79225
25
Verklein
Vergroot
Pagina terug
1/153
Pagina verder
English - 8
Bucking a Log
Bucking is cutting a log into lengths. It is impor-
tant to make sure your footing is firm and your weight
is evenly distributed on both feet. When possible,
the log should be raised and supported by the use of
limbs, logs or chocks. Follow the simple directions
for easy cutting.
When the log is supported along its entire length as
illustrated, it is cut from the top (overbuck).
When the log is supported on one end, as illus-
trated, cut 1/3 the diameter from the underside (un-
derbuck). Then make the finished cut by overbuck-
ing to meet the first cut.
When the log is supported on both ends, as illus-
trated, cut 1/3 the diameter from the top overbuck.
Then make the finished cut by underbucking the
lower 2/3 to meet the first cut.
When bucking on a slope always stand on the
uphill side of the log, as illustrated. When "cutting
through”, to maintain complete control release the
cutting pressure near the end of the cut without re-
laxing your grip on the chain saw handles. Don’t let
the chain contact the ground. After completing the
cut, wait for the saw chain to stop before you move
the chain saw. Always stop the motor before moving
from tree to tree.
Before any work on the machine itself, pull
the mains plug from the socket.
Note: To ensure long and reliable service, carry out
the following maintenance regularly.
Regularly check for obvious defects such as loose,
dislodged or damaged chain and chain bar, loose
fixings and worn or damaged components.
Check that covers and guards are undamaged and
correctly fitted. Carry out necessary maintenance or
repairs before using the chain saw.
If the chain saw should happen to fail despite the
care taken in manufacturing and testing, repair
should be carried out by an authorized customer
service agent.
Before returning, ensure all oil in the oil tank has
been emptied.
For all correspondence and spare parts orders, al-
ways include the 10-digit part number (TYP) from
the nameplate of the machine!
Fit the chain and chain bar as described in “Assem-
bly and Tensioning Chain”.
The circular groove of the chain bar will wear partic-
ularly on the lower edge with time. When replacing
the chain turn the chain bar 180° to allow even wear,
thus extending chain bar life.
Check drive sprocket 20. If it is worn out or damaged
due to strain, have it exchanged by an authorized
Bosch service agent.
Have your chain sharpened professionally at your
Bosch approved service agent or sharpen the chain
yourself using the Bosch sharpening kit or a Dremel
power tool with the appropriate grinder (1453), both
available at your Bosch approved service agent. Fol-
low the sharpening instructions supplied with the
sharpening kit.
Proper functioning of the automatic oiler can be
checked by running the chain saw and pointing the
tip of the chain bar towards a piece of cardboard or
paper on the ground. Caution: Do not touch the
ground with the chain. Ensure safety clearance of
20 cm. If an increasing oil pattern developes, the au-
tomatic oiler is operating fine. If there is no oil pat-
tern, despite a full oil reservoir, see “Fault Finding” or
contact your Bosch approved service agent.
Chain and Chain bar
AKE 30 S .......................................... F 016 800 259
AKE 35 S .......................................... F 016 800 260
AKE 40 S .......................................... F 016 800 261
Chain
AKE 30 S .......................................... F 016 800 256
AKE 35 S .......................................... F 016 800 257
AKE 40 S .......................................... F 016 800 258
Cleaning
Chain sharpening/cleaning kit .......... F 016 800 262
Chain oil 1 litre .................................. 2 607 000 181
Maintenance
L
M
N
O
Replacing/Changing Chain and
Chain Bar
Sharpening Chain
Checking the Automatic Oiler
Accessories
F 016 L70 540.book Seite 8 Montag, 9. Februar 2009 2:37 14
25 • F 016 L70 540 • TMS • 29.01.09
25

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GKE 40 BCE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GKE 40 BCE in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 4,63 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info