588931
37
Verklein
Vergroot
Pagina terug
1/38
Pagina verder
37
required to be initialized for this bike anyway, please run an initialization for the other bike without
transmitter (which breaks off with “error”. Then the transmitter is free for use with the other bike).
Individual values (e.g. distance or average speed) still change at the end of the tour, although
the wheel is at a standstill and displays the speed 0
• the HAC5 has a built-in correction function, so that all values are checked again at the end of the
tour (when no more signals are received SPD 0) and corrected, where appropriate. This correc-
tion function might cause some values to change once again – both up and down.
Some functions don’t appear, although they are activated in the profile
HAC5 is possibly in the baro mode (weather icons on the left side of the display): choose alti mode
in the profile selection display (press UR- and LR-button simultaneously).
Display shows “HR/SPD/CAD: no TX”
• no active transmitter was found and the receiver in the
HAC5 has turned off: restart transmitter
search by pressing the LL-button for three seconds
Current altitude has changed, although the HAC5 wasn’t moved
• the current altitude may change due to weather related air pressure changes, can be manually
adjusted in setting mode with “set altitude”.
13. Guarantee
We offer a guarantee for 2 years from the date of purchase on the CM 8.3A. The guarantee is limited to
material and processing faults. Broken transmitters, or damages of wasted parts of CM 8.3A are exclu-
ded from the guarantee.
The guarantee is valid only if the computer, with accessories, has been handled and maintained carefully
and according to operating instructions.
The guarantee will take place through changes of or repairing the defective parts. The guarantee doens’t
cover direct, indirect or subsequent damages which are related to the product.
This guarantee doesn’t limit any rights of the consumer (considering relative national law) in respect to
the dealer.
To return the CM 8.3A under conditions/terms of the guarantee, please refer to your dealer, your local
distributor or send the computer with the proof of purchase (date) and all accessories and with sufficient
postage to:
CICLO SPORT SERVICE
K. W. Hochschorner GmbH
Konrad-Zuse-Bogen 8
D-82152 Krailling
E-Mail: ciclo-service@ciclosport.de
Please read through the operating manual again carefully before sending in the device and check the
battery.
In case of valid guarantee claims, the repaired device or a replacement device will be returned free of
charge.
Repair:
If your CM 8.3A is sent in for repair (or battery change) or if a guarantee claim is not valid, repairs up to
EUR 19.- will be carried out automatically.
In case of higher repair costs you will be notified. The repaired device will be sent back COD.
14. Technical data
HAC5
Water resistant: 30 m
Operating temperature: - 20°C to + 60°C
Battery: CR 2032 Lithium
Transmitter belt
Reach: 10 m
Operating temperature: 0°C to50°C
Transmission frequency: 868 MHz
Battery: CR2032 Lithium
Speed transmitter / Cadence transmitter
Reach: bis 2 m
Operating temperature: -10°C to 50°C
Transmission frequency: 868 MHz
Battery: CR2032 Lithium
37

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ciclo HAC 5 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ciclo HAC 5 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Ciclo HAC 5

Ciclo HAC 5 Aanvulling / aanpassing - Deutsch - 4 pagina's

Ciclo HAC 5 Snelstart handleiding - Deutsch - 2 pagina's

Ciclo HAC 5 Gebruiksaanwijzing - Deutsch - 38 pagina's

Ciclo HAC 5 Aanvulling / aanpassing - English - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info