the HAC5 simply press any button.
Autoscroll
Basic Functions
Light
Alarm clock / Alarm
Heart rate alarm
Stromspar-Modus
Lightmngr.
On
For 5 hours
Lightmngr.
Off
HR-Beep
On
HR-Beep
Off
Powerdown
Really?
No
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ciclo HAC 5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ciclo HAC 5 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Ciclo HAC 5

Ciclo HAC 5 Aanvulling / aanpassing - Deutsch - 4 pagina's

Ciclo HAC 5 Snelstart handleiding - Deutsch - 2 pagina's

Ciclo HAC 5 Gebruiksaanwijzing - Deutsch - 38 pagina's

Ciclo HAC 5 Aanvulling / aanpassing - English - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info