79225
23
Verklein
Vergroot
Pagina terug
1/153
Pagina verder
English - 6
Switching On and Off
Hold chain saw as described in “Cutting”.
For switching on the machine, press the lock-off
button 3, then fully press the On/Off switch 2 and
hold in this position. The lock-off button 3 can now
be released.
For switching off, release the On/Off switch 2.
Do not stop chain saw after sawing by activating
the front hand guard (kickback brake).
The kickback brake is a safety mechanism acti-
vated through the front hand guard 5, when kickback
occurs. Chain stops immediately.
The following function check should be carried out at
regular intervals. Push front hand guard 5 forward
(position ) and start the chain saw. The chain must
not start. To deactivate the kickback brake, release
On/Off switch 2 and pull hand guard 5 backwards
(position ).
Before Cutting
Before and periodically during cutting check as fol-
lows:
Is the chain saw in a fail-safe condition?
Is the oil reservoir filled? Check oil level
gauge 25 prior to starting and regularly during op-
eration. Refill oil when oil level is low. The oil tank
filling will last approx. 15 minutes, depending on
sawing intensity and stops.
Is the chain tension in order and is the chain
sharp? Check chain tension every 10 minutes
during operation. Upon initial operation, new
chains can lengthen considerably. The condition
of the chain influences the the cutting perform-
ance. Only a sharp chain protects from overload.
Is the kickback brake deactivated and its function
ensured?
Are you wearing the necessary protective equip-
ment? Wear safety glasses and hearing protec-
tion. Further protective equipment for head, hand,
legs and feet is recommend. Adequate protective
clothing will reduce personal injury by flying de-
bris or accidental contact with saw chain.
Kickback
Kickback is the sudden backward/upward motion of
the chain saw, occuring when the chain (at the tip of
the chain bar) comes in contact with a log or wood,
or when the chain becomes jammed.
When kickback occurs the chainsaw reacts unpred-
icably and can cause severe injuries to the operator
or bystanders.
Particular attention must be given when sawing
sidewards, slanted or during length cuts, as the grip-
ping teeth 11 usually can not be applied.
To avoid kickback:
Saw with the chain bar at a flat angle.
Never work with a loose, widely stretched or the
heavily worn out chain.
Ensure chain is sharpened correctly.
Never saw above shoulder height.
Never work with the tip of the chain bar.
Always the hold chain saw firmly with both hands.
Always use a Bosch low-kickback chain.
Apply the metal gripping teeth 11 for leverage.
Ensure correct chain tension.
General Behavior
Always hold the chain saw firmly with both
hands. Front grip with the left hand and rear grip with
the right hand. Fully grip both handles at all times
during operation. Never operate chain saw using
only one hand. Ensure power cord is located to the
rear, away from the chain and wood and so pos-
tioned that it will not be caught on branches or the
like during cutting.
Use the chain saw only with secure footing. Hold
the chain saw at the right-hand side of your body.
The chain must be running at full speed before it
makes contact with the wood. Use the metal grip-
ping teeth 11 to secure the saw onto the wood be-
fore starting to cut. Use the gripping teeth as a lev-
erage point “X” while cutting.
Reset the gripping teeth at a lower point when saw-
ing thicker logs by pulling the chain saw slightly
backwards until the gripping teeth release, and repo-
sition at lower level to continue sawing. Do not re-
move the saw completely from the wood.
Do not force the chain while cutting, let the chain do
the work, using the gripping teeth 11 to apply mini-
mal leverage pressure.
Do not operate the chain saw with arms fully ex-
tended or attempt to saw areas which are difficult to
reach, or on a ladder. Never use the chain saw
above shoulder height.
Sawing is optimized when the chain speed remains
steady during cutting.
Beware when reaching the end of the cut. The
weight of the saw may change unexpectedly as it
cuts free from the wood. Accidents can occur to the
legs and feet.
Always remove the saw from a wood cut while the
saw is running.
Kickback Brake
Cutting
D
B
D
D
E
F
G
F 016 L70 540.book Seite 6 Montag, 9. Februar 2009 2:37 14
23 • F 016 L70 540 • TMS • 29.01.09
23

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GKE 40 BCE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GKE 40 BCE in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 4,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info