656752
15
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
551R V2azur
15
ENGLISH
ENGLISH
Once nished the unit will display a screen similar to the one below reporting
which speakers were found and any that appear out of phase.
azur 551R
Continue : [ENTER]
The speakers that have been
found are:
L C R SL SR LB RB SW
All speakers are in phase
If any speakers appear unconnected or out of phase carefully check the
connections on the speaker and the back of the unit. Also check any bi-wiring
links that might be present on the speaker. For any out of phase speakers
check that the relevant + terminal of the 551R V2 goes to the + terminal
of that speaker and similarly the terminal of the 551R V2 goes to the
terminal of the speaker for that channel.
If necessary press the OSD button to perform a retest or press Enter to start
the second part of the auto setup procedure as below.
azur 551R
The unit is now measuring the
Distance and Level settings for
your speakers
Please wait....
Again a series of test signals will now be output from all of the connected
speaker terminals and Subwoofer. The 551R V2 uses these to measure the
levels and distances (and hence introduce the correct delays) appropriate to
your speakers and room characteristics.
When the auto setup of the 551R V2 is completed successfully, the 551R V2
will return to the Auto Setup Menu.
azur 551R
Video In. Select
Audio In. Select
Tone/Sub Config.
Speaker Config.
Speaker Distance
Speaker Level
Speaker Xover
Auto Setup
Advanced Setup
OSD Setup
Please press ENTER to start
auto setup.
WARNING: High Volume Test Tones
Quit: [I/O] Enter: [ENTER]
The Speaker Distance and Level Calibration settings for each speaker will
have been updated.
It is of course now possible to go into the Speaker Delay and Level
Calibration menus if you want to manually check/adjust the settings made by
the CAMCAS system, and it is always advisable to check them as no system
can be totally foolproof.
To exit the auto setup menu of the 551R V2 continue to press the OSD
button on the remote control to exit all menus or until 'OSD 'is no longer
displayed on the front panel. You can now unplug the microphone and put
it away for future use.
Note:
If the auto setup of the 551R V2 is unsuccessful for some reason a 'Fail'
message will appear on the OSD. Included in this message will be details
of the speaker channel or channels which have not been successfully
adjusted. If this is the case, please again check that the speaker or
speakers detailed in the OSD as 'failed' are connected correctly & have
not been wired out of phase. Also check the microphone connection and
any other external issues that could have affected the tests such as noise
in the room etc.
Like all such systems CAMCAS has some limitations. Speakers that exhibit
very strong phase angles or deliberately wire some drive units out of phase
can of course appear to the system as an out of phase speaker when
correctly connected. If a speaker is reported as out of phase but is correctly
wired please consult the speakers manufacturer in case this is the case.
Similarly bi-polar speakers which radiate in more than one direction can
make it difcult to measure the distance and sometimes level accurately as
you might expect.
In all cases it is always advisable to manually check the settings CAMCAS has
made for a 'reality check' to ensure there are no obvious errors.
3. Assigning Video inputs
The 551R V2 has 6 HDMI (High Denition Multi-Media Interface) inputs,
and 2 HDMI outputs. HDMI is a fully digital audio/video system for picture
and audio in digital format for best possible picture quality. DVI (Digital
Video Interface) is a subset of HDMI that uses different connectors and only
supports digital video (no audio). The 551R V2 is compatible with DVI in that
simple passive DVI-HDMI adaptors are available which allow the conversion
of the DVI connector to an HDMI format connector (and back again if
required) for routing via the 551R V2.
HDMI outputs on Blu-ray, DVD players and Set-top boxes also often support
higher resolution formats including progressive scan types. Consult both your
HDMI source and TV manuals for details, it is often possible to select from
various options, you will want to select the highest quality output that both
your source and TV are compatible with.
From Blu-ray players, HDMI can also carry the latest Dolby Digital Plus and
True-HD formats as well as DTS-HD High Resolution and Master Audio.
Ensure that the HDMI output of your player has been set to 'Bitstream' or
'Raw' to pass the formats to the 551R V2 for decoding.
Also some Blu-ray players feature settings to allow down conversion of Dolby
Digital Plus etc. to backwards compatible Dolby Digital 5.1 for older AV
receivers which do not support these formats.
Ensure any such settings are disabled to allow our 551R V2 access to all
the latest formats.
For all the above reasons HDMI is the preferred connection method for both
Audio and Video.
Select the Video In. Select menu.
For each source the currently selected video input type will be shown. It is
possible to assign any of the video input sockets to each source in turn,
except Tape/MD/CDR source which is audio only.
The Options are HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5 and HDMI 6.
azur 551R
Video In. Select
Audio In. Select
Tone/Sub Config.
Speaker Config.
Speaker Distance
Speaker Level
Speaker Xover
Auto Setup
Advanced Setup
OSD Setup
BD/DVD
CD/Video 1
Video 2
Video 3
Aux/TV
7.1 Direct
Back: [I/O]
HDMI 1 < >
HDMi 2 < >
HDMi 3 < >
HDMi 4 < >
HDMi 5 < >
HDMi 6 < >
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cambridge Audio Azur 551R V2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cambridge Audio Azur 551R V2 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Cambridge Audio Azur 551R V2

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Nederlands - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Deutsch - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Français - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Italiano - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Espanõl - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Polski - 30 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info