658416
22
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
18
Cervélo Owner’s Manual
make sure that you have maximum friction available, keep your
wheel rims and brake pads clean and free of dirt, lubricants, waxes or
polishes.
Brakes are designed to control your speed, not just to stop the bike.
Maximum braking force for each wheel occurs at the point just
before the wheel “locks up” (stops rotating) and starts to skid. Once
the tire skids, you actually lose most of your stopping force and all
directional control. You need to practice slowing and stopping
smoothly without locking up a wheel. The technique is called
progressive brake modulation. Instead of jerking the brake lever to
the position where you think you’ll generate appropriate braking
force, squeeze the lever, progressively increasing the braking force.
If you feel the wheel begin to lock up, release pressure just a little
to keep the wheel rotating just short of lockup. It’s important to
develop a feel for the amount of brake lever pressure required for
each wheel at different speeds and on different surfaces. To better
understand this, experiment a little by walking your bike and
applying different amounts of pressure to each brake lever, until
the wheel locks.
When you apply one or both brakes, the bike begins to slow, but
your body wants to continue at the speed at which it was going.
This causes a transfer of weight to the front wheel (or, under heavy
braking, around the front wheel hub, which could send you flying
over the handlebars).
A wheel with more weight on it will accept greater brake pressure
before lockup; a wheel with less weight will lock up with less brake
pressure. So, as you apply brakes and your weight is transferred
forward, you need to shift your body toward the rear of the bike, to
transfer weight back on to the rear wheel; and at the same time, you
need to both decrease rear braking and increase front braking force.
This is even more important on descents, because descents shift
weight forward.
Two keys to effective speed control and safe stopping are controlling
wheel lockup and weight transfer. Practice braking and weight transfer
techniques where there is no traffic or other hazards and distractions.
Everything changes when you ride on loose surfaces or in wet weather.
Tire adhesion is reduced, so the wheels have less cornering and braking
traction and can lock up with less brake force. Moisture or dirt on the
brake pads reduces their ability to grip. The way to maintain control
on loose or wet surfaces is to go more slowly to begin with.
D. Shifting Gears
Your multi-speed bicycle will have a derailleur drivetrain.
1. How a derailleur drivetrain works
The parts of the gear-changing mechanism include:
• a rear cassette or freewheel sprocket cluster
• a rear derailleur
• usually a front derailleur
• one or two shifters
• one, two or three front sprockets called chainrings
• a drive chain
a. Shifting Gears
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cervelo Multi-speed racing bicycles bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cervelo Multi-speed racing bicycles in de taal/talen: Engels als bijlage per email.

De handleiding is 0,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info