656752
13
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
551R V2azur
13
ENGLISH
ENGLISH
4
Subwoofer
For improving the bass in your system, as well as reproducing dedicated
LFE (Low Frequency Effects) cinema effects when playing Dolby Digital or
DTS encoded discs. Your subwoofer can often be placed almost anywhere
in the room as bass is less directional, but experimentation with positioning
is recommended.
5
Surround Back Left and Right speakers
Individual back speakers in place of a single surround back. Used with the
7.1 processing types. Remember to experiment with the positions until you
are happy with the sound.
In each case the 5.1/7.1 in fact relates to the maximum number of
speakers that can be used, as the Centre, Sub and Surround speakers can
all be deleted if required (although of course performance is reduced). For
example, if you choose not to use a Centre Channel speaker you can set this
to 'None' in the settings as shown later and the 551R V2 will automatically
redirect the centre channel audio information into the Left and Right Front
channels, creating what is known as a 'Phantom Centre'.
Similarly, you might decide not to use a subwoofer if your main Left and Right
speakers are capable of reproducing enough bass for a satisfying music/
movie experience. The 551R V2 will then automatically re-direct the bass
from the Subwoofer/Low Frequency Effect channel to the Left and Right
Front Speakers.
Note: This setup is very important as the 551R V2 will also automatically
use this information to select appropriate Dolby and DTS decoding modes
dependant not only on the source material but also the speaker package
it knows you have.
To tell the unit the type of package you have, turn on the On-Screen Display
via the remote button as shown. Highlight the 'Speaker Cong.' menu by
using the ▲ and ▼ button on the remote then go to it by pressing the Enter
button:
azur 551R
Video In. Select
Audio In. Select
Tone/Sub Config.
Speaker Config.
Speaker Distance
Speaker Level
Speaker Xover
Auto Setup
Advanced Setup
OSD Setup
Decode Mode
Front L/R
Center
Surr. L/R
Surr. LB/RB
Subwoofer
Quit: [I/O] Enter: [ENTER]
7.1 < >
Large < >
Small < >
Small < >
Small < >
Yes < >
Set the Decode mode as 5.1 or 7.1 by highlighting the Decode Mode menu
item and using the ◄ and ► buttons to scroll through the options:
azur 551R
Video In. Select
Audio In. Select
Tone/Sub Config.
Speaker Config.
Speaker Distance
Speaker Level
Speaker Xover
Auto Setup
Advanced Setup
OSD Setup
Decode Mode
Front L/R
Center
Surr. L/R
Surr. LB/RB
Subwoofer
Back: [I/O]
7.1 < >
Large < >
Small < >
Small < >
Small < >
Yes < >
Now move down by highlighting each speaker in turn and using the ◄ and
buttons, then select from 'Large', 'Small' or 'None' for each speaker. 'Large' or
'Small' are used to describe each speaker in terms of bass response, they do
not necessarily reect the actual physical size of the speaker.
Large – Speakers with an extended low frequency response of approximately
20-40Hz to 16-20kHz (oorstanders or high quality larger stand-mounted
speakers).
Small – Speakers with a less extended low frequency response of
approximately 80-100Hz to 16-20kHz (small stand-mounted, bookshelf or
satellite speakers).
Setting each speaker allows the 551R V2 to perform what is called Bass
Management and to direct low frequency bass from music and the Low
Frequency Effects channel of surround sound material to those speakers
best able to reproduce it. If you do not wish to use any of the speakers set
its setting to 'None'.
The Subwoofer output can also be set to Yes or No. If no sub is being used
make sure this setting is set to No to allow the 551R V2 to re-direct the bass
information in this channel to other speakers.
Note: The 551R V2 will force some speakers to certain settings in the
following circumstances!
The Front Left and Right speakers may be 'Large' or 'Small' but never 'None'
as they are always required for any type of music/movie reproduction.
Bass must always be reproduced by either the Front Left and Right or
Subwoofer channel (or both). Setting the Front Left and Right to 'Small'
will result in the Subwoofer automatically being set to 'Yes'. Setting the
Subwoofer to 'No' will automatically result in the Front Left and Right being
set to 'Large'.
If the Front Left and Right cannot reproduce low frequency bass a Subwoofer
must be used, i.e. If the Front Left and Right are set as 'Small' the Sub must
be Set to 'Yes'.
Also, setting the Front Left and Right as 'Small' will always set the other
speakers as 'Small' (and the Sub to 'Yes'). This is because LFE/ bass
information should not be redirected to the surround channels.
To store the setting simply come back out of the OSD (pressing the OSD
button always moves back one menu item, and then exits and stores from
the main menu screen).
2. Speaker setup
The following two sections can be performed by Cambridge Audio CAMCAS
procedure so you can if you wish jump straight to that section. However, it is
recommended that you do read these sections to understand the reasons for
these settings and their implications.
Speaker delay
Because the speakers in a surround sound system are usually different
distances from the listener the 551R V2 incorporates the ability to apply a
variable digital delay to each of the channels so that the sound from each
arrives at the same time at the listening position for best surround-sound
effect.
To set the delay times automatically, refer to the Auto setup section of this
manual.
To set the delay times manually, simply measure the distances from the
listening position to each speaker as shown in the following diagram:
2
1
3
7
6
4
8
5
1 = Front Left speaker
2 = Front Right speaker
3 = Centre speaker
4 = Surround Left speaker
5 = Surround Right speaker
6 = Surround Back Left
(when used)
7 = Surround Back Right
(when used)
8 = Subwoofer (can be placed
almost anywhere)
Note: No delay setting for the subwoofer is necessary.
Set the distances in the OSD Speaker Distance menu to the nearest value
in metres (1 foot = 0.3 metres). The speed of sound is approx. 340 metres
per second, the 551R V2 thus introduces approx. 3mS of delay per metre
of distance set.
Go to the 'Speaker Distance' and highlight each speaker in turn. Set the
distance to the nearest value to that which you measured by using the Left
and Right arrows (the values do not need to be exact):
Press the OSD button to exit the menu.
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cambridge Audio Azur 551R V2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cambridge Audio Azur 551R V2 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Cambridge Audio Azur 551R V2

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Nederlands - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Deutsch - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Français - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Italiano - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Espanõl - 28 pagina's

Cambridge Audio Azur 551R V2 Gebruiksaanwijzing - Polski - 30 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info