656752
14
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
14
Speaker conguration cont.
azur 551R
Video In. Select
Audio In. Select
Tone/Sub Config.
Speaker Config.
Speaker Distance
Speaker Level
Speaker Xover
Auto Setup
Advanced Setup
OSD Setup
Unit
Front L
Front R
Center
Surr. L
Surr. R
Surr. LB
Suur. RB
Back: [I/O]
Meters < >
2.9 < >
2.9 < >
2.9 < >
2.0 < >
2.0 < >
2.0 < >
2.0 < >
Note: In addition to the delays as set above Dolby Pro Logic II/IIx playback
also requires an extra 15 milliseconds delay to the surround channels only.
This extra delay is part of the Dolby Pro Logic II specication and ensures that
sound from the surrounds arrives just after sound from the front reducing the
audibility of sound leakage from the front to the surround speakers. Because
the relationship between the Dolby Digital and Dolby Pro Logic IIx two delays
is xed (15mS extra to the surround channels), it is only necessary to set the
delay by measuring the distances as we have described. The 551R V2 will
automatically provide the appropriate extra delay whenever you switch to a
Dolby Pro Logic Mode.
Level calibration
The 551R V2 allows level calibration to match the acoustic level between
different types/sizes or even manufacturers of speaker that may be being
used for each channel. This is achieved by adjusting the relative level of
each speaker. This can be done manually through the 'Level Calibration'
menu in the OSD or automatically, see the following Auto setup section of
this manual.
The basic process for manual adjustment is to listen to or measure with a
Sound Pressure Level (SPL) meter (more accurate and recommended but
not essential) the level of sound produced by each speaker and set relative
levels for each speaker so that they all sound the same loudness at the
normal listening position. The 551R V2 incorporates a Test Signal Generator
(broad-band white noise) to facilitate this.
Press the OSD button on the remote control then select the 'Level Calibration'
menu. Now turn on the test signal by highlighting this item and pressing the
or ► arrows:
azur 551R
Video In. Select
Audio In. Select
Tone/Sub Config.
Speaker Config.
Speaker Distance
Speaker Level
Speaker Xover
Auto Setup
Advanced Setup
OSD Setup
Test Signal
Front L
Front R
Surr. L
Surr. R
Center
Subwoofer
Surr. LB
Surr. RB
Back: [I/O]
Off < >
0dB < >
0dB < >
0dB < >
0dB < >
0dB < >
0dB < >
0dB < >
0dB < >
You can now move up and down the channels using the ▲ and ▼ buttons on
the remote. Each time a new channel is selected the test signal will be heard
to move to that channel. Compare the loudness of all channels as heard at
the listening position.
A "rushing" or "hissy" sound should be heard.
Now adjust the channels so they all sound the same (in terms of loudness
only, channels of different frequency responses can sound different in terms
of the "tone" of the sound i.e. more or less hissy).
Pick the channel that sounds most different and select it to listen to the
test signal. Now adjust the relative level in dB (using Arrow left/right on
the remote) and continue comparing it to other channels until it is of equal
loudness. The level can be adjusted up to + or - 10dB in 1dB steps. Repeat
the process with the next most different channel. Once all channels sound
the same in terms of loudness, press the OSD button again to save the
settings and exit the menu.
Auto speaker setup for Distance/Level
Important note: Please remember that test signals generated from Auto
setup are loud.
The 551R V2 includes our simple automatic speaker setup system called
'CAMCAS' (Cambridge Audio Mic Controlled Auto Setup). The system performs
two sets of tests rstly checking which speakers are connected and whether
they are wired correctly and in phase then second automatically measuring
and adjusting the speaker delay timings (i.e. distance setting ) and levels.
Before activating this feature the 'Decode Mode' (i.e. type of speaker
package e.g. 5.1, 7.1) of the 551R V2 and Large/Small/None status of each
speaker must be set correctly as per section 1. This is important as the unit
will only look for and check the speakers you have told it you have.
To perform Auto Distance/Level setup rst connect the supplied microphone
to the front Left front panel audio input on the front panel and place it at your
normal listening position in the room.
Press the OSD button on the remote control to access the OSD and select the
option 'Auto Setup'. This will access the 'Auto Setup Menu' as below.
azur 551R
Video In. Select
Audio In. Select
Tone/Sub Config.
Speaker Config.
Speaker Distance
Speaker Level
Speaker Xover
Auto Setup
Advanced Setup
OSD Setup
Please press ENTER to start
auto setup.
WARNING: High Volume Test Tones
Quit: [I/O] Enter: [ENTER]
Follow the on-screen instructions and press 'Enter' on the remote control
when ready to start the Auto Setup function.
azur 551R
Continue : [ENTER]
Plug the microphone into the
Mic. input on the front panel
and place the microphone at
normal listening position and
height.
Once activated the OSD will display the message below and the word
'AUTOSETUP' will also be displayed on the front panel of the 551R V2 to
conrm.
azur 551R
The unit is now checking which
speakers are connected and their
phase
Please wait....
A series of test signals will now be output from all of the connected speaker
terminals of the 551R V2 (including the Subwoofer output).
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cambridge Audio Azur 551R V2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cambridge Audio Azur 551R V2 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cambridge Audio Azur 551R V2

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Nederlands - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Deutsch - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Français - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Italiano - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Espanõl - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Polski - 30 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info