658416
19
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
15
Cervélo Owner’s Manual
device. As its name implies, it serves as a
back-up for a critical adjustment. If the quick
release is not adjusted correctly, the
secondary retention device can reduce the
risk of the wheel
disengaging from the fork. Removing or
disabling the secon-
dary retention device may also void the
warranty.
Secondary retention devices are not a substitute for correct
quick release adjustment. Failure to properly adjust the
quick release mechanism can cause the wheel to wobble or
disengage, disengage, which could cause you to loose control
and fall, resulting in serious injury or death.
2. Removing and Installing Quick Release Wheels
a. Removing a Quick Release Front Wheel
(1) If your bike has rim brakes, disengage the brake’s quick-release
mechanism to increase the clearance between the tire and the
brake pads (See Section 4.C fig. 8 and 9).
(2) Move the wheel’s quick-release lever from the locked or CLOSED
position to the OPEN position (fig. 6). Quick release levers should
be embossed with the words “OPEN” and “CLOSED” to indicate
the current position of the lever.
(3) If your front fork does not have a secondary retention device go
to step (5).
(4) If your front fork has a clip-on type secondary retention device,
disengage it and go to step (5). If your front fork has an integral
secondary retention device, loosen the tension adjusting nut
enough to allow removing the wheel; then go to the next step.
(5) Raise the front wheel a few inches off the ground and tap the
top of the wheel with the palm of your hand to release the
wheel from the front fork.
b. Installing a Quick Release Front Wheel
(1) Move the quick-release lever so that it curves away from the
wheel (fig. 6). This is the OPEN position.
(2) With the steering fork facing forward, insert the wheel between
the fork blades so that the axle seats firmly at the top of the slots
which are at the tips of the fork blades — the fork dropouts. The
quick-release lever should be on the left side of the bicycle. If your
bike has a clip-on type secondary retention device, engage it.
(3) Holding the quick-release lever in the OPEN position with your
right hand, tighten the tension adjusting nut with your left hand
until it is finger tight against the fork dropout (fig. 6).
(4) While pushing the wheel firmly to the top of the slots in the fork
dropouts, and at the same time centering the wheel rim in the fork,
move the quick-release lever upwards and swing it into the CLOSED
position (fig. 5). The lever should now be parallel to the fork blade
and curved toward the wheel. To apply enough clamping force, you
should have to wrap your fingers around the fork blade for leverage,
and the lever should leave a clear imprint in the palm of your hand.
WARNING: Securely clamping the wheel takes considerable
fig. 6
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cervelo Multi-speed racing bicycles bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cervelo Multi-speed racing bicycles in de taal/talen: Engels als bijlage per email.

De handleiding is 0,43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info