658416
20
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
16
Cervélo Owner’s Manual
until it comes out of the rear dropouts.
d. Installing a Quick Release Rear Wheel
(1) Make sure that the rear derailleur is still in its outermost, high
gear, position
(2) Pull the derailleur body back with your right hand.
(3) Move the quick-release lever to the OPEN position (see fig. 6).
The lever should be on the side of the wheel opposite the
derailleur and freewheel sprockets.
(4) Put the chain on top of the smallest freewheel sprocket. Then,
insert the wheel up and back into the frame dropouts and pull
it all the way in to the dropouts.
(5) Tighten the quick-release adjusting nut until it is finger tight
against the frame dropout; then swing the lever toward the front
of the bike until it is parallel to the frame’s chainstay or seatstay and
is curved toward the wheel (fig. 7). To apply enough clamping
force, you should have to wrap your fingers around a frame tube
for leverage, and the lever should leave a clear imprint in the palm of
your hand.
WARNING: Securely clamping the wheel takes considerable
force. If you can fully close the quick release without wrapping
your fingers around the seatstay or chainstay for leverage, and
the lever does not leave a clear imprint in the palm of your
hand, the tension is insufficient. Open the lever; turn the
tension adjusting nut clockwise a quarter turn; then try again.
force. If you can fully close the quick release without wrapping
your fingers around the fork blade for leverage, and the lever
does not leave a clear imprint in the palm of your hand, the
tension is insufficient. Open the lever; turn the tension adjusting
nut clockwise a quarter turn; then try again.
(5) If the lever cannot be pushed all the way to a position parallel to the
fork blade, return the lever to the OPEN position. Then turn the tension
adjusting nut counterclockwise one-quarter turn and try tightening
the lever again.
(6) Re-engage the brake quick-release mechanism to restore correct
brake pad-to-rim clearance; spin the wheel to make sure that it is
centered in the frame and clears the brake pads; then squeeze the
brake lever and make sure that the brakes are operating correctly.
c. Removing a Quick Release Rear Wheel
(1) Shift the rear derailleur to high gear (the smallest, outermost
rear sprocket).
(2) If your bike has rim brakes, disengage the
brake’s quick-release mechanism to increase
the clearance between the wheel rim
and the brake pads (see Section 4.C, fig. 8 and
9).
(3) Pull the derailleur body back with your right hand.
(4) Move the quick-release lever to the OPEN position (fig. 6).
(5) Lift the rear wheel off the ground a few inches and, with the
derailleur still pulled back, push the wheel forward and down
fig. 7
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cervelo Multi-speed racing bicycles bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cervelo Multi-speed racing bicycles in de taal/talen: Engels als bijlage per email.

De handleiding is 0,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info