786454
18
Verklein
Vergroot
Pagina terug
1/255
Pagina verder
18 | English
may significantly increase noise emissions over the total
working period.
To estimate noise emissions accurately, the times when the
tool is switched off, or when it is running but not actually be-
ing used, should also be taken into account. This may signi-
ficantly reduce noise emissions over the total working
period.
Assembly
uAvoid starting the power tool unintentionally. The
mains plug must not be connected to the power supply
during assembly or when carrying out any kind of
work on the power tool.
Items included
Carefully remove all parts included in the delivery from their
packaging.
Remove all packing material from the power tool and the ac-
cessories provided.
Check to ensure that all the parts listed below have been
supplied before using the power tool for the first time:
Cut-off grinder with cutting disc fitted
Hex key (12)
Note: Check the power tool for possible damage.
Before continuing to use the power tool, carefully check that
all protective devices or slightly damaged parts are working
perfectly and according to specifications. Check that the
moving parts are working perfectly and without jamming;
check whether any parts are damaged. All parts must be fit-
ted correctly and all the conditions necessary to ensure
smooth operation must be met.
If the protective devices or any parts become damaged, you
must have them properly repaired or replaced by an author-
ised service centre.
Stationary or flexible mounting
uTo ensure safe handling, the power tool must be
mounted on a flat, stable work surface (e.g. work
bench) before use.
Mounting on a work surface (see figure A)
Use suitable screw fasteners to secure the power tool to
the work surface. Use the holes (11) to do this.
Flexible installation (not recommended)
In exceptional circumstances, if it is not possible to securely
mount the power tool on a work surface, you can improvise
by placing the feet of the base plate (13) on an appropriate
base (e.g. workbench, flat ground, etc.), without screwing
down the power tool.
Changing the Cutting Disc (seefiguresB1−B2)
uPull the plug out of the socket before carrying out any
work on the power tool.
uDo not activate the spindle lock (5) while the tool
spindle (22) is moving. The power tool may become
damaged if you do this.
uDo not touch the cutting disc after use until it has
cooled. The cutting disc becomes very hot during use.
Only use cutting discs that match the specifications given in
this operating manual and that have been tested and marked
in accordance with EN 12413.
Use any intermediate layers provided with the cutting disc.
Place unused cutting discs in an enclosed container or their
original packaging. Store the cutting discs lying flat.
Removing the cutting disc
Bring the power tool into the work position.
Swivel the retracting blade guard (4) backwards as far as
possible.
Turn the hexagon screw (25) using the hex key (12)
provided while pressing the spindle lock (5) until it en-
gages.
Hold the spindle lock down and unscrew the hexagon
screw (25).
Remove the washer (24) and the clamping flange (23).
Remove the cutting disc (6).
Fitting the cutting disc
If required, clean all the parts you want to fit before installing
them.
Place the new cutting disc on the tool spindle (22) such
that the sticker points away from the tool arm.
Fit the clamping flange (23), the washer (24) and the
hexagon screw (25). Press the spindle lock (5) until it en-
gages and retighten the hexagon screw (25) by turning it
clockwise. (Tightening torque approx. 18–20Nm)
Slowly guide the retracting blade guard (4) all the way
down until the cutting disc is completely covered.
Make sure that the retracting blade guard (4) is working
properly.
After fitting the cutting disc, check that the cutting disc is fit-
ted correctly and can turn freely before switching on the
power tool.
Make sure that the cutting disc does not brush against the
retracting blade guard (4), the fixed protective guard
(20) or any other parts.
Put the power tool into operation for approx. 30 seconds.
If there is substantial vibration, switch the power tool off
immediately, remove the cutting disc and then refit it.
Operation
uPull the plug out of the socket before carrying out any
work on the power tool.
Transport Safety Lock (see figure C)
The transport safety lock (17) makes it easier to handle the
power tool when transporting it to various working locations.
Unlocking the power tool (work position)
Press the tool arm down slightly by the handle (3) to re-
lease the transport safety lock (17).
Pull the transport safety lock (17) all the way out.
1 609 92A 7ND | (26.04.2022) Bosch Power Tools
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch GCO 14-24 J bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch GCO 14-24 J in de taal/talen: Alle talen als bijlage per email.

De handleiding is 10.85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info